Skip to the content
123456

MOC3021M

onsemiExtended

-40℃~+85℃ 0.1mA 1 1.15V 100mA 330mW 4.17kV 400V 6 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHS

Part id
onsemi/MOC3021M
Category
Triac, SCR Output Optoisolators
Package
DIP-6
Pins
6
In stock
35,454 at JLCPCB (C5242)
Used on
80 open-source boards

Overview

The MOC3021M is a triac, SCR Output Optoisolator made by onsemi in a DIP-6 package with 6 pins. -40℃~+85℃ 0.1mA 1 1.15V 100mA 330mW 4.17kV 400V 6 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHS.

PCBKit's library has its KiCad symbol (Relay_SolidState:MOC3021M, from KiCad's library) and its footprint (Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 35,454 are in stock at JLCPCB (part C5242). 80 open-source boards in 64 repositories on GitHub use it.

Symbol

1246
Relay_SolidState:MOC3021MFrom KiCad's library

Footprint

123456
Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

6
The pins of the MOC3021M
PinNameType
1—Passive
2—Passive
3NCNot connected
4—Passive
5NCNot connected
6—Passive

Open-source boards using it

80See all 80
  • 2 layers39 × 83 mmDimmer 2.0, the printed circuit board in 3D

    Dimmer 2.0

    ageurtse/Wifi-Dimmer

    This is all about my home build WiFi Dimmer

    27 parts6
  • 2 layers134.4 × 106.7 mmLed controller, the printed circuit board in 3D

    Led controller

    MbFredys/PCB-LEDs-Controller

    LED-controller PCB design exercise focused on PWM control, power distribution, and hardware documentation.

    42 parts6
  • 2 layers64.3 × 63 mmTriac AC Dimmer 1P, the printed circuit board in 3D

    Triac AC Dimmer 1P

    Eninspace/triac

    This project is based on esp8266 and TRIAC for control power via remote control.

    28 parts5GPL-3.0
  • 2 layers85.1 × 75.6 mmSpotWelderTrigger, the printed circuit board in 3D

    SpotWelderTrigger

    maciejkwasek/SpotWelderTrigger_Hw

    Hardware for SpotWelderController.

    37 parts4MIT
  • 2 layersDimmer, the printed circuit board in 3D

    Dimmer

    Sartalan/Hidroponia-Project

    Una hidroponia automatizada

    37 parts4
  • 2 layers98.1 × 98.1 mmHackomat, the printed circuit board in 3D

    Hackomat

    sudoroom/hackomat

    hacker vending machine based on Snackshop 2

    54 parts4
  • 2 layers95.9 × 129.5 mmSolderin Station, the printed circuit board in 3D

    Solderin Station

    kr4fty/DiySolderingStation

    Diy Soldering Stations with Atmega (Arduino UNO). Firmware and hardware design included

    73 parts3GPL-2.0
  • 2 layers78.7 × 58.4 mmDimmerESP32, the printed circuit board in 3D

    DimmerESP32

    martinhofigueiredo/SE

    Sistemas Embarcados

    12 parts3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MOC3021M?

Yes. The symbol is Relay_SolidState:MOC3021M and the footprint Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MOC3021M?

DIP-6, with 6 pins. Its footprint is drawn on this page.

Where is the MOC3021M datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the MOC3021M?

JLCPCB lists it as part C5242, with 35,454 in stock; the sellers' links on this page open their listings.

What can replace the MOC3021M?

Parts like it in the library: the EL3053 by Everlight Electronics, the MOC3052 by Lite-On, the MOC3053M(UMW) by UMW and the MOC3081M(UMW) by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MOC3021M?

80 boards in 64 repositories on GitHub; the most starred are listed on this page, with their KiCad files.