4 layers101 × 48 mm
4 layers100 × 75 mm
RemoteController
steewbsd/gilgamesh- Size
- 100 × 75 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 138
- Nets
- 112
- Pads
- 439
- Tracks, vias
- 783, 338
- Pours
- 23
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Jun 2025
- Updated
- 6 Aug 2026
Overview
RemoteController is an open-source printed circuit board by steewbsd, from the steewbsd/gilgamesh repository on GitHub. It is a 4-layer board of 100 × 75 mm with 138 parts on 112 nets, routed with 783 tracks and 338 vias.
It is built around the H3-TCD-12-222X+, MAX7044AKA+T and MICRF220AYQS, with the SPF5043Z, XA17-G4K and LM358 among its other parts. Its parts include 53 capacitors, 37 resistors, 16 ICs, 8 inductors and 7 connectors. It belongs with the nRF52 and nRF5x boards of this library.
Main components
12
H3-TCD-12-222X+
SMD-5P,3.8x3.8mm-40℃~+85℃ 13.4dB 17dB 1dB、1.1dB、3.6dB 5MHz~2.25GHz Integrated termination at isolated port SMD-5P,3.8x3.8mm RF Directional Coupler ROHSHenryTechRF Directional Coupler
MAX7044AKA+T
SOT-23-8-40℃~+125℃ 100Kbps 13dBm 14mA 2.1V~3.6V 300MHz~450MHz 315MHz、433MHz RKE Transmitter SOT-23-8 RF Transceiver ICs ROHSMaxim Integrated (Analog Devices)RF Transceiver ICs
MICRF220AYQS
QSOP-16-150mil-112.5dBm -40℃~+105℃ 20Kbps 300MHz~450MHz 3V~3.6V 433.92MHz 6mA RKE Receivers QSOP-16-150mil RF Transceiver ICs ROHSMicrochip TechnologyRF Transceiver ICs
SPF5043Z
SOT-343-40℃~+85℃ 0.8dB 16dB 17.5dB 18.2dB 22.7dBm 35dBm 4.75V~5.25V 46mA 50MHz~4GHz Linearization design、Bias control circuit SOT-343 RF Amplifiers ROHSQorvoRF Amplifiers
XA17-G4K
SOT-363-40℃~+85℃ 0.7dB 20MHz~4GHz 25dB 30dBm 6V SPDT SOT-363 RF Switches ROHSXINLUDARF Switches
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
TPS562200DDC
UncategorisedTexas Instruments
TS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile Switches
B59721A0100A062
0805-40℃~+125℃ 680Ω ±50% 0805 PTC Thermistors ROHSTDKPTC Thermistors
BWSMA-KWE-Z3.5*4.2
DIP-40℃~+85℃ 1 50Ω 6GHz Bent tip Board Side Inner hole SMA DIP Coaxial Connectors (RF) ROHSBAT WIRELESSCoaxial Connectors (RF)
L327S13CU11L
SMD3225-4P-40℃~+85℃ 13.52313MHz 20pF Crystal Oscillator ±10ppm SMD3225-4P Crystals ROHSLuckiCrystals
ST-0-102-A01-T000-LF
插件,8.3x5.2mm-25℃~+85℃ 125V 23.6mm 3A 5.2mm 8.3mm Cylinder Lever PC Pin SPDT Through Hole 插件,8.3x5.2mm Toggle Switches ROHSYUEN FUNGToggle Switches
Parts
138| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100N | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4, C11, C20, C25, C28, C29, C34, C35, C36, C38, C43, C46, C47 +2 |
| 7 | 1000P | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9, C13, C17, C18, C22, C37, C39 |
| 7 | 10K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R3, R7, R11, R31, R32, R35 |
| 6 | 50K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R5, R6, R18, R21, R34 |
| 5 | 100R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15, R27, R28, R29, R30 |
| 5 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U10, U11, U13, U14, U15 |
| 4 | 0R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R24, R25, R26, R33 |
| 4 | 10P | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7, C8, C32, C33 |
| 4 | 1K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8, R9, R10, R17 |
| 4 | 20P | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C14, C15, C16, C21 |
| 4 | 680P | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C27, C30, C44 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 4 | TS-1088-AR02016 | Button_Switch_SMD:SW_SPST_TS-1088-xR020 | SW2, SW3, SW4, SW5 |
| 3 | 220P | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C26, C45 |
| 2 | 10R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R14 |
| 2 | 10U | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C52, C53 |
| 2 | 22U | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C49, C50 |
| 2 | 27N | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L5, L7 |
| 2 | 4U7 | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C10, C31 |
| 2 | 50R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12, R16 |
| 2 | 52R3 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R13, R22 |
| 2 | 91R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R19, R23 |
| 2 | AD8314RM | Package_SO:MSOP-8_3x3mm_P0.65mm | U6, U7 |
| 2 | Battery_Cell | steew:BH-AAA-B5BA021 | BT1, BT2 |
| 2 | Conn_01x01_Pin | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J7, J8 |
| 2 | H3-TCD-12-222X+ | RF_Mini-Circuits:Mini-Circuits_DB1627 | U4, U8 |
| 2 | ~ | steew:YG16-FL7.8-B10Ka(80)-R | J3, J4 |
| 1 | 100N | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 100P | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C19 |
| 1 | 12P | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C40 |
| 1 | 13.56 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y4 |
| 1 | 15P | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C42 |
| 1 | 18P | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C41 |
| 1 | 1P | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C23 |
| 1 | 1P2 | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C24 |
| 1 | 1U | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C12 |
| 1 | 2N2 | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L4 |
| 1 | 2U2 | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L8 |
| 1 | 32 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y2 |
| 1 | 32.768 KHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y3 |
| 1 | 3K3 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R36 |
| 1 | 4N7 | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L3 |
| 1 | 5K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R37 |
| 1 | 82R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R20 |
| 1 | Antenna_Chip | Inductor_SMD:L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | AE1 |
| 1 | B59721A0100A062 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | TH1 |
| 1 | BWSMA-KWE-Z3.5*4.2 | Connector_Coaxial:SMA_BAT_Wireless_BWSMA-KWE-Z001 | J2 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J5 |
| 1 | GVA-63 | Package_TO_SOT_SMD:SOT-89-3_Handsoldering | U12 |
| 1 | L327S13CU11L | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | MAX7044AKA | Package_TO_SOT_SMD:TSOT-23-8_HandSoldering | U9 |
| 1 | MICRF220AYQS | Package_SO:QSOP-16_3.9x4.9mm_P0.635mm | U3 |
| 1 | SPF5043Z | Package_TO_SOT_SMD:SOT-343_SC-70-4 | U2 |
| 1 | ST-0-102-A01-T000-LF | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
| 1 | TPS562200 | Package_TO_SOT_SMD:SOT-23-6 | U16 |
| 1 | VHF160808H18NJT | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L6 |
| 1 | VHF160808H39NJT | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L2 |
| 1 | XA17-G4K | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U1 |
| 1 | nRF52810-QFxx | Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm | U5 |
More from steewbsd/gilgamesh
3- 4 layers100 × 100 mm
- 4 layers50 × 50 mm
Similar boards
- 6 layers100 × 62 mm
- 6 layers150 × 60 mm
Logic macropad
Greentalinjo/74HController
A game controller built entirely from discrete 74HC logic - no microcontroller, a diode ROM and an 8-N-1 serial frame out of an RJ45 console port.
170 parts - 2 layers77 × 77 mm
Elektroniikkapaja vastaanotin
ripaskajaska/Wireless-weather-station
Aalto University’s ELEC-8701 Elektronics workshop course's repository for Axel Soderberg, Roope Jaskari and Kalle Aro
62 parts - 4 layers96 × 83 mm
- 4 layers130 × 146 mm
Board a routed pass1 fixed
ajisrawi/passive-radar-counter-drone
Passive radar for counter-drone using DVB-T, 4G and 5G: simulation, receiver hardware, FPGA micro-Doppler firmware, antennas, enclosure
194 parts3 - 2 layers150 × 85 mm
RX 50MHz SDR
ne9n/RC_6m
This project focuses on designing and building a modern 50MHz (6-meter) radio control system using the amateur radio bands.
44 parts - 2 layers103 × 50 mm
- 2 layers40 × 78 mm
Hardware v2
rmingon/Falcon-Edge
A 3D-printable flying-wing airframe with a custom ESP32 flight computer—open hardware you can solder, screw together, and fly.
56 parts11
Questions
How big is the RemoteController PCB?
It measures 100 × 75 mm and has 4 copper layers, 1.6 mm thick.
What parts does the RemoteController use?
138 parts, built around the H3-TCD-12-222X+, MAX7044AKA+T, MICRF220AYQS and SPF5043Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RemoteController KiCad files?
From the steewbsd/gilgamesh repository on GitHub, at the commit this page was made from: the board is hw/RemoteController/RemoteController.kicad_pcb and its schematic hw/FlightManagement/Camera.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RemoteController design in my own project?
Its repository states no licence, so its author keeps all rights: ask steewbsd before reusing the design.