

ESP12E Smart Coaster
This project is an ESP12E based Temperature Controlled Smart Coaster. The project uses the following: ESP12E Module 12 x WS2812B SMD LEDs MLX90614 Temperature Sensor I2C Module Power Bank Charge-Boost Module for…
- Size
- 16.3 × 110.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 43
- Pads
- 156
- Tracks, vias
- 217, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 May 2022
- Updated
- 24 Oct 2023
Overview
ESP12E Smart Coaster is an open-source printed circuit board by atom-robotics-lab, from the atom-robotics-lab/ThermoGlow-Coaster repository on GitHub. It is a 2-layer board of 16.3 × 110.2 mm with 50 parts on 43 nets, routed with 217 tracks and 16 vias.
It is built around the ESP-12E, AMS1117-3.3 and WS2812B, with the SI2302 among its other parts. Its parts include 15 capacitors, 12 diodes, 6 resistors, 4 connectors and 3 ICs. It belongs with the ESP8266 boards of this library.
Main components
4ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedSI2302
SOT-23-55℃~+150℃ 1 N-channel 120pF 1V 1W 20V 300pF 3A 4nC@4.5V 65mΩ@2.5V 80pF N-Channel SOT-23 MOSFETs ROHSYONGYUTAIMOSFETs
README
README.mdTemperature Controlled LED Coaster
This project is an ESP12E based Temperature Controlled Smart Coaster. The project uses the following:
- ESP12E Module
- 12 x WS2812B SMD LEDs
- MLX90614 Temperature Sensor I2C Module
- Power Bank Charge-Boost Module for charging & boosting 3.7V of Li-Ion cell to 5V.
- PCB Design was made using KICAD.
This Project was made in Partnership with hnhcart.com as sponsers and mentors.
Schematic
PCB Design

Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 12 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 5 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R4, R5, R6 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15 |
| 1 | 3.3V | TestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | TP3 |
| 1 | 5V | TestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | TP1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Battery | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | ESP-12E | RF_Module:ESP-12E | U3 |
| 1 | GND | TestPoint:TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | TP2 |
| 1 | MLX90614 Temp Sensor | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | Power_Input_Header | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | Programming_header | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | SI2302 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SPI_Header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | SW_SPDT | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW1 |
| 1 | SolderJumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | T6845C_Module | Power_Bank_Module:T6845C_Module | U1 |
Similar boards
- 2 layers320.5 × 91 mm

- 2 layers67 × 96 mm

- 2 layers76.2 × 76.2 mm

4x4 platform
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.
71 parts100BSD-3-Clause - 2 layers141 × 88.1 mm

- 4 layers130 × 90 mm

- 2 layers35.6 × 16.8 mm

- 2 layers26.2 × 12.3 mm

- 2 layers34.4 × 10.1 mm

KiCAD PCB Design For Embedded Systems and Electronics Projects-2020
v76s/KiCAD-PCB-Design-For-Embedded-Systems-and-Electronics-Projects-2020
14 parts
Questions
How big is the ESP12E Smart Coaster PCB?
It measures 16.3 × 110.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP12E Smart Coaster use?
50 parts, built around the ESP-12E, AMS1117-3.3, WS2812B and SI2302. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP12E Smart Coaster KiCad files?
From the atom-robotics-lab/ThermoGlow-Coaster repository on GitHub, at the commit this page was made from: the board is ESP12E_Smart_Coaster.kicad_pcb and its schematic ESP12E_Smart_Coaster.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP12E Smart Coaster design in my own project?
Its repository states no licence, so its author keeps all rights: ask atom-robotics-lab before reusing the design.