Skip to the content
2 layers33 × 48.3 mmYet another esp12e breakout, the printed circuit board in 3D

Yet another esp12e breakout

tadas-s/yet-another-esp12e-breakout

Yet another ESP12E/F breakout mini-board for breadboarding projects

Size
33 × 48.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
17
Pads
70
Tracks, vias
111, 22
Pours
5
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
24 Feb 2019
Updated
24 Feb 2019

Overview

Yet another esp12e breakout is an open-source printed circuit board by tadas-s, from the tadas-s/yet-another-esp12e-breakout repository on GitHub. It is a 2-layer board of 33 × 48.3 mm with 14 parts on 17 nets, routed with 111 tracks and 22 vias.

It is built around the ESP-12E and AMS1117-3.3. Its parts include 4 resistors, 4 connectors, 3 capacitors, 2 ICs and 1 switch. It belongs with the interfaces and adapters boards and the ESP8266 boards of this library.

Main components

2

Parts

14
QtyValueFootprintReferences
410KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R2, R3, R4
2100nFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1, C2
2Conn_01x09Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ3, J4
1220uFCapacitor_SMD:CP_Elec_6.3x5.8C3
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1Debug serial outConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1ESP-12ERF_Module:ESP-12EU1
1Programmer connConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ1
1ResetButton_Switch_SMD:SW_SPST_B3S-1000SW1

Similar boards

  • 2 layers101.6 × 147.3 mmKarabas pro revER, the printed circuit board in 3D

    Karabas pro revER

    andykarpov/karabas-pro

    FPGA based retrocomputer with FDD and HDD controllers

    223 parts37MIT
  • 2 layers68.5 × 53.3 mmIot wifi uno hw, the printed circuit board in 3D

    Iot wifi uno hw

    iotmakervn/iot-wifi-uno-hw

    Open hardware ESP8266 Uno board - Internet Of Things WiFi Uno

    56 parts26
  • 2 layers26.4 × 17.3 mmKnock homekit v1, the printed circuit board in 3D

    Knock homekit v1

    andrewngai/HomekitKnock

    This repo is the resources for the project on https://youtu.be/X5OxuFtGn0

    12 parts17
  • 2 layersSmol boy V1, the printed circuit board in 3D

    Smol boy V1

    BogdanTheGeek/ESP_RC

    An Open-Source Transmitter/Receiver for RC Planes, Cars, Boats and more based on ESP-NOW

    21 parts16BSD-2-Clause
  • 2 layers51 × 43 mmEgg timer, the printed circuit board in 3D

    Egg timer

    MakersFunDuck/Common-Kitchen-Timer-With-LCD-Replacement-Board

    A replacement PCB board for common 4 digit 7 segment LCD kitchen timers.

    25 parts13GPL-3.0
  • 4 layers29.9 × 32 mmModels heart rev1.1, the printed circuit board in 3D

    Models heart rev1.1

    KushlaVR/models-heart

    Можливості: Керування через WIFI з телефона або ПК 5 незалежних каналів (світлодіоди/сервомотори) 1 Н-міст для підключення мотора (піковий струм до 3А) Вмонтована BMS 1S та контроллер заряду Li-Ion акумулятора з…

    106 parts7GPL-3.0
  • 2 layers16.3 × 110.2 mmESP12E Smart Coaster, the printed circuit board in 3D

    ESP12E Smart Coaster

    atom-robotics-lab/ThermoGlow-Coaster

    This project is an ESP12E based Temperature Controlled Smart Coaster. The project uses the following: ESP12E Module 12 x WS2812B SMD LEDs MLX90614 Temperature Sensor I2C Module Power Bank Charge-Boost Module for…

    50 parts5
  • 2 layers56.3 × 32 mmESP12-E breakout board, the printed circuit board in 3D

    ESP12-E breakout board

    cyberstormdotmu/ESP12E-breakout

    A simple and open source ESP12E/ ESP8266 breakout board. You will need an external programmer to program the module but most of the components required to run the module are present. Made with KiCad.

    18 parts3

Questions

How big is the Yet another esp12e breakout PCB?

It measures 33 × 48.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Yet another esp12e breakout use?

14 parts, built around the ESP-12E and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Yet another esp12e breakout KiCad files?

From the tadas-s/yet-another-esp12e-breakout repository on GitHub, at the commit this page was made from: the board is yet-another-esp12e-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Yet another esp12e breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask tadas-s before reusing the design.