Skip to the content
2 layers81.3 × 45.7 mmRefactored winner, the printed circuit board in 3D

Racing Timing Light with Remote Trigger.

Size
81.3 × 45.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
11
Pads
50
Tracks, vias
67, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 Jan 2026
Updated
12 Feb 2026

Overview

Refactored winner is an open-source printed circuit board by 3lkgrove, from the 3lkgrove/refactored-winner repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 81.3 × 45.7 mm with 22 parts on 11 nets, routed with 67 tracks and 0 vias.

It is built around the NE555P, BZX85C15-TAP and IRF4905, with the IRF520NPBF among its other parts. Its parts include 4 resistors, 4 connectors, 3 capacitors, 2 diodes and 2 transistors.

Main components

4

README

README.md

Race Timing Light with Remote Trigger

Schematic

PCB

Gerber Files

Gerber files can be found HERE.

Licensing

This project is licensed under the terms of the GNU General Public License v3.0 (GPL-3.0). The full text of the license can be found in the LICENSE file in the root directory of this repository.

Copyright (c) 2026 @3lkgrove

Parts

22
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_TopOnlyH1, H2, H3, H4
210kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R2
1100nfSamacSys_Parts:K104K15X7RF5UL2C3
11N4007Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1
1220Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR3
122ufCapacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mmC1
1435Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
147ufCapacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mmC2
1ACTIVATION SWITCHTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ2
1BZX85C15-TAPSamacSys_Parts:DIOAD1450W86L410D260Z1
1GREEN LIGHTTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ3
1IRF4905Package_TO_SOT_THT:TO-220-3_VerticalQ2
1IRF520NPackage_TO_SOT_THT:TO-220-3_VerticalQ1
1LED_SmallLED_THT:LED_D5.0mm_ClearD2
1LOGOLOGOG***
1NE555PPackage_DIP:DIP-8_W7.62mmU1
1POWER INTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ1
1RED LIGHTTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ4

Similar boards

  • 2 layers100 × 76 mmEmc flyback, the printed circuit board in 3D

    Emc flyback

    ChengminLi/AI-PCB-layout

    AI agent skill for designing and reviewing power-electronics PCBs, with a human review gate after every step

    90 parts31CC-BY-4.0
  • 2 layers87 × 33 mmBatmon, the printed circuit board in 3D

    Batmon

    pjaos/batmon

    A device to assist in extending the life of EBike batteries.

    58 parts1MIT
  • 2 layersPirled, the printed circuit board in 3D

    Pirled

    mwalsh161/pirled

    Design goals: 1. A single ESP8266 governs up to 4 LEDs + 4 PIR sensors (+4 virtual signals). 2. Any LED can trigger on/off with any grouping of PIR sensors/virtual signals. - Note, logical OR with each other hard-coded.

    8 parts
  • 2 layers51 × 78.3 mmSEPIC, the printed circuit board in 3D

    SEPIC

    spiwocoal/547452

    Convertidor DC/DC topología SEPIC para ramo Taller de sistemas electrónicos

    22 parts
  • 2 layers50 × 65 mmBuck converter, the printed circuit board in 3D

    Buck converter

    IslamHUFE/Buck-converter

    18 partsMIT
  • 2 layers316 × 119 mmTeensy Grovebox, the printed circuit board in 3D

    Teensy Grovebox

    jerry20091103/Teensy_Grovebox

    A portable synth and music multi-tool made with Teensy 4.1

    142 parts150MIT
  • 2 layers50.5 × 52 mmWellerRT Station projekt, the printed circuit board in 3D

    WellerRT Station projekt

    MarcelMG/DIY-Soldering-Station-Controller

    A soldering station controller compatible with Weller RT tips

    45 parts44MIT
  • 2 layers213.6 × 127.5 mmZuendbox v3 32, the printed circuit board in 3D

    Zuendbox v3 32

    fixxl/el-fueradoro

    Open source ignition-system for audio-fireworks

    205 parts10

Questions

How big is the Refactored winner PCB?

It measures 81.3 × 45.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Refactored winner use?

22 parts, built around the NE555P, BZX85C15-TAP, IRF4905 and IRF520NPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Refactored winner KiCad files?

From the 3lkgrove/refactored-winner repository on GitHub, at the commit this page was made from: the board is PCB/KiCAD/refactored-winner/refactored-winner.kicad_pcb and its schematic PCB/KiCAD/refactored-winner/refactored-winner.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Refactored winner design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).