
V2.2 Mechanical Seven Segment Controller
OverInvented/Flippy
The code needed to build a mechanical 7-segment display that uses electromagnets to display characters

STM32F103C8T6 is an open-source printed circuit board by t-shoode, from the t-shoode/STM32F103C8T6 repository on GitHub. It is a 4-layer board of 37.1 × 32 mm with 25 parts on 51 nets, routed with 349 tracks and 39 vias.
It is built around the LD1117V33. Its parts include 12 capacitors, 4 resistors, 4 connectors, 2 ICs and 1 diode. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C6, C8, C10, C11, C12 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4 |
| 2 | 2u2 | Capacitor_SMD:C_0504_1310Metric | C5, C7 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | Crystal | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | LD1117V33 | Package_TO_SOT_SMD:SOT-223 | U2 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Wuerth_65100516121_Horizontal | J5 |

OverInvented/Flippy
The code needed to build a mechanical 7-segment display that uses electromagnets to display characters


sebastianbeyer/KOSMO_braids
This is a KOSMO (Look Mum No Computer) version of the Mutable instruments braids, based on the through-hole version done by sound-force.nl.



maximevince/PicoZorro
Amiga Zorro-II Bus Cards using nothing but an RPi Pico to interact with the bus

umasme/2025-2026
University of Miami ASME Official Repository for NASA Lunabotics Challenge

drovoh4k/dang
Debido a esta problemática surge DANG, un sistema de control de aforo en las clases de mi universidad. Este sistema permite saber cuánta gente hay dentro de una clase concreta y mantener una trazabilidad de las aulas en…
It measures 37.1 × 32 mm and has 4 copper layers, 1.6 mm thick.
25 parts, built around the LD1117V33. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the t-shoode/STM32F103C8T6 repository on GitHub, at the commit this page was made from: the board is STM32F103C8T6.kicad_pcb and its schematic STM32F103C8T6.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask t-shoode before reusing the design.