
Multimodal Actuator mk2
TheUnknownAlias/betr_kicad_resources
This repository contains shared KiCad symbols and footprints for our projects.

KiCad project for IMU based BLE mouse
Imu mouse is an open-source printed circuit board by LassiHeikkila, from the LassiHeikkila/imu-mouse-hw repository on GitHub. It is a 4-layer board of 50 × 81 mm with 86 parts on 79 nets, routed with 894 tracks and 173 vias.
It is built around the ANNA-B112-70B, BMM350 and FDV303N, with the BHI360, BMA456 and NPM1100-CAAA-R7 among its other parts. Its parts include 20 resistors, 18 capacitors, 8 ICs, 6 connectors and 5 switches. It belongs with the sensors and measurement boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10kΩ | Resistor_SMD:R_0805_2012Metric | R2, R11, R12, R13, R14, R19, R20 |
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric | C11, C12, C13, C14, C15, C16 |
| 5 | 1MΩ | Resistor_SMD:R_0805_2012Metric | R6, R7, R8, R17, R18 |
| 4 | 10µF | Capacitor_SMD:C_0805_2012Metric | C2, C4, C5, C8 |
| 4 | Conn_01x01_Pin | Connector_Wire:SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm | J1, J2, J5, J6 |
| 3 | 1.0µF | Capacitor_SMD:C_0805_2012Metric | C1, C10, C17 |
| 3 | FDV303N | FDV303N:SOT-23-3L_FAS | U1, U2, U3 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_3.5mm_Pad | H1, H2, H3 |
| 2 | 120Ω | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 2.2µF | Capacitor_SMD:C_0805_2012Metric | C3, C18 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | 5.1kΩ | Resistor_SMD:R_0805_2012Metric | R9, R10 |
| 1 | 1.5MΩ | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 2.2µH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 220kΩ | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 220nF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | Y1 |
| 1 | 340Ω | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 4.7kΩ | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | ANNA-B112-70B | ANNA_B112_70B:XCVR_ANNA-B112-70B | locked |
| 1 | BAT+ | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | BAT- | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | BHI360 | BHI360:XDCR_BHI360 | U6 |
| 1 | BHI360_CLK | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | BHI360_CS | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | BHI360_INT | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | BHI360_MISO | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | BHI360_MOSI | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | BMA456 | BMA456:XDCR_BMA456 | U7 |
| 1 | BMA456_CLK | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | BMA456_CS | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | BMA456_INT | TestPoint:TestPoint_Pad_D1.0mm | TP19 |
| 1 | BMA456_MISO | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | BMA456_MOSI | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | BMM350 | BMM350:BGA9C40P3X3_128X128X50 | U8 |
| 1 | BMM350_SCK | TestPoint:TestPoint_Pad_D1.0mm | TP16 |
| 1 | BMM350_SDA | TestPoint:TestPoint_Pad_D1.0mm | TP17 |
| 1 | Button1 | Button_Switch_SMD:SW_SPST_PTS645 | SW3 |
| 1 | Button2 | Button_Switch_SMD:SW_SPST_PTS645 | SW4 |
| 1 | Button3 | Button_Switch_SMD:SW_SPST_PTS645 | SW5 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J4 |
| 1 | JS202011JAQN | JS202011JAQN (1):JS202011JAQN | SW1 |
| 1 | LED_B | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LED_R | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | NPM1100-CAAA-R7 | NPM1100-CAAA-R7:BGA25C40P5X5_207X207X52N | U4 |
| 1 | PJX8601_R1_00001 | DMC2400UV-13:SOT50P160X60-6N | Q1 |
| 1 | PTS830GM140SMTRLFS | PTS830GM140 SMTR LFS:SWITCH_0SMTRLFS | SW2 |
| 1 | SMLP34RGBN1W3 | footprints:SMLP34_ROM | LED1 |
| 1 | TPS7A0533PDBV | Package_TO_SOT_SMD:SOT-23-5 | U9 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | J3 |
| 1 | VBUS | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | VDD_1.8 | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | VDD_1.8V | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | VDD_LP_SENS | TestPoint:TestPoint_Pad_D1.0mm | TP18 |
| 1 | VSYS | TestPoint:TestPoint_Pad_D1.0mm | TP4 |

TheUnknownAlias/betr_kicad_resources
This repository contains shared KiCad symbols and footprints for our projects.


HeyPCB/senswear-kicad
Sens Wear's SensWear smart ring hardware, converted from their Altium design to KiCad 10. Design by Sens Wear (github.com/Sens-Wear/hardware), MIT.


Monty103/MSBE_v3
An ultra-compact, low-power wearable audio device featuring bone-conduction technology, digital PDM voice capture, and multi-gesture touch controls.

Niqtan/Pagtingin-to-Highway
Version of Pagtingin Repo for Hack Club's Highway Program


Plajta/PlajTime-Hardware
Here lays the current and past HW designs of our PlajTime smartwatch. That includes all the boards and the chassis.
It measures 50 × 81 mm and has 4 copper layers, 1.62 mm thick.
86 parts, built around the ANNA-B112-70B, BMM350, FDV303N and BHI360. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LassiHeikkila/imu-mouse-hw repository on GitHub, at the commit this page was made from: the board is imu-mouse.kicad_pcb and its schematic imu-mouse.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask LassiHeikkila before reusing the design.