
Main automatic manifold
Febriyandi12/Desain_PCB
Kolaborasi untuk update desain pcb yang telah di research

Greenhouse Automation Project
Green House Controller RPi Shield is an open-source printed circuit board by janithcbk123, from the janithcbk123/Automated-Greenhouse repository on GitHub, published under the MIT licence. It is a 2-layer board of 154.2 × 103.9 mm with 85 parts on 70 nets, routed with 458 tracks and 67 vias.
It is built around the PCF8591T/2, DHT11 and TEMT6000X01, with the AMS1117, M2.5 and BC547 among its other parts. Its parts include 22 connectors, 17 resistors, 10 diodes, 9 capacitors and 5 transistors.
The demand for a system capable of maximizing crops in an efficient and convenient way is higher than ever. The aim of this project is to make an automated greenhouse with IOT that is capable of monitoring, controlling, and automating conditions of crops remotely and recording data across long periods of time. The core of the product consists of a Raspberry Pi 3b+ microprocessor, a Firebase real-time database, and an Android app. The Raspberry Pi is connected with temperature, humidity, moisture, and light sensors, a lighting circuit, and relays that control fan, dripping, and sprinkling circuits. The Firebase real-time database acts as the connection between the Raspberry Pi and the Android app. The readings from sensors are uploaded to the firebase and then can be monitored from the app. The Android app has two main modes of operation, namely manual and automatic. In the manual mode, each of the relays can be switched on or off at any time by the user while in the automatic mode, the system manages the circuits according to a set of conditions entered by the user. Another feature of this product is saving the readings of sensors along with time so that they can be used for projections and analysis. The multiple modes of operation and advanced features were added to make sure that the product is accessible to novices and hobbyists while still being a valuable tool for professional-level farming.
This project would not have been possible without the support of many individuals. We would like to give our special appreciation to the project supervisor Mr. Nicoloy Gurusinghea for his guidance and support throughout the project time period. Our special thanks go to the laboratory staff who allowed us to use the equipment for the completion of our projects and indeed we are thankful for letting us borrow such an expensive Raspberry Pi from the Laboratory for the project use.
Software Used
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 150nF | Capacitor_SMD:C_0805_2012Metric | C2, C4, C6, C7, C8, C9 |
| 5 | 510 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R5, R7, R8, R9 |
| 4 | 1K | Resistor_SMD:R_0805_2012Metric | R10, R14, R15, R16 |
| 4 | Conn_01x03_Male | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J9, J11, J12, J13 |
| 4 | M2.2 | MountingHole:MountingHole_2.2mm_M2 | PCF1, PCF2, PCF3, PCF4 |
| 4 | M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MK1, MK2, MK3, MK4 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 4 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J5, J16, J17, J18 |
| 3 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R6 |
| 3 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D3, D5, D7 |
| 3 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3 |
| 3 | Conn_01x02_Male | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J19, J20, J21 |
| 3 | LED | LED_THT:LED_D3.0mm | D2, D4, D6 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D8, DAC1, PWR1 |
| 3 | SANYOU_SRD_Form_C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1, K2, K3 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R12, R13 |
| 2 | 330uF | Capacitor_SMD:CP_Elec_10x10 | C1, C3 |
| 2 | 820 | Resistor_SMD:R_0805_2012Metric | R1, R17 |
| 2 | TIP120 | Package_TO_SOT_THT:TO-220-3_Vertical | Q4, Q5 |
| 1 | +IN | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | J2 |
| 1 | +OUT | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | J6 |
| 1 | -IN | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | J3 |
| 1 | -OUT | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | J7 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 10K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 12V PWR_IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | 1K | Potentiometer_THT:Potentiometer_Bourns_3339P_Vertical | RV2 |
| 1 | 47uH | Inductor_SMD:L_Bourns_SRR1260 | L1 |
| 1 | A9050 | OptoDevice:R_LDR_5.0x4.1mm_P3mm_Vertical | R11 |
| 1 | AMS1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | B120-E3 | Diode_SMD:D_SMA | D1 |
| 1 | CSMS_V1.2 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J10 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Horizontal | J15 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.00mm:PinHeader_1x05_P2.00mm_Horizontal | J4 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | P1 |
| 1 | DHT11 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J14 |
| 1 | PCF8591 | eec:NXP_Semiconductors-SOT162-1-02_2016-0-IPC_A | U2 |
| 1 | TEMT6000 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J8 |
| 1 | Thermistor_NTC | Resistor_SMD:R_0805_2012Metric | TH1 |
| 1 | ~ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |

Febriyandi12/Desain_PCB
Kolaborasi untuk update desain pcb yang telah di research

crisfajardo/Bike-Light-Controller
A prototype to create a smart bike from a conventional one.

SoF4rAway/birdcage-automation-system
A birdcage automation system based on Arduino UNO R4 WiFi





conradbuck/magical-toys-work
Designing Integration PCBs to connect breadboard components to simplify assembly of prototypes.
It measures 154.2 × 103.9 mm and has 2 copper layers, 1.6 mm thick.
85 parts, built around the PCF8591T/2, DHT11, TEMT6000X01 and AMS1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the janithcbk123/Automated-Greenhouse repository on GitHub, at the commit this page was made from: the board is PCB/Green House Controller - v05/Green House Controller RPi Shield.kicad_pcb and its schematic PCB/Green House Controller - v05/5V-Relay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).