
Tinynode
Stary2001/my-mesh-nodes
Here's all my mesh stuff. Everything here is licensed under CERN OHL-P.

Here's all my mesh stuff. Everything here is licensed under CERN OHL-P.
Ebyte e22p-30-zero is an open-source printed circuit board by Stary2001, from the Stary2001/my-mesh-nodes repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board of 65 × 31.5 mm with 20 parts on 40 nets, routed with 183 tracks and 42 vias.
It is built around the AHT20 and CAT24C256LI. Its parts include 4 capacitors, 4 connectors, 3 resistors and 3 ICs.
Here's all my mesh stuff. Everything here is licensed under CERN OHL-P.
Tested, works (as much as STM32 can).
Tested, works. See here for documentation.
Tested, works. See here for documentation.
Untested. Use at your own risk.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH4 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 22u | Capacitor_SMD:C_1206_3216Metric | C3, C4 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | AHT20 | stary:AHT20 | U2 |
| 1 | CAT24C256 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J2 |
| 1 | E22P-xxxMxxS | stary:E22P-xxxM30S | U3 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical_SMD | J1 |
| 1 | ID_WP | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | LOGO | stary-silk:1000xRESIST_Secretary | G*** |

Stary2001/my-mesh-nodes
Here's all my mesh stuff. Everything here is licensed under CERN OHL-P.

Stary2001/my-mesh-nodes
Here's all my mesh stuff. Everything here is licensed under CERN OHL-P.

Stary2001/my-mesh-nodes
Here's all my mesh stuff. Everything here is licensed under CERN OHL-P.

Stary2001/my-mesh-nodes
Here's all my mesh stuff. Everything here is licensed under CERN OHL-P.

Stary2001/my-mesh-nodes
Here's all my mesh stuff. Everything here is licensed under CERN OHL-P.

Stary2001/my-mesh-nodes
Here's all my mesh stuff. Everything here is licensed under CERN OHL-P.

JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware
Volvo MKII Open Hardware

AndreiVladescu/LibrePLC32
The goal of the project is to create a compact, hackable, and well-documented PLC platform for industrial automation experiments, prototyping, education, and open hardware development.

klaus-liebler/labathome
Der kleine Bruder von lab@home. Ermöglicht das Experimentieren mit PT1...PTn-Gliedern, die intern als RC-Kombination (entkoppelt über Operationsverstärker) ausgeführt sind.



SkullKill/ESP32-Wall-Clock-PCB
ESP32 based 30cm Wall Mounted Clock. WiFi, NTP, SNMP, web interface, MicroUsb, Type-C, HG3613 Retrofit

jrtaylor71/ESP32-Simple-Thermostat
Simple ESP32 Thermostat with touch screen
It measures 65 × 31.5 mm and has 4 copper layers, 1.6 mm thick.
20 parts, built around the AHT20 and CAT24C256LI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Stary2001/my-mesh-nodes repository on GitHub, at the commit this page was made from: the board is hardware/ebyte-e22p-30-zero/ebyte-e22p-30-zero.kicad_pcb and its schematic hardware/1x-lipo-board/1s-lipo-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).