2 layers52.1 × 37.4 mm
Consolizer
orangeglo/PS2PSP
Board to connect a PS2 controller to a PSP 2000 (PSP Consolizer)
25 parts38GPL-3.0
4 layers89.3 × 90.7 mm
Breadboard DMM
Acliad/toast-o-meter1Breadboard mounted DMM with volts, amps, ohms, continuity, and diode feature.
- Size
- 89.3 × 90.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 152
- Nets
- 129
- Pads
- 492
- Tracks, vias
- 1,026, 159
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Aug 2020
- Updated
- 17 Feb 2021
Overview
Breadboard DMM is an open-source printed circuit board by Acliad, from the Acliad/toast-o-meter repository on GitHub. It is a 4-layer board of 89.3 × 90.7 mm with 152 parts on 129 nets, routed with 1,026 tracks and 159 vias.
It is built around the LMV358, PDME1-S5-S5-S and NAU7802SGI, with the 74VHC4052AFT, MIC5365-3.3YD5-TR and BSD840N-VB among its other parts. Its parts include 59 resistors, 33 capacitors, 11 diodes, 10 ICs and 9 transistors. It belongs with the STM32 boards of this library.
Main components
12
LMV358
SOP-8-40℃~+125℃ 10pA 10pA 1MHz 2 2.5V~5.5V 20mA 20nV/√Hz@10kHz 2uV/℃ 40uA 5mV 600V/ms 65dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOP-8 Operational Amplifier ROHSTECH PUBLICOperational AmplifierPDME1-S5-S5-S
SIP,19.7x6mmIsolated Power ModulesCUI
NAU7802SGI
SOP-16-40℃~+85℃ 2 2.1mA 2.7V~5.5V 24 4.9152MHz 80Hz Auto calibration、Built-in temperature sensor、Multiplexers、Power-on reset External External、Built-in I2C Sigma-Delta Support Yes SOP-16 Analog to Digital Converters (ADC) ROHSNuvoton TechAnalog To Digital Converters (ADC)
74VHC4052AFT
TSSOP-16-175mil-40℃~+125℃ 12ns 12ns 2 200MHz 24Ω 2V~5.5V 4:1 6ns TSSOP-16-175mil Analog Switches, Multiplexers ROHSToshibaAnalog Switches, Multiplexers
MIC5365-3.3YD5-TR
TSOT-23-5-40℃~+125℃@(Tj) 1 150mA 200uVrms 3.3V 310mV@(150mA) 39uA 5.5V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BSD840N-VB
SC-70-6MOSFETsVBsemi Elec
EC2-5NU
DIP,15x7.5mm-40℃~+85℃ 140mW 15mm 178Ω 1ms 220V@DC、250V@AC 2A 2ms 500mA@125VAC、2A@30VDC 5V 7.5mm 75mΩ 9.4mm Silver Alloy Two sets of changeover: 2C (DPDT) DIP,15x7.5mm Signal Relays ROHSKEMETSignal Relays
DF2B7AFU,H3F
SC-76(SOD-323)100nA 20V 4A@8/20us 5.5V 5.8V 8.5pF 80W@8/20us IEC 61000-4-2 TVS Unidirectional SC-76(SOD-323) ESD and Surge Protection (TVS/ESD) ROHSToshibaESD And Surge Protection (TVS/ESD)
DMP3085LSD
SO-8-55℃~+150℃ 1.1W 11nC@10V 2 P-Channel 3.9A 30V 3V 41pF 48pF 563pF 70mΩ@10V、95mΩ@4.5V P-Channel SO-8 MOSFETs ROHSDiodes IncorporatedMOSFETsL102021ML04Q
插件-30℃~+65℃ 28V PC Pin Rectangular Columnar SPDT Through Hole Plugin Slide Switches ROHSC&KSlide Switches
PKM13EPYH4000-A0
插件,D=12.6mm-40℃~+85℃ 12.6mm 4kHz 5mm 7.4mm 78dB Passive (Externally Driven) Piezoelectric ±15V 插件,D=12.6mm Buzzers ROHSMurataBuzzers
PMBT2907A
SOT-23-65℃~+150℃ 1 PNP 10nA 200MHz 250mW 300 400mV 5V 600mA 60V PNP SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)
Parts
152| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R205, R207, R305, R306, R309, R310, R401, R407, R410, R501, R502, R504, R507, R703, R704, R708 +5 |
| 14 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R201, R202, R203, R204, R206, R208, R307, R308, R408, R412, R503, R505, R506, R711 |
| 14 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C107, C108, C201, C202, C203, C204, C205, C206, C207, C208, C301, C401, C402, C501 |
| 12 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C209, C210, C211, C212, C403, C701, C702, C703, C705, C706, C707, C708 |
| 10 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R101, R402, R403, R404, R405, R707, R709, R712, R713, R715 |
| 9 | 1N4007 | Diode_SMD:D_SOD-123 | D301, D302, D501, D601, D602, D603, D604, D701, D702 |
| 7 | BSD840N | Package_TO_SOT_SMD:SOT-363_SC-70-6_Handsoldering | Q201, Q301, Q401, Q402, Q501, Q502, Q701 |
| 5 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C101, C102, C104, C105, C704 |
| 4 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R701, R702, R705, R706 |
| 3 | EC2-5NU | Relay_THT:Relay_DPDT_Kemet_EC2 | K301, K302, K501 |
| 3 | SW_Push | irex_Button_Switch_SMD:SW_PUSH-12mm_Wuerth-430476085716_HandSolder | SW702, SW703, SW705 |
| 2 | 22uF | Capacitor_SMD:CP_Elec_5x5.3 | C103, C106 |
| 2 | 6.8uH | Inductor_SMD:L_Taiyo-Yuden_NR-30xx_HandSoldering | L101, L102 |
| 2 | 750k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R302, R304 |
| 2 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J101, J102 |
| 2 | LMV358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U301, U401 |
| 2 | SW_Push | irex_Button_Switch_SMD:SW-PUSH-6x3.5mm_CK-PTS636SL43x_HandSolder | SW701, SW704 |
| 2 | TestPoint | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP701, TP702 |
| 1 | 0.1 | Resistor_SMD:R_Shunt_Ohmite_LVK24 | R601 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R801 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R409 |
| 1 | 10M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R301 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R803 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R406 |
| 1 | 2.0A | Fuse:Fuseholder_Littelfuse_Nano2_154x | F601 |
| 1 | 74VHC4052AFT | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U501 |
| 1 | 820k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R303 |
| 1 | 910k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R411 |
| 1 | AudioJack3 | irex_Connector_Audio:Jack_3.5mm_CUI_SJ1-3523N_Horizontal | J702 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J701 |
| 1 | Conn_02x02_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Horizontal | J703 |
| 1 | DF2B7AFU | Diode_SMD:D_SOD-323_HandSoldering | D401 |
| 1 | DMP3085LSD | Package_SO:SO-8_3.9x4.9mm_P1.27mm | Q801 |
| 1 | I+ | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J302 |
| 1 | IREX_LOGO | irex_Aesthetic:Logo_irex_10.0x11.1mm_Copper | G*** |
| 1 | L102021ML04Q | irex_Button_Switch_THT:SW_CuK_L102021ML04Q_SPDT_Angled | SW101 |
| 1 | LCD-Generic_3.2in_SPI_SD | irex_Display:LCD-Generic-3.2in_89.30x55.04mm_ReducedCourtyard | DS701 |
| 1 | LOGO | Breadboard_DMM_Aesthetic:ohms_cont_diode | G*** |
| 1 | LOGO | Breadboard_DMM_Aesthetic:input_amps | G*** |
| 1 | LOGO | Breadboard_DMM_Aesthetic:amp | G*** |
| 1 | LOGO | Breadboard_DMM_Aesthetic:input_v | G*** |
| 1 | LOGO | Breadboard_DMM_Aesthetic:volt | G*** |
| 1 | MAX6070x41 | Package_TO_SOT_SMD:SOT-23-6 | U202 |
| 1 | MCP1501 | Package_TO_SOT_SMD:SOT-23-6 | U402 |
| 1 | MIC5365-3.3YD5 | Package_TO_SOT_SMD:SOT-23-5 | U101 |
| 1 | NAU7802 | Package_SO:SOP-16_4.55x10.3mm_P1.27mm | U201 |
| 1 | PDME1-S5-S5-S | irex_Converter_DCDC:CUI_DCDC-CONVERTER_PDME1-Sxx-S_1x4_P2.54mm_Drill1.0mm | PS101 |
| 1 | PKM13EPYH4000-A0 | irex_Buzzer_Beeper:Buzzer_Murata_PKM13EPYH4000-A0_D12.6mm_H6.9mm | LS701 |
| 1 | PMBT2907A | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q802 |
| 1 | Pink | irex_LED_SMD:LED_Kingbright_AA3528V_3.5x2.8mm_handsolder | D101 |
| 1 | SI8422 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U701 |
| 1 | STM32G030Kx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U702 |
| 1 | TL432LI | Package_TO_SOT_SMD:SOT-23 | U801 |
| 1 | V+ | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J301 |
Similar boards
- 6 layers228.6 × 228.6 mm
- 2 layers88.4 × 62 mm
EStopTX
ParadigmEngineering/igvc-2023-hardware
Intelligent Ground Vehicle Competition (Spring 2023) hardware for the Paradigm Engineering Student Group
13 parts1 - 2 layers47.2 × 115.3 mm
- 4 layers25.4 × 25.4 mm
Twonkie
dojoe/Twonkie
A USB-PD sniffer/injector/sink based on Google's Twinkie, re-designed to be manufactured by mere mortals.
62 parts415 - 2 layers94.8 × 67.2 mm
- 2 layers32.3 × 19.1 mm
ICM 20600 Breakout
PStinno/icm-20600-breakout-pcb
Breakout board for the ICM 20600 3-axis Accelerometer and Gyroscope.
22 parts1CC-BY-SA-4.0 - 2 layers25 × 20 mm
Mlx90614-stemmaqt
ChristianHirsch/mlx90614-stemmaqt
This board features the MLX90614 infrared thermometer with the Adafruit STEMMA QT connector interface.
21 parts
Questions
How big is the Breadboard DMM PCB?
It measures 89.3 × 90.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Breadboard DMM use?
152 parts, built around the LMV358, PDME1-S5-S5-S, NAU7802SGI and 74VHC4052AFT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Breadboard DMM KiCad files?
From the Acliad/toast-o-meter repository on GitHub, at the commit this page was made from: the board is Board Files/Breadboard_DMM/Breadboard_DMM.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Breadboard DMM design in my own project?
Its repository states no licence, so its author keeps all rights: ask Acliad before reusing the design.