
EpicSEPIC
spiwocoal/547452
Convertidor DC/DC topología SEPIC para ramo Taller de sistemas electrónicos

Convertidor DC/DC topología SEPIC para ramo Taller de sistemas electrónicos
SEPIC is an open-source printed circuit board by spiwocoal, from the spiwocoal/547452 repository on GitHub. It is a 2-layer board of 51 × 78.3 mm with 22 parts on 16 nets, routed with 19 tracks and 0 vias.
It is built around the HCPL-3120, IRF520NPBF and SR5200. Its parts include 6 capacitors, 4 connectors, 2 resistors, 1 IC and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22u | Capacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mm | C3, C5 |
| 2 | Screw Terminal | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J4 |
| 2 | Shunt | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P25.40mm_Horizontal | TP1, TP2 |
| 1 | 0.1u | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C6 |
| 1 | 10u | Capacitor_THT:C_Radial_D6.3mm_H7.0mm_P2.50mm | C4 |
| 1 | 2.2u | Capacitor_THT:C_Rect_L16.5mm_W8.7mm_P15.00mm_MKT | C2 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R1 |
| 1 | 22u | Capacitor_THT:C_Radial_D10.0mm_H20.0mm_P5.00mm | C1 |
| 1 | 2m | Inductor_THT:L_CommonMode_Toroid_Vertical_L24.0mm_W16.3mm_Px10.16mm_Py20.32mm_Murata_5200 | L1 |
| 1 | 6 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2 |
| 1 | Barrel Jack | Connector_BarrelJack:BarrelJack_Horizontal | J2 |
| 1 | HCPL-3120 | Package_DIP:DIP-8_W7.62mm_Socket | U1 |
| 1 | IRF520N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | Pin Header | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | SR5200 | Diode_THT:D_A-405_P7.62mm_Horizontal | D1 |
The 18 most common of 22 parts.

spiwocoal/547452
Convertidor DC/DC topología SEPIC para ramo Taller de sistemas electrónicos

ChengminLi/AI-PCB-layout
AI agent skill for designing and reviewing power-electronics PCBs, with a human review gate after every step



mwalsh161/pirled
Design goals: 1. A single ESP8266 governs up to 4 LEDs + 4 PIR sensors (+4 virtual signals). 2. Any LED can trigger on/off with any grouping of PIR sensors/virtual signals. - Note, logical OR with each other hard-coded.

ssyps2/PMSM_Motor_FOC
A three-level 3-phase Diode Clamped Inverter, applied as a battery connected Permanent Magnet Synchronous Machine (2kW) drive.

OxeBots/ssl_electronics
Oxebots electronics design for the RoboCup Soccer Small-Size League

rahmanaacc/CIRCUIT-PCB-BLDC-CONTROLLER-PARTITION-BOARD-MODULE-STM32f411-based
Design and development of a modular PCB partition board for a BLDC motor controller based on the STM32F411CEU6 microcontroller, integrating control, sensing, gate-driver, and interface circuitry into a structured…

It measures 51 × 78.3 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the HCPL-3120, IRF520NPBF and SR5200. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the spiwocoal/547452 repository on GitHub, at the commit this page was made from: the board is SEPIC/SEPIC.kicad_pcb and its schematic SEPIC/SEPIC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask spiwocoal before reusing the design.