
ReflowControllerV2
walclu/smartReflow
Repository for STM32WB55 based reflow toaster oven controller.

RC Jet Engine ECU
JF ECU32 is an open-source printed circuit board by JoachimF, from the JoachimF/JF-ECU32 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 27 parts on 70 nets.
It is built around the ESP32-DEVKITC-VE, MAX31855KASA+T and AMS1117-3.3, with the QM6006D-VB among its other parts. Its parts include 12 connectors, 6 resistors, 5 ICs and 4 transistors. It belongs with the ESP32 boards of this library.
RC Jet Engine ECU Details ici : https://www.usinages.com/threads/creation-dun-ecu-opensource-pour-micro-reacteur.160245/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | QM6006D | Package_TO_SOT_SMD:TO-252-2 | Q1, Q2, Q3, Q4 |
| 4 | R | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6 |
| 2 | 4050 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U2, U5 |
| 2 | R | Resistor_SMD:R_2512_6332Metric | R1, R2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | AUX | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | BATTERY 2S/3S | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J8 |
| 1 | ESP32-DevKitC | Espressif:ESP32-DevKitC | U1 |
| 1 | GAZ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | GLOW | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J5 |
| 1 | MAX31855KASA | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | PPM/PWM | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | RPM | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | S.PORT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | STARTER | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | STARTER | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J9 |
| 1 | VANNE KERO | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | VANNE KEROSTART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | k | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |

walclu/smartReflow
Repository for STM32WB55 based reflow toaster oven controller.


MAWoodMain/ESP-Reflow-Oven
A retro fit of a Lidl middle aisle mini oven into a home reflow oven

Omar-Magdy0/ReflowMate
To start small , grow big. current focus is mainly on providing : Digital Soldering iron support Hot air gun support 3d printable Accessories

hetii/preheater
The controller supports multiple heating zones, thermocouple monitoring, fan control, and a modern web-based interface for managing the entire process directly from a browser.



27 parts, built around the ESP32-DEVKITC-VE, MAX31855KASA+T, AMS1117-3.3 and QM6006D-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JoachimF/JF-ECU32 repository on GitHub, at the commit this page was made from: the board is Hardware/jf-ecu32/jf-ecu32.kicad_pcb and its schematic Hardware/jf-ecu32/jf-ecu32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).