

PicoSax
Updates are occasionally posted on Instagram
- Size
- 100 × 160 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 65
- Pads
- 545
- Tracks, vias
- 487, 38
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Feb 2022
- Updated
- 12 Aug 2026
Overview
PicoSax is an open-source printed circuit board by zygurt, from the zygurt/MIDI-Wind-Controller repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 160 mm with 89 parts on 65 nets, routed with 487 tracks and 38 vias.
It is built around the 19-C47/RSGHBHC-5V01/2T. Its parts include 22 resistors, 18 capacitors, 15 diodes, 15 switches and 4 connectors. It belongs with the RP2040 boards of this library.
Main components
1README
README.mdMIDI-Wind-Controller
A brief overview of the repo
- 3D designs contains dxf and svg files. Basic design was done in Fusion 360 and then exported.
- Datasheets contains datasheets. Woah.
- src contains source code for doppler and Arduino Leonardo implementations, as well as the board schematic. Currently midi messages are sent over USB, and shows the midi note number in binary on the LED grid on the doppler board.
Known issues
- Pressing the low C key (D9) causes the doppler to crash. Reducing the length of the readButtons() switch case to 7 statements stops the crashing. The error isn't present on the Arduino Leonardo.
- The octave keys give incorrect values for C#. Top 2 octaves are swapped. Again, this error does not occur for the Arduino Leonardo.
Updates are occasionally posted on Instagram
Current prototype status:

Legacy information
Videos about the initial prototype can be found on Youtube
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R10, R11, R12, R13, R14, R15, R18, R19 +1 |
| 15 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18 |
| 15 | Gateron_KS-33 | PicoSax:KS-33 | SW8va1, SW8vb1, SWA1, SWB1, SWBb1, SWC1, SWCtrl1, SWD1, SWDup1, SWE1, SWEb1, SWF1, SWG1, SWGs1, SWSpr1 |
| 14 | 19-C47/RSGHBHC-5V01/2T | PicoSax:19-C47_RSGHBHC-5V01-2T | D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15 |
| 8 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | M1, M2, M3, M4, M5, M5, M6, M6 |
| 3 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20, R21, R22 |
| 2 | MountingHole_5.5mm | MountingHole:MountingHole_5.5mm | M8, M8 |
| 2 | ~ | MyLibrary:PiPico Header | J1, J4 |
| 1 | 0.01uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10R 0.25W | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 1 | 1N5817 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 33R 0.5W | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R16 |
| 1 | 470pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | MountingHole_3mm | MountingHole:MountingHole_3mm | M7 |
| 1 | Perfboard | MyLibrary:Perfboard 10x20 | U1 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | ~ | MyLibrary:BPS110 AD0P15 | U2 |
| 1 | ~ | MyLibrary:MP3V5004GP | U3 |
| 1 | ~ | PicoSax:MIDI_DIN5 | J2 |
More from zygurt/MIDI-Wind-Controller
4- 2 layers100 × 160 mm

- 2 layers100 × 160 mm

PicoSax v2 NoLEDS
zygurt/MIDI-Wind-Controller
Updates are occasionally posted on Instagram
38 parts1MIT - 2 layers

- 2 layers35.7 × 59.5 mm

Similar boards
- 10 layers130 × 90 mm

- 8 layers126 × 117 mm

- 4 layers13 × 50 mm

- 2 layers63.3 × 15 mm

Ss front panel
loopj/short-stack
World's Smallest Nintendo Wii, using a trimmed motherboard and custom stacked PCBs
13 parts804 - 2 layers66 × 93.5 mm

Christmas tree
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
65 parts17BSD-3-Clause - 2 layers143.5 × 115.5 mm

SofleKeyboard
josefadamcik/SofleKeyboard
A split keyboard based on Lily58, Crkbd and Helix keyboards
89 parts2.6k - 2 layers61 × 74 mm

- 2 layers59.4 × 138.3 mm

Questions
How big is the PicoSax PCB?
It measures 100 × 160 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PicoSax use?
89 parts, built around the 19-C47/RSGHBHC-5V01/2T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PicoSax KiCad files?
From the zygurt/MIDI-Wind-Controller repository on GitHub, at the commit this page was made from: the board is pcb/PicoSax/PicoSax.kicad_pcb and its schematic pcb/PicoLEDs/PicoLEDs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PicoSax design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).