Skip to the content
12345678

HCPL-3120

Broadcom LimitedExtended

-40℃~+100℃ 1 1.5V 3.75kV DIP-8 Logic Output Optoisolators

Part id
broadcom-limited/HCPL-3120
Category
Logic Output Optoisolators
Package
DIP-8
Pins
8
In stock
0 at JLCPCB (C17697706)
Used on
10 open-source boards

Overview

The HCPL-3120 is a logic Output Optoisolator made by Broadcom Limited in a DIP-8 package with 8 pins. -40℃~+100℃ 1 1.5V 3.75kV DIP-8 Logic Output Optoisolators.

PCBKit's library has its KiCad symbol (Driver_FET:HCPL-3120, from KiCad's library) and its footprint (Package_DIP:DIP-8_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C17697706). 10 open-source boards in 6 repositories on GitHub use it.

Symbol

235678
Driver_FET:HCPL-3120From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W7.62mmFrom KiCad's library

Pinout

8
The pins of the HCPL-3120
PinNameType
1NCNot connected
2APassive
3CPassive
4NCNot connected
5VEEPower out
6VOOutput
7VOOutput
8VCCPower in

Open-source boards using it

10See all 10
  • 4 layers294 × 143.9 mmPMSM Driver, the printed circuit board in 3D

    PMSM Driver

    ssyps2/PMSM_Motor_FOC

    A three-level 3-phase Diode Clamped Inverter, applied as a battery connected Permanent Magnet Synchronous Machine (2kW) drive.

    290 parts5
  • 2 layers114 × 135.2 mmKicker LT3751 OxeBots, the printed circuit board in 3D

    Kicker LT3751 OxeBots

    OxeBots/ssl_electronics

    Oxebots electronics design for the RoboCup Soccer Small-Size League

    126 partsGPL-3.0
  • 2 layers99.7 × 99.7 mmDRIVER and SWITCHING OPTIMIZATION CIRCUIT, the printed circuit board in 3D

    DRIVER and SWITCHING OPTIMIZATION CIRCUIT

    rahmanaacc/CIRCUIT-PCB-BLDC-CONTROLLER-PARTITION-BOARD-MODULE-STM32f411-based

    Design and development of a modular PCB partition board for a BLDC motor controller based on the STM32F411CEU6 microcontroller, integrating control, sensing, gate-driver, and interface circuitry into a structured…

    87 parts
  • 4 layers379.1 × 174.6 mmInverter Digi, the printed circuit board in 3D

    Inverter Digi

    SlenderN679/Inversor-trifasico-digital

    Projeto de um Inversor Trifásico com Controlo Digital assente num STM32H755. Implementa modulação SPWM a 25 kHz, controlo escalar V/f e um Retificador Monofásico Ativo (AFE) com fator de potência unitário.

    236 parts
  • 2 layers275.4 × 267.4 mmInverter-2026-01-21 171639, the printed circuit board in 3D

    Inverter-2026-01-21 171639

    SlenderN679/Inversor-trifasico-digital

    Projeto de um Inversor Trifásico com Controlo Digital assente num STM32H755. Implementa modulação SPWM a 25 kHz, controlo escalar V/f e um Retificador Monofásico Ativo (AFE) com fator de potência unitário.

    149 parts
  • 2 layers352 × 206.5 mmInverter Digi, the printed circuit board in 3D

    Inverter Digi

    SlenderN679/Inversor-trifasico-digital

    Projeto de um Inversor Trifásico com Controlo Digital assente num STM32H755. Implementa modulação SPWM a 25 kHz, controlo escalar V/f e um Retificador Monofásico Ativo (AFE) com fator de potência unitário.

    230 parts
  • 2 layers368.6 × 206.5 mmInverter Digi, the printed circuit board in 3D

    Inverter Digi

    SlenderN679/Inversor-trifasico-digital

    Projeto de um Inversor Trifásico com Controlo Digital assente num STM32H755. Implementa modulação SPWM a 25 kHz, controlo escalar V/f e um Retificador Monofásico Ativo (AFE) com fator de potência unitário.

    223 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the HCPL-3120?

Yes. The symbol is Driver_FET:HCPL-3120 and the footprint Package_DIP:DIP-8_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the HCPL-3120?

DIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the HCPL-3120 datasheet?

Broadcom Limited publishes it: the Datasheet link on this page opens it.

Where can I order the HCPL-3120?

JLCPCB lists it as part C17697706, with 0 in stock; the sellers' links on this page open their listings.

What can replace the HCPL-3120?

Parts like it in the library: the HCPL-3120-000E by Broadcom Limited, the HCPL-3120-500E by AVAGO, the HCPL-3120-560E by Broadcom Limited and the HCPL-3120-060E by Broadcom Limited. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the HCPL-3120?

10 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.