

Nrf5340 qkaa config1
Mechanical keyboard PCB loosely based on the GH60
- Size
- 17 × 15 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 70
- Pads
- 158
- Tracks, vias
- 465, 111
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Mar 2026
- Updated
- 24 Mar 2026
Overview
Nrf5340 qkaa config1 is an open-source printed circuit board by smcgee8894, from the smcgee8894/babu60 repository on GitHub. It is a 4-layer board of 17 × 15 mm with 30 parts on 70 nets, routed with 465 tracks and 111 vias.
It is built around the NRF5340-QKAA-R. Its parts include 21 capacitors, 4 inductors, 2 crystals, 1 resistor and 1 IC. It belongs with the nRF52 and nRF5x boards of this library.
Main components
1README
README.mdbabu60
Mechanical keyboard PCB loosely based on the GH60
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitors$:CAPC0603X03L_C | C6, C8, C10, C11, C14, C15 |
| 4 | 1.0µF | Capacitors$:CAPC1005X04L | C2, C3, C7, C16 |
| 3 | 100nF | Passive:CAPC0603X03L_C | C9, C12, C13 |
| 3 | 10µH | Inductors$:INDC1608X06L | L2, L3, L4 |
| 2 | 4.7µF | Passive:CAPC1608X06L | C17, C18 |
| 1 | |||
| 1 | 0.7pF | Capacitors$:CAPC0603X03L_C | C1 |
| 1 | 1.0µF | Nordic Passive DB:CAPC1005X04L | C5 |
| 1 | 2.2nF | Capacitors$:CAPC0603X03L_C | C4 |
| 1 | 2.2nH | Passive:INDC0603X03L_C | L1 |
| 1 | 2.2µF | Capacitors$:CAPC1608X06L | C19 |
| 1 | 2R2 | Passive:RESC0603X03L_C | R1 |
| 1 | 32.768kHz | Crystal_Osc$:XTAL_2012 | X2 |
| 1 | 32MHz | Crystal_Osc$:BT-XTAL_2016 | X1 |
| 1 | 4.7µF | Capacitors$:CAPC1608X06L | C20 |
| 1 | N.C. | Parts$:CAPC0603X03L_C_NC | C21 |
| 1 | nRF5340-QKAA | nRF Devices$:AQFN40P700X700X85_HS-99N | U1 |
More from smcgee8894/babu60
1- 2 layers285 × 94.6 mm

Similar boards
- 4 layers45 × 30 mm

Koe pro v2
yukihamada/koe-device
Koe — AI voice companion device + Soluna Edition festival audio. Open hardware, ESP32-S3 + Raspberry Pi CM5, GPS atomic clock sync.
47 parts1MIT - 4 layers71.9 × 20 mm

HD800-wireless
AarnimM22/HD800-wireless
dual CS43131 + nrf5340 DAC/AMP for turning Sennheiser HD800 into wireless
121 parts - 4 layers49.3 × 60.1 mm

MSBE V3
Monty103/MSBE_v3
An ultra-compact, low-power wearable audio device featuring bone-conduction technology, digital PDM voice capture, and multi-gesture touch controls.
88 parts - 2 layers95 × 65 mm

Cryo sentinel
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
23 parts - 4 layers55.5 × 65 mm

Jitx design
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
30 parts5.1kGPL-3.0 - 4 layers23 × 53 mm

Easyduino STM32F103
Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards
30 parts755CERN-OHL-P-2.0 - 4 layers112.1 × 64 mm

- 4 layers15.2 × 19 mm

Questions
How big is the Nrf5340 qkaa config1 PCB?
It measures 17 × 15 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Nrf5340 qkaa config1 use?
30 parts, built around the NRF5340-QKAA-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nrf5340 qkaa config1 KiCad files?
From the smcgee8894/babu60 repository on GitHub, at the commit this page was made from: the board is Components/nrf5340-xxaa-reference-layout-1_3/nRF5340-QKAA Reference Layout 1_2/Altium Designer files/nrf5340_qkaa_config1.kicad_pcb and its schematic babu60/babu60.kicad_blocks/Key.kicad_block/Key.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nrf5340 qkaa config1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask smcgee8894 before reusing the design.