

ThrottleReverseBrake
- Size
- 86.4 × 86.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 23
- Pads
- 65
- Tracks, vias
- 64, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 May 2019
- Updated
- 6 Sep 2026
Overview
ThrottleReverseBrake is an open-source printed circuit board by synthesissolutions, from the synthesissolutions/geeksforkids repository on GitHub. It is a 2-layer board of 86.4 × 86.4 mm with 23 parts on 23 nets, routed with 64 tracks and 0 vias.
It is built around the MCP4728-E/UN, PCF8591T/2 and IRLIZ44N. Its parts include 14 connectors, 2 ICs, 1 resistor, 1 diode and 1 transistor.
Main components
3MCP4728-E/UN
MSOP-10-40℃~+125℃ 12 2.7V~5.5V 2LSB 4 40nA 6us I2C Integrated buffer、Power-on reset、Power-down mode、Programmable gain Voltage Buffer MSOP-10 Digital to Analog Converters (DAC) ROHSMicrochip TechnologyDigital To Analog Converters (DAC)PCF8591T/2
SOIC-16-300mil-40℃~+85℃ 1.5LSB 11.1kHz 1uA 2.5V~6V 4 40dB 750kHz~1.25MHz 8 External External、Built-in I2C Multiplexers、Power-on reset SAR Yes SOIC-16-300mil Analog to Digital Converters (ADC) ROHSNXP SemiconductorsAnalog To Digital Converters (ADC)IRLIZ44N
TO-220-FP1 N-channel 1.7nF@25V 22mΩ@17A,10V 2V@250uA 30A 48nC@5V 55V TO-220-FP MOSFETsInfineon TechnologiesMOSFETs
README
README.mdgeeksforkids
car_firmware - Code for RC/Joytick controlled cars
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 12v Power | Project:TerminalBlock_bornier-2_P5.08mm | J12 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 1N4004 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | Brake In | Project:JST_XH_B3B-XH-A_1x03_P2.54mm_Vertical | J11 |
| 1 | Brake Out | Project:TerminalBlock_bornier-2_P5.08mm | J10 |
| 1 | IRLIZ44N | Package_TO_SOT_THT:TO-220F-3_Vertical | Q1 |
| 1 | MCP4728 | Project:Adafruit_MCP4728 | U1 |
| 1 | PCF8591 | Project:Adafruit_PCF8591 | U2 |
| 1 | Reverse In | Project:JST_XH_B3B-XH-A_1x03_P2.54mm_Vertical | J1 |
| 1 | Reverse Out A | Project:JST_XH_B2B-XH-A_1x02_P2.54mm_Vertical | J2 |
| 1 | Reverse Out B | Project:JST_XH_B2B-XH-A_1x02_P2.54mm_Vertical | J3 |
| 1 | Reverse Out C | Project:JST_XH_B2B-XH-A_1x02_P2.54mm_Vertical | J4 |
| 1 | Reverse Out D | Project:JST_XH_B2B-XH-A_1x02_P2.54mm_Vertical | J5 |
| 1 | Steering Out A | Project:JST_XH_B2B-XH-A_1x02_P2.54mm_Vertical | J14 |
| 1 | Steering Out B | Project:JST_XH_B2B-XH-A_1x02_P2.54mm_Vertical | J13 |
| 1 | Throttle Out A | Project:JST_XH_B2B-XH-A_1x02_P2.54mm_Vertical | J8 |
| 1 | Throttle Out B | Project:JST_XH_B2B-XH-A_1x02_P2.54mm_Vertical | J6 |
| 1 | Throttle Out C | Project:JST_XH_B2B-XH-A_1x02_P2.54mm_Vertical | J9 |
| 1 | Throttle Out D | Project:JST_XH_B2B-XH-A_1x02_P2.54mm_Vertical | J7 |
The 19 most common of 23 parts.
More from synthesissolutions/geeksforkids
12- 8 layers120 × 100 mm

- 4 layers50 × 100 mm

- 4 layers72.6 × 89.1 mm

- 2 layers132.6 × 110.1 mm

- 4 layers72.6 × 47.5 mm

- 4 layers72.6 × 89.1 mm

- 2 layers68.6 × 79.2 mm

- 2 layers72.6 × 89.1 mm

- 2 layers72.6 × 89.1 mm

- 4 layers27.9 × 43.2 mm

- 4 layers35 × 50 mm
/ControlPanelV3/ControlPanelV3.kicad_pcb.jpg?size=s&soon)
- 2 layers50 × 25.4 mm

Similar boards
- 2 layers110 × 31.5 mm

- 2 layers65 × 56.5 mm

- 2 layers154.2 × 103.9 mm

Green House Controller RPi Shield
janithcbk123/Automated-Greenhouse
Greenhouse Automation Project
85 parts1MIT - 2 layers76.5 × 42.8 mm

- 2 layers38.8 × 44.2 mm

- 2 layers85.1 × 37.7 mm

Magical toys integration pcbrev4
conradbuck/magical-toys-work
Designing Integration PCBs to connect breadboard components to simplify assembly of prototypes.
14 parts - 2 layers285 × 185 mm

- 2 layers69.9 × 30.5 mm

Questions
How big is the ThrottleReverseBrake PCB?
It measures 86.4 × 86.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ThrottleReverseBrake use?
23 parts, built around the MCP4728-E/UN, PCF8591T/2 and IRLIZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ThrottleReverseBrake KiCad files?
From the synthesissolutions/geeksforkids repository on GitHub, at the commit this page was made from: the board is hardware/!Archive/Pitt State/ThrottleReverseBrake/ThrottleReverseBrake.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ThrottleReverseBrake design in my own project?
Its repository states no licence, so its author keeps all rights: ask synthesissolutions before reusing the design.