
DoombiqMovedHoles
Architeuthis-Flux/Doombiq
An ultra low power, energy harvesting board that lets you "run" Doom

Hardware files for the EarWorm project.
Earworm hardware is an open-source printed circuit board by jeff-shulkin, from the jeff-shulkin/earworm_hardware repository on GitHub. It is a 4-layer board of 19.1 × 26.3 mm with 49 parts on 60 nets, routed with 222 tracks and 65 vias.
It is built around the ADXL367BCCZ-RL7 and LPR6235-752SMRC. Its parts include 22 capacitors, 8 resistors, 4 inductors, 3 ICs and 3 connectors. It belongs with the nRF52 and nRF5x boards of this library.
Ambient Intelligence accelerometers vibration collection board with embedded Microcontroller.
#* Firmware Files (buildable with PlatformIO) at NohPei/geoscope-sensor
#* 1 AP1509 (or equivalent) Switching Power Supply #* 1 TI INA333 input amp #* 1 MCP6001T-E/OT filtering op-amp #* 1 TI REF2033AIDCCT Voltage Reference #* 1 TLV1117 (or equivalent) Linear Regulator #* 1 AD5270BRMZ Digital POT for programmable gain #* 2 Molex SL-compatible 2-pin header connectors (1 for Geophone connection, 1 for power connection) #* Optional: 1 Vertical-Launch BNC connector for wired data collection
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0 | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R7, R8 |
| 5 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C5, C11 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3 |
| 2 | 10nF | Capacitor_SMD:C_0402_1005Metric | C14, C15 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C12, C16 |
| 2 | 3.5nH | Inductor_SMD:L_0201_0603Metric | L2, L3 |
| 1 | 0.1F | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | C19 |
| 1 | 0.22uF | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 0.3pF | Capacitor_SMD:C_0201_0603Metric | C9 |
| 1 | 1.5pF | Capacitor_SMD:C_0201_0603Metric | C7 |
| 1 | 10 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 120 @ 100MHz | Inductor_SMD:L_0402_1005Metric | FB2 |
| 1 | 150uF | Capacitor_Tantalum_SMD:CP_EIA-3528-15_AVX-H_Pad1.50x2.35mm_HandSolder | C21 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C22 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 2.0pF | Capacitor_SMD:C_0201_0603Metric | C8 |
| 1 | 2.7nH | Inductor_SMD:L_0201_0603Metric | L1 |
| 1 | 220uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C18 |
| 1 | 32.768 kHz | earworm:Crystal_SMD_ECS_2012-2Pin_2.0x1.2mm | X1 |
| 1 | 32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | X2 |
| 1 | 330pF | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 4.7uH | Inductor_SMD:L_0603_1608Metric | L4 |
| 1 | 4pF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 500k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 75 @ 100MHz | Inductor_SMD:L_0402_1005Metric | FB1 |
| 1 | ADXL367BCCZ-RL7 | earworm:LGA-CC-12-4 | U2 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LPR6235-752SMRC | earworm:LPR6235 | T1 |
| 1 | LTC3108EDE-TRPBF | Package_DFN_QFN:DFN-12-1EP_3x4mm_P0.5mm_EP1.7x3.3mm | U3 |
| 1 | NetTie_2 | earworm:NetTie-2_SMD_Pad0.33mm | NT1 |
| 1 | nRF54L15-QFXX | Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm | U1 |
| 1 | ~ | Connector_Coaxial:SMA_Amphenol_132134-10_Vertical | J3 |

Architeuthis-Flux/Doombiq
An ultra low power, energy harvesting board that lets you "run" Doom

devinhorowitz/solar-business-card
Front — the card face Back — the component side


tag-designs/hardware
Hardware designs for tags and bases

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



AndreiVladescu/ESP32-Bit-Pirate-Hardware
Carrier breaker-board for the ESP32-S3 Devkit. Works great with the ESP32-Bit-Pirate firmware.
It measures 19.1 × 26.3 mm and has 4 copper layers, 1.56 mm thick.
49 parts, built around the ADXL367BCCZ-RL7 and LPR6235-752SMRC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jeff-shulkin/earworm_hardware repository on GitHub, at the commit this page was made from: the board is earworm_hardware.kicad_pcb and its schematic earworm_hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jeff-shulkin before reusing the design.