2 layers39 × 83 mm
2 layers98.1 × 98.1 mm
Hackomat
sudoroom/hackomat4hacker vending machine based on Snackshop 2
- Size
- 98.1 × 98.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 66
- Pads
- 327
- Tracks, vias
- 648, 36
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Oct 2014
- Updated
- 25 Apr 2019
Overview
Hackomat is an open-source printed circuit board by sudoroom, from the sudoroom/hackomat repository on GitHub. It is a 2-layer board of 98.1 × 98.1 mm with 54 parts on 66 nets, routed with 648 tracks and 36 vias.
It is built around the MOC3021M and RJ45. Its parts include 42 ICs and 7 connectors.
Main components
2README
README.mdhack-o-mat vending machine
-
so like the triac chips we tried, none of them were good enough for the motors in the vending machine.
-
MOC3021 would work once and then fail closed, running the motor forever and smoking
-
FOD420 did the same thing basically, although one of them worked a few times first
-
TLP3023 never worked at all, probably because they're only rated for 100mA and died instantly
-
not sure what part to try next
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | MOC3021M | Sockets_DIP:DIP-6__300_ELL | IC1, IC2, IC10, IC11, IC12, IC13, IC14, IC15, IC16, IC17, IC18, IC19, IC20, IC21, IC22, IC23 +26 |
| 5 | CONN_01X01 | Pin_Headers:Pin_Header_Straight_1x01 | PC1, PC2, PC3, PC4, PC5 |
| 4 | CONN_01X01 | Connect:1pin | P35, P36, P42, PAC1 |
| 1 | CONN_02X08 | euro:euro16 | P2 |
| 1 | CONN_02X22 | euro:euro44 | P1 |
| 1 | RJ45 | Connect:RJ45_8 | J1 |
Questions
How big is the Hackomat PCB?
It measures 98.1 × 98.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hackomat use?
54 parts, built around the MOC3021M and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hackomat KiCad files?
From the sudoroom/hackomat repository on GitHub, at the commit this page was made from: the board is hackomat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hackomat design in my own project?
Its repository states no licence, so its author keeps all rights: ask sudoroom before reusing the design.
Similar boards
- 2 layers134.4 × 106.7 mm
Led controller
MbFredys/PCB-LEDs-Controller
LED-controller PCB design exercise focused on PWM control, power distribution, and hardware documentation.
42 parts6 - 2 layers64.3 × 63 mm
Triac AC Dimmer 1P
Eninspace/triac
This project is based on esp8266 and TRIAC for control power via remote control.
28 parts5GPL-3.0 - 2 layers85.1 × 75.6 mm
- 2 layers
- 2 layers95.9 × 129.5 mm
Solderin Station
kr4fty/DiySolderingStation
Diy Soldering Stations with Atmega (Arduino UNO). Firmware and hardware design included
73 parts3GPL-2.0 - 2 layers78.7 × 58.4 mm
- 2 layers101.6 × 50.8 mm
Light switch
NguyenThanhHuy-debug/PCB_Real-Time-Power-Monitoring-System-Development-Light-Switch
PCBReal-Time-Power-Monitoring-System-Development-Light-Switch — a software project built with modern tooling.
142 parts2