

LCD IRQ
Yet another 8bit Retro Computer
- Size
- 83.3 × 68.2 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 26
- Nets
- 140
- Pads
- 368
- Tracks, vias
- 282, 205
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 May 2024
- Updated
- 26 Jul 2024
Overview
LCD IRQ is an open-source printed circuit board by Synthron, from the Synthron/S65 repository on GitHub. It is a 4-layer board of 83.3 × 68.2 mm with 26 parts on 140 nets, routed with 282 tracks and 205 vias.
It is built around the 74HC138 and LL4148. Its parts include 8 diodes, 5 capacitors, 2 ICs, 1 resistor and 1 connector. It belongs with the retro computing and games and lEDs and displays boards of this library.
Main components
274HC138
SOP-160℃~+70℃ 24ns@5.0V,16pF 2V~6V 3/8 5.2mA 5.2mA 5uA 74HC Decoder Reverse function Single Supply SOP-16 Signal Switches, Multiplexers, Decoders ROHSGRSignal Switches, Multiplexers, DecodersLL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching Diodes
README
README.mdS65xx Computer System
Yet another 8bit Retro Computer
Completely bloated, overkill and fully hackable!
ToDo
- Finish Hardware
- Software
- WozMon
- Implement Serial IO
- Implement Input Buffer
- extended for block write
- Kernel Functions
- General SysCalls
- Hardware Drivers
- RAM-Kernel
- Basic
- EhBasic
- File System
- Operating System
- WozMon
- Hardware
- order PCBs
- order parts
- solder together
Hardware
- Modules
- Backplane Bus
- CPU
- ROM
- RAM
- Bank/IRQ
- LCD/IRQ
- SIO
- PIO
- User Ports
- IDE
- Simple-IDE
- CF
- SID
- Addr + RTC + Clock
- Prototyping Board
- LPT Interface
- MyCPU Graphics Unit Interface
Software Brainstorm
- EhBasic
- maybe Microsoft Basic? See Ben Eater
- both in different banks
- maybe Microsoft Basic? See Ben Eater
- WozMon Main Boot
- Serial Program Bootloader
- File System (FAT?)
- DOS-Like UI
boot routine:
- selftest
- RAM Check
- ROM Check + version
- Load Kernel functions to RAM
- Start Monitor
Memory Map
General:
| Start | End | Usage | Size |
|---|---|---|---|
| 0000 | 7FFF | RAM | 32.768 |
| 8000 | BEFF | RAM Banked | 16.128 |
| BF00 | BFFF | IO Space | 256 |
| C000 | FFFF | ROM Banked | 16.384 |
IO Space:
| Start | End | Usage | Size |
|---|---|---|---|
| BF00 | BF07 | Bank & IRQ | 8 |
| BF08 | BF0F | TPI IDE | 8 |
| BF10 | BF12 | LPT | 2 |
| BF13 | BF14 | --- (LPT2) | 2 |
| BF14 | BF16 | MyCPU VGA | 3 |
| BF17 | BF1B | --- | 5 |
| BF1C | BF1F | PIA LEDs | 4 |
| BF20 | BF2F | VIA 1 LCD IRQ | 16 |
| BF30 | BF3F | VIA 2 | 16 |
| BF40 | BF4F | VIA 3 | 16 |
| BF50 | BF53 | ACIA 1 | 4 |
| BF54 | BF57 | ACIA 2 | 4 |
| BF58 | BF5B | --- (ACIA 3) | 4 |
| BF5C | BF5F | --- (ACIA 4) | 4 |
| BF60 | BF7F | SID 8580 | 32 |
| BF80 | BF87 | Simple IDE | 8 |
| BF88 | BF8F | CF Card | 8 |
| BF90 | BF9F | RTC | 16 |
| BFA0 | BFFF | --- | 96 |
Interrupts
The TPI Chip for the memory banks also functions as a priority interrupt controller, providing 5 seperate interrupt lines.
IRQ_0 is further divided into 8 lines for communication modules, giving an overall of 14 available IRQ-Lines.
These are currently used as follows:
- IRQ -> TPI
- IRQ_0 -> VIA0
- IRQ_0.0 -> ACIA0
- IRQ_0.1 -> ACIA1
- IRQ_0.2 -> ACIA2
- IRQ_0.3 -> ACIA3
- IRQ_0.4 -> RTC
- IRQ_0.5 -> ---
- IRQ_0.6 -> ---
- IRQ_0.7 -> ---
- IRQ_1 -> VIA1
- IRQ_2 -> VIA2
- IRQ_3 -> ---
- IRQ_4 -> ---
- IRQ_0 -> VIA0
- NMI -> ---
Note that the NMI is connected to a push button on the bus board.
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | LL4148 | Diode_SMD:D_MiniMELF | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 4µ7 | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 1 | 10k | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | 10µ | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C5 |
| 1 | 3k3 | Resistor_THT:R_Array_SIP9 | RN1 |
| 1 | 4k7 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 4x40 LCD | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | DS2 |
| 1 | 74HC138 | Package_DIP:DIP-16_W7.62mm | U2 |
| 1 | Bus_PCI_6502 | Connector_PCBEdge:BUS_PCI | J1 |
| 1 | LOGO | Eigene:logo | G*** |
| 1 | Val** | Eigene:ladder_4 | Ref** |
| 1 | W65C22SxP | Package_DIP:DIP-40_W15.24mm | U1 |
| 1 | WC1602A | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | DS1 |
The 23 most common of 26 parts.
More from Synthron/S65
12- 2 layers83.3 × 68.2 mm

- 4 layers350 × 107.9 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

- 4 layers83.3 × 68.2 mm

Similar boards
- 2 layers275 × 200 mm

- 2 layers181 × 97 mm

OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers243.8 × 171.5 mm

- 2 layers380 × 148.5 mm

- 4 layers100 × 100 mm

- 2 layers99.1 × 99.1 mm

Av board
rjw57/buri
This repository contains my work on designing, building and programming a 6502 microcomputer from scratch. The 6502 was the CPU used in the original Apple 1, BBC Microcomputer, NES console and many other systems from…
42 parts68MIT - 2 layers216 × 150 mm

Motherboard-101
artemisamsx/artemisa
Schematics, PCB designs and HDL simulations to build a 8-bits MSX computer
124 parts67 - 2 layers144.8 × 88.9 mm

Questions
How big is the LCD IRQ PCB?
It measures 83.3 × 68.2 mm and has 4 copper layers, 1.61 mm thick.
What parts does the LCD IRQ use?
26 parts, built around the 74HC138 and LL4148. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LCD IRQ KiCad files?
From the Synthron/S65 repository on GitHub, at the commit this page was made from: the board is Hardware/modules/LCD_IRQ/LCD_IRQ.kicad_pcb and its schematic Hardware/modules/ACIA2/ACIA2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LCD IRQ design in my own project?
Its repository states no licence, so its author keeps all rights: ask Synthron before reusing the design.