Skip to the content
2 layers100 × 100 mmDrs pad, the printed circuit board in 3D

DRS (rip), Desktop Response System! Why reach for the mouse at all? I survived without one for years so you can too! An F1-themed macropad with 9 mechanical keys that displays live race standings on race days and WDC/WCC standings on non-race days.

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
24
Nets
24
Pads
107
Tracks, vias
101, 5
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
19 Jun 2026
Updated
27 Jun 2026

Overview

Drs pad is an open-source printed circuit board by Sylvia3366, from the Sylvia3366/drs-pad repository on GitHub. It is a 2-layer board of 100 × 100 mm with 24 parts on 24 nets, routed with 101 tracks and 5 vias.

It is built around the 1N4148W. Its parts include 9 diodes, 9 switches, 1 IC and 1 connector. It belongs with the keyboards and input and lEDs and displays boards and the ESP32 boards of this library.

Main components

1

README

README.md

DRS-Pad 🏎️💨

reallygreatsite com

ONSHAPE CAD

What is it?

The DRS-Pad, or Desktop Response System Pad, is a macropad powered by the XIAO-ESP32-S3 with 9 mechanical keys to save your fingers and hasten your workflow so you can be more efficient! Named after the now retired DRS (Drag Reduction System, RIP 2011–2025), the DRS-Pad is modeled after the iconic F1 Pirelli tire (specifically the soft one). Paired with a 1.14" IPS LCD display, it allows you to view race/qualifying results on race/qualification days and WDC/WCC standings on non-race days.

Why did I make it?

First and foremost, I've been wanting to make a macropad for the longest time now. I'm someone who's constantly on my computer—whether it be writing stories, programming/playing games, editing videos, or just doing homework, my fingers are constantly jumping around my keyboard. As a result, I often end the day with cramped fingers, so hopefully, this macropad will solve that :(

As for the theme: I've been an F1 fan for some time now, and I've grown a habit of checking my phone and social media for race updates. But I simply can't do that when I'm in the middle of working on CADing or programming. So I thought, what if I could combine both those problems into one solution?

How does it work?

So I made the DRS-Pad! Aside from being your usual, run-of-the-mill macropad for improving workflow and allowing your fingers to rest, there's a little screen that updates you on the latest F1 standings in real time! On a typical, non-race or quali day, the DRS-Pad will flicker between the WDC (driver's championship) and WCC (constructor's championship) every minute. During free practice, quali, and race days, the screen will update every minute with live feed on the current event, displaying the top 9 drivers. This is done through using an open source API (https://openf1.org).

Now, you can save your fingers AND enjoy some nice F1 updates all at the same time :)!

Designing the PCB 🏁

PCB designed on KiCAD!

Screenshot 2026-06-18 at 11 29 14 PM Screenshot 2026-06-19 at 9 13 22 PM Screenshot 2026-06-19 at 9 14 33 PM Screenshot 2026-06-19 at 9 14 27 PM

CADed and assembled on OnShape!

Screenshot 2026-06-19 at 9 16 24 PM Screenshot 2026-06-19 at 9 15 55 PM Screenshot 2026-06-19 at 9 16 43 PM Screenshot 2026-06-19 at 9 16 55 PM Screenshot 2026-06-19 at 9 17 05 PM Screenshot 2026-06-19 at 9 17 11 PM

Rendered on Fusion360!

Screenshot 2026-06-19 at 6 39 32 PM Screenshot 2026-06-19 at 8 05 35 PM

Bill of Materials 🧾

NameQtyUnitPrice (USD)Total (USD)MOQMOQ PriceSource
Seeed Studio XIAO ESP32 S31pcs9.469.4619.46Link
1.14 inch IPS LCD 135x2401pcs2.722.7212.72Link
1N4148 SOD-123 Diode9pcs0.040.331003.70Link
Cherry MX Switch9pcs0.776.95107.72Link
M2 4mm Screws4pcs0.030.12501.51Link
M2 14mm Screws4pcs0.040.14501.75Link
PCB1pcs0.800.8054.00Link
PLA 3D Printed Case1pcs----
Total30--20.52-30.86-

Build and Assembly 🔧

Required Tools

  1. Solder
  2. Soldering iron
  3. Tweezers
  4. Screwdriver for M2 screws
  5. Computer w. a USB port
  6. 3D printer

Assembly

  1. Attach the keycaps onto the switches.
  2. Solder the 1N4148 diodes onto the PCB.
  3. Solder the remaining parts onto the PCB.
  4. Place the assembled PCB into the bottom case.
  5. Secure on the mounting holes with M2 4mm screws.
  6. Secure the top case on the screw holes with M2 14mm screws (I used 12mm in the CAD, which works).
  7. Use Arduino IDE for the firmware.
  8. Connect the ESP32 to your computer via USB-C to upload code.
  9. Upload firmware.
  10. Make sure to change the WiFi so the network matches your own.
  11. Test the OLED display and keycaps.
  12. Test live updates.

Parts

24
QtyValueFootprintReferences
91N4148WDiode_SMD:D_SOD-123D1, D2, D3, D4, D5, D6, D7, D8, D9
9SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9
1Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1
1XIAO-ESP32-S3-SMDNew_XIAO_Series_Footprints:XIAO-ESP32-S3-DIPU1

The 20 most common of 24 parts.

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers208.8 × 396.9 mmFerris, the printed circuit board in 3D

    Ferris

    pierrechevalier83/ferris

    A low profile split keyboard designed to satisfy one single use case elegantly

    145 parts1.3k
  • 2 layers285.5 × 95 mmReviung46 ver1 1, the printed circuit board in 3D

    Reviung46 ver1 1

    gtips/reviung

    The REVIUNG41 is 41-key column staggered keyboard.

    119 parts517MIT
  • 4 layers95.6 × 73.6 mmMathpad, the printed circuit board in 3D

    Mathpad

    Summa-Cogni/Mathpad

    A mathematical keypad for students and professionals

    93 parts243
  • 2 layers141.5 × 83 mmRolio, the printed circuit board in 3D

    Rolio

    MickiusMousius/Rolio46Keyboard

    A split wireless keyboard based on the Corne and Sofle

    110 parts236MIT
  • 6 layers160 × 100 mmAdrmu6layer, the printed circuit board in 3D

    Adrmu6layer

    marcoreps/ADRmu

    ADR1000 10V standard

    240 parts149
  • 2 layers99.1 × 90.7 mmBgkeeb, the printed circuit board in 3D

    Bgkeeb

    sadekbaroudi/bgkeeb

    This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

    108 parts108
  • 2 layers229.8 × 102.6 mmBw2, the printed circuit board in 3D

    Bw2

    hazels-garage/bad-wings

    Bad Wings

    107 parts107CC-BY-SA-4.0

Questions

How big is the Drs pad PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Drs pad use?

24 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Drs pad KiCad files?

From the Sylvia3366/drs-pad repository on GitHub, at the commit this page was made from: the board is hardware/kicad/drspad.kicad_pcb and its schematic hardware/kicad/drspad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Drs pad design in my own project?

Its repository states no licence, so its author keeps all rights: ask Sylvia3366 before reusing the design.