Skip to the content
2 layers15.5 × 0.3 mmWatch, the printed circuit board in 3D

WristWatch

Size
15.5 × 0.3 mm
Copper layers
2
Thickness
1 mm
Parts
36
Nets
36
Pads
129
Tracks, vias
433, 23
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
29 Jul 2018
Updated
29 May 2022

Overview

Watch is an open-source printed circuit board by sulkith, from the sulkith/BCDWristWatch repository on GitHub, published under the MIT licence. It is a 2-layer board of 15.5 × 0.3 mm with 36 parts on 36 nets, routed with 433 tracks and 23 vias.

It is built around the BMA456. Its parts include 16 diodes, 6 capacitors, 5 resistors, 5 connectors and 2 ICs. It belongs with the wearables boards and the STM32 boards of this library.

Main components

1

README

README.md

Parts

36
QtyValueFootprintReferences
16LEDLEDs:LED_0603D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16
6CCapacitors_SMD:C_0603_HandSolderingC1, C2, C3, C4, C5, C6
4Conn_01x01ProjectSpecific:TestPointJ2, J3, J4, J5
4RResistors_SMD:R_0603R1, R2, R3, R4
1BMA456ProjectSpecific:BMA456IC1
1Battery_CellProjectSpecific:BatteryHolderCR2032BT1
1Conn_01x10Connector_FFC-FPC:TE_1-1734839-0_1x10-1MP_P0.5mm_HorizontalJ1
1CrystalCrystals:Crystal_SMD_2012-2pin_2.0x1.2mm_HandSolderingY1
1RResistor_SMD:R_0603_1608MetricR5
1STM32L432KBUxPackage_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.65x3.65mmU1

More from sulkith/BCDWristWatch

8
  • 2 layersAnalogWatch, the printed circuit board in 3D

    AnalogWatch

    sulkith/BCDWristWatch

    WristWatch

    75 parts2MIT
  • 2 layersAnalogWatch, the printed circuit board in 3D

    AnalogWatch

    sulkith/BCDWristWatch

    WristWatch

    70 parts2MIT
  • 2 layers15.5 × 0.3 mmWatch, the printed circuit board in 3D

    Watch

    sulkith/BCDWristWatch

    WristWatch

    43 parts2MIT
  • 2 layers15.5 × 0.3 mmWatch, the printed circuit board in 3D

    Watch

    sulkith/BCDWristWatch

    WristWatch

    43 parts2MIT
  • 2 layers15.2 × 8.3 mmWatch wrong, the printed circuit board in 3D

    Watch wrong

    sulkith/BCDWristWatch

    WristWatch

    35 parts2MIT
  • 2 layers17.8 × 6.3 mmWatch old, the printed circuit board in 3D

    Watch old

    sulkith/BCDWristWatch

    WristWatch

    33 parts2MIT
  • 2 layers28.3 × 23.1 mmLiPo Wireless, the printed circuit board in 3D

    LiPo Wireless

    sulkith/BCDWristWatch

    WristWatch

    23 parts2MIT
  • 2 layers39.2 × 15.9 mmLiPo Circuit, the printed circuit board in 3D

    LiPo Circuit

    sulkith/BCDWristWatch

    WristWatch

    16 parts2MIT

Similar boards

  • 4 layers33.8 × 38 mmYatchy, the printed circuit board in 3D

    Yatchy

    Szybet/Yatchy

    A modular, hackable, improved watchy like watch

    92 parts184
  • 6 layers15.2 × 34 mmPlajtime main, the printed circuit board in 3D

    Plajtime main

    Plajta/PlajTime-Hardware

    Here lays the current and past HW designs of our PlajTime smartwatch. That includes all the boards and the chassis.

    85 parts3CC-BY-SA-4.0
  • 6 layers38 × 39 mmWatch, the printed circuit board in 3D

    Watch

    cruzsbrian/smartwatch

    61 parts1
  • 4 layers46 × 46 mmPlacement, the printed circuit board in 3D

    Placement

    anil08607/stm32-smartwatch

    A 46 × 46 mm, four-layer Bluetooth smartwatch PCB with a Nordic nRF52810-QFAA, 240 × 240 SPI LCD interface, BMA456 accelerometer, battery-backed PCF8563 RTC, USB-C 5 V charging, protected single-cell battery interface…

    71 parts
  • 2 layers65.8 × 21.8 mmRear light, the printed circuit board in 3D

    Rear light

    c4deszes/bike-rear-light

    Rear light for the bicycle with braking indication

    109 parts
  • 4 layers50 × 81 mmImu mouse, the printed circuit board in 3D

    Imu mouse

    LassiHeikkila/imu-mouse-hw

    KiCad project for IMU based BLE mouse

    86 parts
  • 4 layers60 × 45 mmWaste management, the printed circuit board in 3D

    Waste management

    embeddedos-org/eCAD-Hardware-Products

    Hardware designs + EE docs + Board datasheets of Multiple products

    66 parts8MIT
  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    36 parts1kGPL-3.0

Questions

How big is the Watch PCB?

It measures 15.5 × 0.3 mm and has 2 copper layers, 1 mm thick.

What parts does the Watch use?

36 parts, built around the BMA456. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Watch KiCad files?

From the sulkith/BCDWristWatch repository on GitHub, at the commit this page was made from: the board is Schematics/Schematics_STM/Watch.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Watch design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).