Skip to the content
2 layers18 × 9 mmCompassTag, the printed circuit board in 3D

Hardware designs for tags and bases

Size
18 × 9 mm
Copper layers
2
Thickness
0.4 mm
Parts
28
Nets
39
Pads
165
Tracks, vias
381, 35
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
27 Apr 2026
Updated
5 Nov 2026

Overview

CompassTag is an open-source printed circuit board by tag-designs, from the tag-designs/hardware repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 18 × 9 mm with 28 parts on 39 nets, routed with 381 tracks and 35 vias.

It is built around the STM32L432KCU6, AK09940A and AT25XE321D-UUN-T, with the RV-3028-C7, TPS7A2018PDQN and 04026D226MAT2A among its other parts. Its parts include 13 capacitors, 6 ICs, 6 connectors, 1 resistor and 1 diode. It belongs with the STM32 boards of this library.

Main components

8

README

README.md

Tag Designs: Hardware

Board and mechanical designs for the ultralight archival data loggers (tags) documented at https://tag-designs.github.io/.

PathHolds
BoardDesigns/KiCad schematics and layouts for the tags and base boards, with their KiBot fabrication configurations
Mechanical/OpenSCAD sources for cases, carriers and harness jigs
docs/The hardware documentation site, published at https://tag-designs.github.io/hardware/
STM32_open_pin_dataST's pin-data submodule, used by the design-rule helpers

Board designs reach the shared symbol and footprint libraries through ${KIPRJMOD}/../../, so a board is tied to its depth in the directory tree. Moving one between directories is more than a move.

Regenerating the figures

The documentation's board renders and schematic PDFs are generated from the KiCad files and committed, because the workflow that publishes the site has no KiCad in it. After editing a board:

sh
cmake -S BoardDesigns -B build-boards
cmake --build build-boards --target board-docs

BoardDesigns/REGENERATING.md covers the targets, the three checks that guard the figures, what each of their messages means, and why generation is not done in CI. Read it before chasing a render that looks wrong — in particular, kicad-cli reports nothing at all when it cannot find a 3D model.

License

Copyright © 2018–2026 The Trustees of Indiana University.

This source describes Open Hardware and is licensed under the CERN Open Hardware Licence Version 2 — Permissive (CERN-OHL-P-2.0). You may redistribute and modify this source and make products using it under the terms of that licence, whose full text is in LICENSE and at https://ohwr.org/cern_ohl_p_v2.txt.

This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the licence for applicable conditions.

The STM32_open_pin_data submodule is ST's and carries its own license. The software that runs on these boards lives in a separate repository under the MIT License; see the project licensing summary.

Parts

28
QtyValueFootprintReferences
80.1ufCapacitor_SMD:C_0201_0603MetricC1, C2, C3, C5, C9, C501, C502, C503
4Conn_01x01AccelTag:taghole1.1mmJ301, J302, J303, J304
21ufCapacitor_SMD:C_0201_0603MetricC7, C8
222ufCapacitor_SMD:C_0402_1005MetricC4, C404
110kResistor_SMD:R_0201_0603MetricR1
147ufCapacitor_SMD:C_0603_1608MetricC6
1AK09940Atag_fp:AK09940aU2
1CONN_01X02AccelTag:MS621J401
1CONN_02X04AccelTag:tagpoints6J201
1DDiode_SMD:D_0402_1005MetricD401
1LIS2DU12TRtag_fp:LGA-12L_LIS2DU12_STMU3
1Q_NPN_BECPackage_TO_SOT_SMD:SOT-883Q501
1RV-3028-C7tag_fp:RV-8803-C7U501
1TPS7A2018PDQNPackage_SON:Texas_X2SON-4_1x1mm_P0.65mmU4
1at25ex321D-UUNAccelTag:adesto_wlcsp12U1
1stm32l431kcPackage_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mmU302

More from tag-designs/hardware

12
  • 4 layers53.3 × 73.7 mmTag breakout l432-1v8-v1, the printed circuit board in 3D

    Tag breakout l432-1v8-v1

    tag-designs/hardware

    Hardware designs for tags and bases

    54 parts2CERN-OHL-P-2.0
  • 4 layers53.3 × 73.7 mmTag breakout u375-smps v1, the printed circuit board in 3D

    Tag breakout u375-smps v1

    tag-designs/hardware

    Hardware designs for tags and bases

    51 parts2CERN-OHL-P-2.0
  • 4 layers50.8 × 69.9 mmTagbase lipo v1, the printed circuit board in 3D

    Tagbase lipo v1

    tag-designs/hardware

    Hardware designs for tags and bases

    50 parts2CERN-OHL-P-2.0
  • 2 layers53.3 × 73.7 mmTag breakout v2, the printed circuit board in 3D

    Tag breakout v2

    tag-designs/hardware

    Hardware designs for tags and bases

    45 parts2CERN-OHL-P-2.0
  • 2 layers53.3 × 73.7 mmTag breakout l432v2, the printed circuit board in 3D

    Tag breakout l432v2

    tag-designs/hardware

    Hardware designs for tags and bases

    43 parts2CERN-OHL-P-2.0
  • 2 layers50.8 × 69.9 mmTagbase jlcpcb v3, the printed circuit board in 3D

    Tagbase jlcpcb v3

    tag-designs/hardware

    Hardware designs for tags and bases

    40 parts2CERN-OHL-P-2.0
  • 2 layers50.8 × 69.9 mmTagbase jlcpcb v7, the printed circuit board in 3D

    Tagbase jlcpcb v7

    tag-designs/hardware

    Hardware designs for tags and bases

    40 parts2CERN-OHL-P-2.0
  • 4 layers21.5 × 11.5 mmImutag nand, the printed circuit board in 3D

    Imutag nand

    tag-designs/hardware

    Hardware designs for tags and bases

    37 parts2CERN-OHL-P-2.0
  • 4 layers21.5 × 11.5 mmImutag nand bmp581, the printed circuit board in 3D

    Imutag nand bmp581

    tag-designs/hardware

    Hardware designs for tags and bases

    36 parts2CERN-OHL-P-2.0
  • 2 layers50.8 × 36.9 mmImutag daughtercard, the printed circuit board in 3D

    Imutag daughtercard

    tag-designs/hardware

    Hardware designs for tags and bases

    34 parts2CERN-OHL-P-2.0
  • 2 layers50 × 35 mmTagMagAccelPresBreakout, the printed circuit board in 3D

    TagMagAccelPresBreakout

    tag-designs/hardware

    Hardware designs for tags and bases

    34 parts2CERN-OHL-P-2.0

Similar boards

  • 2 layers56 × 6.2 mmRing pcb, the printed circuit board in 3D

    Ring pcb

    dezash123/ring-pcb

    60 parts2
  • 2 layers120.5 × 46 mmKampela E1, the printed circuit board in 3D

    Kampela E1

    Alzymologist/Kampela

    Hardware signer and key storage for Substrate ecosystem

    192 parts21GPL-3.0
  • 2 layers78.5 × 46 mmKampela G5, the printed circuit board in 3D

    Kampela G5

    Kalapaja/kampela-hardware

    Hardware design schematics and supplementary files for Kampela hardware signer

    198 parts5GPL-3.0
  • 4 layers13 × 50 mmPhone Charm 1.0, the printed circuit board in 3D

    Phone Charm 1.0

    Hhhh-Pain/Phone-Charm

    First PCB Creation

    41 partsMIT
  • 4 layers10 × 12 mmHypaLoc, the printed circuit board in 3D

    HypaLoc

    crteensy/HypaLoc

    A tiny GNSS/magnetometer combo

    24 parts3MIT
  • 4 layers230 × 42 mmHomelabio, the printed circuit board in 3D

    Homelabio

    nrwiersma/homelabio

    Rack mountable CM4 carrier board

    104 parts2
  • 4 layers40 × 40 mmSTMF405 Flight Controller, the printed circuit board in 3D

    STMF405 Flight Controller

    MatthiasGeorgImhof/STMF405_Flight_Controller

    A flight controller inspired by Speedybee F405 v3 but with CAN and flash memory instead of flash card.

    214 parts1
  • 4 layers40 × 40 mmSTMF765 Flight Controller, the printed circuit board in 3D

    STMF765 Flight Controller

    MatthiasGeorgImhof/STMF765_Flight_Controller

    A flight controller inspired by Speedybee F405 v3 but with CAN using F7 MCU. Use flash memory instead of flash card.

    235 parts1

Questions

How big is the CompassTag PCB?

It measures 18 × 9 mm and has 2 copper layers, 0.4 mm thick.

What parts does the CompassTag use?

28 parts, built around the STM32L432KCU6, AK09940A, AT25XE321D-UUN-T and RV-3028-C7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CompassTag KiCad files?

From the tag-designs/hardware repository on GitHub, at the commit this page was made from: the board is BoardDesigns/Tags/CompassTag/CompassTag.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the CompassTag design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).