2 layers103.8 × 50 mm
Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558
2 layers95 × 106 mm
Esp32 board
SynKolbasyn/slon1the repository of the VSOSH Olympiad project
- Size
- 95 × 106 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 39
- Pads
- 167
- Tracks, vias
- 106, 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Sep 2023
- Updated
- 10 Apr 2024
Overview
Esp32 board is an open-source printed circuit board by SynKolbasyn, from the SynKolbasyn/slon repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 95 × 106 mm with 11 parts on 39 nets, routed with 106 tracks and 4 vias.
It is built around the ESP32-DEVKITC-VE. Its parts include 6 connectors, 2 resistors and 1 IC. It belongs with the ESP32 boards of this library.
Main components
1Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 2200 | slon_modules:r | R1, R2 |
| 2 | Conn_01x19_Pin | slon_modules:PinHeader_1x19_P2.54mm_Vertical | J4, J6 |
| 2 | Conn_01x19_Socket | slon_modules:PinHeader_1x19_P2.54mm_Vertical | J3, J5 |
| 2 | Screw_Terminal_01x19 | slon_modules:PinHeader_1x19_P2.54mm_Vertical | J1, J2 |
| 1 | ESP32-DevKitC | PCM_Espressif:ESP32-DevKitC | U1 |
| 1 | ~ | slon_modules:compass | compass1 |
| 1 | ~ | slon_modules:gps | gps1 |
Questions
How big is the Esp32 board PCB?
It measures 95 × 106 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32 board use?
11 parts, built around the ESP32-DEVKITC-VE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32 board KiCad files?
From the SynKolbasyn/slon repository on GitHub, at the commit this page was made from: the board is board/esp32_board/esp32_board.kicad_pcb and its schematic board/esp32_board/esp32_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32 board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers115 × 75 mm
SpinCoater
RParkerE/OpenSilicon
OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.
11 parts55GPL-3.0 - 2 layers127.3 × 54.1 mm
ESP32 SolarBox
cole8888/SRNE-Solar-Charge-Controller-Monitor
Read data from SRNE solar charge controllers.
34 parts42 - 2 layers62.2 × 57.1 mm
- 2 layers99.9 × 99.9 mm
- 2 layers
- 2 layers72.5 × 84.8 mm
Devboard
ste2425/PSP-Bluetooth-AVConnector
An AV-Out Breakout library for the PSP. Providing Kicad symbols and footprints to interface with the PSP 2/3K AVOut socket (also known as the TVOut socket)
13 parts12 - 2 layers100 × 88.9 mm
