

Magic Wand Timer Simplified
- Size
- 66 × 48.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 13
- Pads
- 91
- Tracks, vias
- 53, 9
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 May 2019
- Updated
- 6 Sep 2026
Overview
Magic Wand Timer Simplified is an open-source printed circuit board by synthesissolutions, from the synthesissolutions/geeksforkids repository on GitHub. It is a 4-layer board of 66 × 48.3 mm with 25 parts on 13 nets, routed with 53 tracks and 9 vias.
It is built around the NE555P and IRF530N-VB. Its parts include 5 capacitors, 5 resistors, 3 diodes, 3 connectors and 1 IC.
Main components
2README
README.mdgeeksforkids
car_firmware - Code for RC/Joytick controlled cars
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 100K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2, R3, R4 |
| 3 | 10uF | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C1, C3, C5 |
| 3 | 2.54mm | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1, J2, J3 |
| 2 | 10nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C2, C4 |
| 1 | 1M | Potentiometer_THT:Potentiometer_Bourns_3386F_Vertical | RV1 |
| 1 | 560 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | 680R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R5 |
| 1 | D | Diode_THT:D_DO-201AD_P12.70mm_Horizontal | D3 |
| 1 | Fuse | Fuse:Fuseholder_Clip-5x20mm_Littelfuse_111_Lateral_P18.80x5.00mm_D1.17mm_Horizontal | F1 |
| 1 | GREEN | LED_THT:LED_D5.0mm_Clear | D1 |
| 1 | IRF530N | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q1 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | RED | LED_THT:LED_D5.0mm_Clear | D2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW2 |
More from synthesissolutions/geeksforkids
12- 8 layers120 × 100 mm

- 4 layers50 × 100 mm

- 4 layers72.6 × 89.1 mm

- 2 layers132.6 × 110.1 mm

- 4 layers72.6 × 47.5 mm

- 4 layers72.6 × 89.1 mm

- 2 layers68.6 × 79.2 mm

- 2 layers72.6 × 89.1 mm

- 2 layers72.6 × 89.1 mm

- 4 layers27.9 × 43.2 mm

- 4 layers35 × 50 mm
/ControlPanelV3/ControlPanelV3.kicad_pcb.jpg?size=s&soon)
- 2 layers50 × 25.4 mm

Similar boards
- 2 layers159.5 × 62.5 mm

H Bridge KiCAD
JoshWilbur/Electronic-Speed-Controller
Firmware for an STM32-based H-Bridge motor controller. This project won best demonstration, UMaine ECE Class of 2025
44 parts4 - 2 layers155 × 140 mm

Control board
Sergio5714/experimental-teg-testbed-firmware
Firmware for STM32 MCU of testbed data acquisition and control system
89 parts2 - 2 layers100 × 80 mm

Adapter panelized
ojousima/kon-41.3131
Aalto university student project for constant temperature controller
25 parts1GPL-3.0 - 2 layers558.8 × 88.9 mm

- 2 layers144 × 117.1 mm

- 2 layers275 × 185 mm

Dogrudan sdr D
kocer/direct-sampling-sdr
Direct-sampling SDR transceiver with four phase-coherent channels, and a class-A power amplifier for 1.8 to 54 MHz.
265 parts1 - 2 layers90.3 × 73.9 mm

Actionneurv0
Rami-Troudi/Electrique-Eurobot-IEEE-INSAT-2026
Repo for my electrical work for the Eurobot competition
40 parts1 - 2 layers195.6 × 139.1 mm

Isolated power
bec5-group/pid-controller
Part Number|Power|Input|Output|Packaging -----------|-----|-----|------|--------- AD8421BR|±2.5V ±18V (2mA)|(V-)+2.3V (V+)-1.8V|(V-)+1.2V (V+)-1.6V|8-MSOP / 8-SOIC LMH6505|±3.5V ±6V (2μA)|±7mA / ±0.6V|±2.4V ±3V|8-MSOP /…
269 parts
Questions
How big is the Magic Wand Timer Simplified PCB?
It measures 66 × 48.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Magic Wand Timer Simplified use?
25 parts, built around the NE555P and IRF530N-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Magic Wand Timer Simplified KiCad files?
From the synthesissolutions/geeksforkids repository on GitHub, at the commit this page was made from: the board is hardware/Action Challenges/Magic_Wand_Timer_Simplified/Magic_Wand_Timer_Simplified.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Magic Wand Timer Simplified design in my own project?
Its repository states no licence, so its author keeps all rights: ask synthesissolutions before reusing the design.