
Oscillator Board
techdude/takahashi-sky-patrol-ii-repair
Repair and troubleshooting files for the Takahashi Sky Patrol II Power Board and Remote

First PCB Creation
Phone Charm 1.0 is an open-source printed circuit board by Hhhh-Pain, from the Hhhh-Pain/Phone-Charm repository on GitHub, published under the MIT licence. It is a 4-layer board of 13 × 50 mm with 41 parts on 67 nets, routed with 224 tracks and 83 vias.
It is built around the ESP32-S3, AT25XE321D-UUN-T and 19-C47/RSGHBHC-5V01/2T, with the TLV77333PDQNR3 and USBLC6-2SC6 among its other parts. Its parts include 21 capacitors, 9 ICs, 6 resistors, 2 inductors and 1 connector. It belongs with the ESP32 boards of this library.
First PCB Creation
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0201_0603Metric | C9, C10, C14, C16, C17, C20 |
| 5 | 0.1 uF | Capacitor_SMD:C_0201_0603Metric | C2, C3, C4, C5, C6 |
| 5 | 19-C47/RSGHBHC-5V01/2T | 19-C47:19-C47&slash_RSGHBHC-5V01&slash_2T_EVE | U2, U3, U4, U5, U6 |
| 4 | 1uF | Capacitor_SMD:C_0201_0603Metric | C11, C15, C22, C23 |
| 3 | 10uF | Capacitor_SMD:C_0201_0603Metric | C12, C13, C21 |
| 2 | 10 pF | Capacitor_SMD:C_0201_0603Metric | C7, C8 |
| 2 | 5k | Resistor_SMD:R_0201_0603Metric | R1, R2 |
| 2 | Short Pad | Resistor_SMD:R_0201_0603Metric | R6, R7 |
| 1 | 10k | Resistor_SMD:R_0201_0603Metric | R5 |
| 1 | 11u | Capacitor_SMD:C_0201_0603Metric | C18 |
| 1 | 2.0 nH (500mA) | Inductor_SMD:L_0201_0603Metric | L1 |
| 1 | 24 nH | Inductor_SMD:L_0201_0603Metric | L2 |
| 1 | 40MHz (±10ppm) | XTAL_FW400WFMR1 (Clock):XTAL_FW400WFMR1 | Y1 |
| 1 | 4m | Resistor_SMD:R_0201_0603Metric | R4 |
| 1 | AT25XE321D-UUN-T | AT25XE321D-UUN-T:AT25XE321D-UUN-T | U10 |
| 1 | ESP32-S3 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm_1 | U1 |
| 1 | MountingHole | MountingHole:MountingHole_2.5mm_Pad_Via | H1 |
| 1 | TLV77333PDQNR | TLV77333PDQNR (DC DC Converter):SUP_TPS3831L30DQNR | U9 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-666 | U7 |
| 1 | USB_A | Connector_USB:usb-a-PCB | J1 |

techdude/takahashi-sky-patrol-ii-repair
Repair and troubleshooting files for the Takahashi Sky Patrol II Power Board and Remote


Alzymologist/Kampela
Hardware signer and key storage for Substrate ecosystem

Kalapaja/kampela-hardware
Hardware design schematics and supplementary files for Kampela hardware signer




It measures 13 × 50 mm and has 4 copper layers, 1.59 mm thick.
41 parts, built around the ESP32-S3, AT25XE321D-UUN-T, 19-C47/RSGHBHC-5V01/2T and TLV77333PDQNR3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Hhhh-Pain/Phone-Charm repository on GitHub, at the commit this page was made from: the board is Phone Charm 1.0.kicad_pcb and its schematic Phone Charm 1.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).