
MSBE V3 BGA
Monty103/MSBE_v3
An ultra-compact, low-power wearable audio device featuring bone-conduction technology, digital PDM voice capture, and multi-gesture touch controls.

An ultra-compact, low-power wearable audio device featuring bone-conduction technology, digital PDM voice capture, and multi-gesture touch controls.
MSBE V3 is an open-source printed circuit board by Monty103, from the Monty103/MSBE_v3 repository on GitHub. It is a 4-layer board of 49.3 × 60.1 mm with 88 parts on 122 nets, routed with 880 tracks and 215 vias.
It is built around the NRF5340-QKAA-R, MPR121QR2 and BMA400, with the NPM1100-CAAA-R7 and SPH18R1LM4H-1-8 among its other parts. Its parts include 40 capacitors, 22 resistors, 7 connectors, 5 ICs and 5 inductors. It belongs with the nRF52 and nRF5x boards of this library.
An ultra-compact, low-power wearable audio device featuring bone-conduction technology, digital PDM voice capture, and multi-gesture touch controls.
| Component | Part Number | Function | Interface |
|---|---|---|---|
| Main MCU | nRF5340-CLAA-R | Dual-core Bluetooth 5.4 SoC (App & Network) | N/A |
| PMIC | nPM1100 | Battery charging & high-efficiency power regulation | Analog/NTC |
| Audio Driver | MAX98357A (x2) | Class D I2S Amp for Bone Conduction Speakers | I2S |
| Microphone | SPH18R1LM4H-1 | Digital MEMS Microphone for Voice/Calls | PDM |
| Motion Sensor | BMA400 | Ultra-low power accelerometer (Proximity/Wake-up) | I2C |
| Touch Controller | MPR121 | 12-Channel Capacitive Touch (Slider/Gestures) | I2C |
The Application Core handles the I2S audio stream and gesture logic from the MPR121, while the Network Core manages the Bluetooth Low Energy (BLE) stack.
Two drivers are utilized to provide a stereo bone-conduction experience. These chips convert the digital I2S signal from the nRF5340 directly into analog power for the transducers.
A high-performance PDM microphone. It operates in multiple power modes (Sleep, Low-Power, Normal) controlled dynamically by the nRF5340’s clock frequency to preserve battery life.
The PMIC ensures maximum battery life using a high-efficiency buck regulator.
| Signal | nRF5340 Pin | Hardware Pin | Shared Bus |
|---|---|---|---|
| I2C SCL | P0.04 | BMA400 (12) / MPR121 (3) | Yes |
| I2C SDA | P0.05 | BMA400 (2) / MPR121 (4) | Yes |
| PDM CLK | P0.26 | Mic (Clock) | No |
| PDM DATA | P0.25 | Mic (Data) | No |
| I2S SCK | P1.12 | MAX98357A (BCLK) | Yes |
| I2S LRCLK | P1.13 | MAX98357A (WS) | Yes |
| I2S SDOUT | P1.14 | MAX98357A (Din) | Yes |
| BMA INT | P0.06 | BMA400 (INT1) | No |
| Touch IRQ | P0.08 | MPR121 (IRQ) | No |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C10, C11, C18, C30, C31, C33, C34, C35, C36, C37, C38 |
| 5 | 1K5 | Resistor_SMD:R_0603_1608Metric | R14, R15, R18, R22, R23 |
| 5 | 1K8 | Resistor_SMD:R_0603_1608Metric | R16, R17, R19, R24, R25 |
| 5 | 1uF | Capacitor_SMD:C_0603_1608Metric | C12, C13, C15, C17, C20 |
| 5 | 30pF | Capacitor_SMD:C_0603_1608Metric | C42, C45, C49, C50, C51 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C25, C26, C27, C28 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C9, C23 |
| 3 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C14, C16, C21 |
| 3 | 5K1R | Resistor_SMD:R_0603_1608Metric | R2, R3, R5 |
| 3 | N.M. | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5 |
| 2 | 10uH | Inductor_SMD:L_0603_1608Metric | L3, L4 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | 1K5R | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | Boneconduction | myLib:Pad_2Pin_1.5x0.8mm | LS4, LS5 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 0.7pF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 2.2nH | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 2.2uH | Inductor_SMD:L_0603_1608Metric | L5 |
| 1 | 2R2 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 32.768kHz | lib:XTAL_ABS05-32.768KHZ-T | Y2 |
| 1 | 32MHz | myLib:YSX321SL - 32Mhz Crystal | Y1 |
| 1 | 47uF | Capacitor_SMD:C_0603_1608Metric | C32 |
| 1 | 680k | Resistor_SMD:R_0603_1608Metric | R34 |
| 1 | 75k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Antenna_Shield | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | AE1 |
| 1 | BMA400 | myLib:QFN_BMA400_BOS | U1 |
| 1 | Battery_Cell | myLib:Pad_3Pin_1.5x0.8mm | BT1 |
| 1 | High-V | myLib:Pad_prog_4Pad | J6 |
| 1 | Low-V | myLib:Pad_prog_4Pad | J8 |
| 1 | Low-V-TH | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J9 |
| 1 | MAX98357AEWL_T | lib:MAX98357AETE_QFN16 | U6 |
| 1 | MPR121QR2 | myLib:MPR121 | U2 |
| 1 | N.C. | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | N.M. | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | NPM1100-CAAA-R7 | myLib:NPM1100-CAAA-BGA25C40P5X5_207X207X52N | U4 |
| 1 | NRF5340-QKAA-R | Package_DFN_QFN:Nordic_AQFN-94-1EP_7x7mm_P0.4mm | U3 |
| 1 | Prog | myLib:Pad_prog_4Pad | J4 |
| 1 | SPH18R1LM4H-1-8 | myLib:MIC_SPH18R1LM4H_KNO | LS1 |
| 1 | Touch Pads | myLib:Pad_3Pin_1.5x0.8mm | J2 |
| 1 | UART | myLib:Pad_3Pin_1.5x0.8mm | J3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4110 | J1 |

Monty103/MSBE_v3
An ultra-compact, low-power wearable audio device featuring bone-conduction technology, digital PDM voice capture, and multi-gesture touch controls.

Monty103/MSBE_v3
An ultra-compact, low-power wearable audio device featuring bone-conduction technology, digital PDM voice capture, and multi-gesture touch controls.



Niqtan/Pagtingin-to-Highway
Version of Pagtingin Repo for Hack Club's Highway Program


yukihamada/koe-device
Koe — AI voice companion device + Soluna Edition festival audio. Open hardware, ESP32-S3 + Raspberry Pi CM5, GPS atomic clock sync.

AarnimM22/HD800-wireless
dual CS43131 + nrf5340 DAC/AMP for turning Sennheiser HD800 into wireless

jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

Open-Smartwatch/open-smartwatch-gps
Hardware design files for the GPS version of the open-smartwatch
It measures 49.3 × 60.1 mm and has 4 copper layers, 1.6 mm thick.
88 parts, built around the NRF5340-QKAA-R, MPR121QR2, BMA400 and NPM1100-CAAA-R7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Monty103/MSBE_v3 repository on GitHub, at the commit this page was made from: the board is hardware/kicad/ver_1.0 - test 2/MSBE_V3.kicad_pcb and its schematic hardware/kicad/ver_1.0 - test 2/MSBE_V3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Monty103 before reusing the design.