2 layers148.2 × 34.5 mm
Renewable charger
Tactile-electronics/windmill-electronics
I can't work out how to do the two circuits on one board with the connections that you can add and remove. So I've made two separate boards.
45 parts1CC0-1.0
2 layers
Parallel windmill pcb
Tactile-electronics/windmill-electronics1I can't work out how to do the two circuits on one board with the connections that you can add and remove. So I've made two separate boards.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 5
- Pads
- 18
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Jul 2021
- Updated
- 2 May 2022
Overview
Parallel windmill pcb is an open-source printed circuit board by Tactile-electronics, from the Tactile-electronics/windmill-electronics repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board with 6 parts on 5 nets.
Its parts include 2 capacitors and 2 diodes.
README
README.mdI can't work out how to do the two circuits on one board with the connections that you can add and remove. So I've made two separate boards.
I wanted you to have alook before I wire it up on Kicad as at the moment I'm not sure if I've got it right and some connections seem wrong
e.g the connections out of the board that is in series have been connected together on the pcb - by KICAD - do I need to change it in the schematic or can I do that in the wiring?
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Capacitor | Capacitors_THT:CP_Radial_D8.0mm_P5.00mm | C1, C2 |
| 1 | Bridge Rectifier | Diodes_THT:Diode_Bridge_DIP-4_W7.62mm_P5.08mm | D2 |
| 1 | Bridge Rectifier | Diodes_THT:Diode_Bridge_DIP-4_W7.62mm_P5.08mm | D1 |
| 1 | Conn_01x02_Male | Connectors_WAGO:WAGO_734_2pin_Straight_RuggedPads | Powerout1 |
| 1 | Stepper_Motor_bipolar | Connectors_TE-Connectivity:TE_MATE-N-LOK_350211-1_1x04_P5.08mm_Vertical | M1 |
Questions
What parts does the Parallel windmill pcb use?
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Parallel windmill pcb KiCad files?
From the Tactile-electronics/windmill-electronics repository on GitHub, at the commit this page was made from: the board is Parallel Circuit/_Parallel_windmill pcb.kicad_pcb and its schematic renewable-charger/renewable-charger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Parallel windmill pcb design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Tactile-electronics/windmill-electronics
3- 2 layers69.9 × 74.9 mm
Combined wind generator v5
Tactile-electronics/windmill-electronics
I can't work out how to do the two circuits on one board with the connections that you can add and remove. So I've made two separate boards.
15 parts1CC0-1.0 - 2 layers
Windmill motor series
Tactile-electronics/windmill-electronics
I can't work out how to do the two circuits on one board with the connections that you can add and remove. So I've made two separate boards.
11 parts1CC0-1.0
Similar boards
- 2 layers18.5 × 11.1 mm
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
6 parts4.3kMIT - 2 layers14.6 × 33 mm
- 2 layers9 × 9 mm
Dpoint
Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements
6 parts1.1kMIT - 2 layers51.5 × 16.6 mm
MicroswitchXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
6 parts1.1kGPL-3.0 - 2 layers21.9 × 76.7 mm
Amiga External
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
6 parts1kGPL-3.0 - 2 layers88.9 × 50.8 mm
Businesscard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
6 parts915 - 2 layers20.3 × 15.2 mm
L0 RGB led
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
6 parts546MIT - 2 layers9 × 3.6 mm
