

A small 8086 computer system.
- Size
- 160 × 111.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 240
- Pads
- 804
- Tracks, vias
- 3,210, 354
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Sep 2020
- Updated
- 14 Jul 2023
Overview
Vga is an open-source printed circuit board by svpetry, from the svpetry/Mini8086 repository on GitHub. It is a 4-layer board of 160 × 111.8 mm with 90 parts on 240 nets, routed with 3,210 tracks and 354 vias.
It is built around the EPM240T100C3, 74HC245D and 74AC245SC, with the 74AC573PC, 74ACT32PC and 74F166D among its other parts. Its parts include 34 capacitors, 23 ICs, 20 resistors, 5 diodes and 2 connectors. It belongs with the FPGA and CPLD boards of this library.
Main components
9EPM240T100C3
TQFP-100(14x14)0℃~+85℃ 192 2.5V、3.3V 240 240 4.7ns 80 In-system programming MAX II TQFP-100(14x14) Programmable Logic Device (CPLDs/FPGAs)Intel/AlteraProgrammable Logic Device (CPLDs/FPGAs)74HC245D
SO-20-300mil-40℃~+125℃ 1 160uA 2V~6V 7.8mA 7.8mA 74HC 8 9ns@4.5V,50pF Bidirectional Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74AC245SC
SOIC-20-300mil-40℃~+85℃ 1 24mA 24mA 2V~6V 3.5ns@5V,50pF 40uA 74AC 8 Bidirectional Output enable Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSonsemiBuffers, Drivers, Receivers, Transceivers74AC573PC
PDIP-20-40℃~+85℃ 1.5ns 24mA 24mA 2V~6V 3ns 4uA 5.5ns 74AC 8 D Latch Tri-State PDIP-20 Latches ROHSonsemiLatches74ACT32PC
DIP-14-40℃~+85℃ 2 24mA 24mA 2V 3.76V、4.76V 4 4.5V~5.5V 440mV 4uA 74ACT Series 800mV 9ns@5V,50pF OR Gate TTL Compatible CMOS DIP-14 Logic Gates ROHSonsemiLogic Gates74F166D
SOIC-16SOIC-16 Specialty Logic ROHSPhilips SemiconsSpecialty Logic74HC00D
SOP-14-40℃~+125℃ 1.5V、3.15V、4.2V 1.9V、3.7V、5.9V 100mV、400mV、400mV 2 2V~6V 4 40uA 5.2mA 5.2mA 500mV~1.8V 74HC Series 7ns@6V,50pF NAND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74LVC4245AD
SOIC-24-300mil-40℃~+125℃ 1 1.5V~3.6V 1.5V~5.5V 8 Bidirectional Level translator Power-off protection、Output enable high-impedance TTL TTL Tri-State SOIC-24-300mil Translators, Level Shifters ROHSNexperiaTranslators, Level ShiftersBAT43
DO-204AH-65℃~+125℃ 1 Independent 1V@0.2A 200mA 30V 4A 500nA@25V DO-204AH Schottky Diodes ROHSSTMicroelectronicsSchottky Diodes
README
README.mdMini8086
A small, extensible Intel 8086 based computer system.
PCBs
Some boards are made with Eagle but then I switched to KiCad because my Eagle License covers only 2 layer boards and I don't like their new licensing model (it's too expensive for hobbyists). Schematics and layout are contained in the folders Eagle and KiCad.
Backplane (Eagle)
First revision of the system backplane with 6 slots and a power connector.
Backplane (KiCad)
Second revision of the backplane. Has 7 slots and two power connectors (one of them USB-C).
RAM board (Eagle)
RAM board with 512 KB SRAM.
Info board (KiCad)
A 16x2 HD44780 based LCD can be mounted to this board. Also contains some LEDs for important signals.
LED board (KiCad)
Information board with LEDs for the busses and all important signals.
CPU board Rev 1 (KiCad, "main")
First revision of the CPU board, contains socket for an Intel 8086 CPU, ROM and other important system chips:
- Intel 8259 interrupt controller
- Intel 8254 timer
CPU board Rev 2 (KiCad, "mainv2")
Second revision of the CPU board where I replaced most of the logic chips with an Altera CPLD. Also contains 1 MB SRAM so the external RAM board is not needed.
VGA board (KiCad)
Simple graphics card with 128 KB SRAM and VGA output. Supported modes:
- text mode 80x25 characters, 256 colors (resolution 640x400 pixels)
- 320x200, 256 colors
- 320x400, 256 colors
- 640x200, 256 colors
I/O board (KiCad)
- Slots for SD and MicroSD cards. Simple SPI controller implemented in an Altera CPLD.
- PS/2 keyboard connector
- RS232 connector
- I²C controller with a RTC module, BMP sensor module and EEPROM connected.
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2, C3, C4, C6, C7, C10, C11, C14, C17, C23, C26, C29, C30, C31, C32 +2 |
| 12 | 100n | Capacitor_SMD:C_1206_3216Metric | C5, C12, C15, C16, C18, C19, C20, C24, C28, C33, C34, C35 |
| 6 | 74HC245 | Package_DIP:DIP-20_W7.62mm_LongPads | U6, U7, U8, U9, U10, U11 |
| 4 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R16, R17, R18, R20 |
| 4 | 61256-15 | Package_DIP:DIP-28_W7.62mm_Socket_LongPads | U2, U3, U4, U5 |
| 4 | 74AC573 | Package_DIP:DIP-20_W7.62mm_LongPads | U12, U13, U15, U16 |
| 4 | BAT43 | Diode_THT:D_DO-34_SOD68_P2.54mm_Vertical_KathodeUp | D1, D2, D3, D5 |
| 3 | 10µ | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C13, C25, C27 |
| 3 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R7 |
| 3 | 500 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R6 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R14, R15 |
| 2 | 2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R8 |
| 2 | 47 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R11 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D4 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R19 |
| 1 | 27C512 | Package_DIP:DIP-28_W15.24mm_Socket_LongPads | U18 |
| 1 | 2K2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R13 |
| 1 | 3.6V | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | 47µ | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C22 |
| 1 | 4K7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R12 |
| 1 | 50.35 MHz | Oscillator:Oscillator_DIP-8 | X1 |
| 1 | 500 | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 1 | 56 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 74AC245 | Package_DIP:DIP-20_W7.62mm_LongPads | U17 |
| 1 | 74ACT32 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U22 |
| 1 | 74F166 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U19 |
| 1 | 74HC00 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U20 |
| 1 | 74LVC4245A | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U21 |
| 1 | CHARPIXEL | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | EPM240T100 | Package_QFP:LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | EPM7064S | Package_LCC:PLCC-44_THT-Socket | U14 |
| 1 | Edge72 | Mini8086:BUS_72 | X2 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | JTAG | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | LM317_TO-220 | Package_TO_SOT_THT:TO-220-3_Vertical | U23 |
| 1 | VGA connector | Connector_Dsub:DSUB-15-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm | J1 |
More from svpetry/Mini8086
7- 2 layers99.8 × 100.8 mm

- 4 layers131.1 × 99.1 mm

- 4 layers119.1 × 99.1 mm

- 4 layers98.8 × 100.1 mm

- 4 layers160 × 100.1 mm

- 2 layers160 × 100.1 mm

- 2 layers99.1 × 99.6 mm

Similar boards
- 4 layers169.7 × 99.8 mm

- 4 layers76.7 × 76.7 mm

- 2 layers233.4 × 280 mm

- 2 layers160 × 100 mm

- 2 layers84 × 89 mm

14MHz Accelerator V2 2
Mathesar/14mhz-accelerator
14MHz 68000 accelerator with 1MB fast ram for amiga 500
42 parts78 - 4 layers

6-Slot Backplane
transistorfet/retroverse
A collection of VME-based hardware and software for modular computers
136 parts17 - 4 layers401.3 × 203.2 mm

Cpu010
thorpej/pg68k
The 68k Playground, a 680x0-based home-brew computer with multiple CPU options
272 parts15 - 2 layers160 × 100 mm

Questions
How big is the Vga PCB?
It measures 160 × 111.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Vga use?
90 parts, built around the EPM240T100C3, 74HC245D, 74AC245SC and 74AC573PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vga KiCad files?
From the svpetry/Mini8086 repository on GitHub, at the commit this page was made from: the board is KiCad/vga/vga.kicad_pcb and its schematic KiCad/backplane/backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vga design in my own project?
Its repository states no licence, so its author keeps all rights: ask svpetry before reusing the design.