Skip to the content
2 layers110.3 × 95.6 mmTheMagicKeys, the printed circuit board in 3D

An esp32 soft to handle a old keyboard and turn into a midi one

Size
110.3 × 95.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
70
Pads
165
Tracks, vias
351, 12
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
22 Oct 2024
Updated
10 Oct 2026

Overview

TheMagicKeys is an open-source printed circuit board by SuperQuentin, from the SuperQuentin/TheMagicKeys repository on GitHub. It is a 2-layer board of 110.3 × 95.6 mm with 19 parts on 70 nets, routed with 351 tracks and 12 vias.

It is built around the L78M05CV. Its parts include 7 connectors, 4 resistors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

Parts

19
QtyValueFootprintReferences
24.7 KOhmPiano_Library:STA_CF14_STPR2, R4
2Conn_02x12_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_VerticalJ3, J4
2~Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_VerticalJ1, J2
12.4 KOhmPiano_Library:STA_CF14_STPR1
147 KOhmsPiano_Library:BO_4606XR3
1Arduino_Nano_EveryModule:Arduino_NanoA1
1Barrel_Jack_Switch_Pin2RingPiano_Library:G-1005BJ5
1Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ7
1Electrosmith_Daisy_SeedModule:Electrosmith_Daisy_SeedA2
1Jack StereoPiano_Library:SAMESKY_SJ3-35083C-TRJ6
1L78M05CVPiano_Library:TO-220_STMU1
1SD Card ReaderPiano_Library:SD_CARD_READERSDCardReaderBreakoutBoard1

The 15 most common of 19 parts.

More from SuperQuentin/TheMagicKeys

2
  • 2 layers62.5 × 103.7 mmSatellite board 6 keys, the printed circuit board in 3D

    Satellite board 6 keys

    SuperQuentin/TheMagicKeys

    An esp32 soft to handle a old keyboard and turn into a midi one

    20 parts
  • 2 layers104.1 × 81.3 mmProjet piano proto kicad, the printed circuit board in 3D

    Projet piano proto kicad

    SuperQuentin/TheMagicKeys

    An esp32 soft to handle a old keyboard and turn into a midi one

    16 parts

Similar boards

  • 2 layers169.4 × 48.8 mmUsb morse keyer, the printed circuit board in 3D

    Usb morse keyer

    dilshan/usb-morse-keyer

    PIC16F886 based CW auto key controller with USB support

    84 parts17MIT
  • 2 layers121 × 75.5 mmJlctest, the printed circuit board in 3D

    Jlctest

    cjheath/jlcbasic

    JLC Basic parts library for Kicad fetched and converted from EasyEDA

    46 parts5
  • 2 layers50 × 50 mmSeriallight, the printed circuit board in 3D

    Seriallight

    eurovibes/seriallight

    Enlight the shiny Berlin S-Bahn character lights

    71 parts
  • 2 layers110.5 × 104.1 mmPjc kicad, the printed circuit board in 3D

    Pjc kicad

    jdeguire/pjcontroller

    Hardware and software for controlling your homebuilt video-beaming creation.

    89 partsGPL-3.0
  • 2 layers103 × 67.8 mmESP pwm-4ch V2, the printed circuit board in 3D

    ESP pwm-4ch V2

    koson/ESP-pwm-4ch

    ESP8266/ESP32 based board with 4x PWM output channels.

    38 parts
  • 2 layers113 × 67.8 mmESP pwm-8ch V1, the printed circuit board in 3D

    ESP pwm-8ch V1

    koson/ESP-pwm-8ch

    ESP8266/ESP32 based board with 8x PWM output channels.

    48 parts
  • 2 layers65.3 × 100 mmMutant SMD, the printed circuit board in 3D

    Mutant SMD

    soggybag/Mutant-SMD

    A redesign of the Mutant generative synth (MeeBleeps, https://github.com/Meebleeps/MeeBleeps-Mutant-Synth), based on the Eurorack version in /Documents/Arduino/projects/MutantGenerativeArduinoSynth/ (Instructables…

    49 parts
  • 2 layers64.8 × 25.4 mmFpv board, the printed circuit board in 3D

    Fpv board

    zaerik/RAPTOR

    RAPTOR Advanced Platform for TeleOperated Reconnaissance

    14 partsMIT

Questions

How big is the TheMagicKeys PCB?

It measures 110.3 × 95.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TheMagicKeys use?

19 parts, built around the L78M05CV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TheMagicKeys KiCad files?

From the SuperQuentin/TheMagicKeys repository on GitHub, at the commit this page was made from: the board is hardware/main_board/main_board.kicad_pcb and its schematic hardware/main_board/main_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TheMagicKeys design in my own project?

Its repository states no licence, so its author keeps all rights: ask SuperQuentin before reusing the design.