
Nuclone tester medium
Squantor/squantorDevelBoards
Various development boards/test for microcontrollers, check for breakouts here

Various development boards/test for microcontrollers, check for breakouts here
Nuclone JTAG interface is an open-source printed circuit board by Squantor, from the Squantor/squantorDevelBoards repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 50 mm with 69 parts on 58 nets, routed with 210 tracks and 25 vias.
It is built around the BSD840N-VB and NTJD4152PT1G. Its parts include 9 capacitors, 5 connectors, 4 resistors, 4 ICs and 2 transistors. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
STM32F030K6 development board inspired by the nucleo series from STM32.
Still some things need to be done:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1uF | SquantorRcl:C_0603 | C1, C2, C3, C4, C5, C6, C7, C8, C9 |
| 4 | 74X1T45 | SquantorIC:SOT363-NXP | U1, U2, U3, U4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 10K | SquantorRcl:R_0603_hand | R1, R2, R4 |
| 2 | VSS | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP3, TP19 |
| 1 | 0.3A | SquantorRcl:F_0603_hand | F1 |
| 1 | 4.7K | SquantorRcl:R_0603_hand | R3 |
| 1 | BSD840N | SquantorIC:SOT363-NXP | Q2 |
| 1 | Conn_02x05_Odd_Even | SquantorConnectors:Header-0127-2X05-H006 | J5 |
| 1 | DevBoardUartInput | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J1 |
| 1 | GPIO_00 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP4 |
| 1 | GPIO_01 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP5 |
| 1 | GPIO_02 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP6 |
| 1 | GPIO_03 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP7 |
| 1 | GPIO_04 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP8 |
| 1 | GPIO_05 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP9 |
| 1 | GPIO_06 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP10 |
| 1 | GPIO_07 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP11 |
| 1 | GPIO_08 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP12 |
| 1 | GPIO_09 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP13 |
| 1 | GPIO_10 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP14 |
| 1 | GPIO_11 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP15 |
| 1 | GPIO_12 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP16 |
| 1 | GPIO_13 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP17 |
| 1 | GPIO_16 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP33 |
| 1 | GPIO_17 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP32 |
| 1 | GPIO_18 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP31 |
| 1 | GPIO_19 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP30 |
| 1 | GPIO_20 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP29 |
| 1 | GPIO_21 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP28 |
| 1 | GPIO_22 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP27 |
| 1 | GPIO_23 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP26 |
| 1 | GPIO_24 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP25 |
| 1 | GPIO_25 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP24 |
| 1 | GPIO_26 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP23 |
| 1 | GPIO_27 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP22 |
| 1 | GPIO_28 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP21 |
| 1 | GPIO_29 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP20 |
| 1 | JLCJLCJLCJLC | SquantorLabels:Label_Generic | N3 |
| 1 | JTAG_2X10_OUT | SquantorConnectors:Header-0254-2X10-H010 | J2 |
| 1 | NTJD4152P | SquantorIC:SOT363-NXP | Q1 |
| 1 | OHWLOGO | Symbols:OSHW-Symbol_6.7x6mm_SilkScreen | N1 |
| 1 | P_14 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP35 |
| 1 | P_15 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP34 |
| 1 | RX | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP36 |
| 1 | TX | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP37 |
| 1 | V20230220 | SquantorLabels:Label_Generic | N2 |
| 1 | VBUS | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP2 |
| 1 | VDD1 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP1 |
| 1 | VDD2 | SquantorTestPoints:TestPoint_hole_H05R10_2side | TP18 |
| 1 | nuclone_small_left | SquantorConnectorsNamed:nuclone_small_left_stacked | J3 |
| 1 | nuclone_small_right | SquantorConnectorsNamed:nuclone_small_right_stacked | J4 |

Squantor/squantorDevelBoards
Various development boards/test for microcontrollers, check for breakouts here

Squantor/squantorDevelBoards
Various development boards/test for microcontrollers, check for breakouts here

Squantor/squantorDevelBoards
Various development boards/test for microcontrollers, check for breakouts here

Squantor/squantorDevelBoards
Various development boards/test for microcontrollers, check for breakouts here

Squantor/squantorDevelBoards
Various development boards/test for microcontrollers, check for breakouts here

Squantor/squantorDevelBoards
Various development boards/test for microcontrollers, check for breakouts here

Squantor/squantorDevelBoards
Various development boards/test for microcontrollers, check for breakouts here

Squantor/squantorDevelBoards
Various development boards/test for microcontrollers, check for breakouts here

Squantor/squantorDevelBoards
Various development boards/test for microcontrollers, check for breakouts here

Squantor/squantorDevelBoards
Various development boards/test for microcontrollers, check for breakouts here

Squantor/squantorDevelBoards
Various development boards/test for microcontrollers, check for breakouts here

Squantor/squantorDevelBoards
Various development boards/test for microcontrollers, check for breakouts here


dojoe/Twonkie
A USB-PD sniffer/injector/sink based on Google's Twinkie, re-designed to be manufactured by mere mortals.


Acliad/toast-o-meter
Breadboard mounted DMM with volts, amps, ohms, continuity, and diode feature.

PStinno/icm-20600-breakout-pcb
Breakout board for the ICM 20600 3-axis Accelerometer and Gyroscope.

ChristianHirsch/mlx90614-stemmaqt
This board features the MLX90614 infrared thermometer with the Adafruit STEMMA QT connector interface.


It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
69 parts, built around the BSD840N-VB and NTJD4152PT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Squantor/squantorDevelBoards repository on GitHub, at the commit this page was made from: the board is electronics/nuclone_JTAG_interface/nuclone_JTAG_interface.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).