2 layers145.9 × 153.4 mm
2 layers52.5 × 77.1 mm
Main controller
sovanaram/Power-ElectronicsCreate and experiment power conversions
- Size
- 52.5 × 77.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 45
- Pads
- 130
- Tracks, vias
- 835, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Dec 2024
- Updated
- 8 Dec 2024
Overview
Main controller is an open-source printed circuit board by sovanaram, from the sovanaram/Power-Electronics repository on GitHub. It is a 2-layer board of 52.5 × 77.1 mm with 41 parts on 45 nets, routed with 835 tracks and 6 vias.
It is built around the 100UF 10V 4*7 and ZPY5V1-TR. Its parts include 25 connectors, 8 resistors, 2 capacitors and 2 diodes.
Main components
2README
README.mdIsolated Pure Sine Wave Single Phase Inverter using SPWM
this topic is about How to make Inverter by your self and These are the steps to makes it: 1, Researching theories of Inverter 2, Select Topology (DCDC Converter stage, Inverter stage) 3, Calculating DCDC Converter and Inverter 4, Calculating Transformer and Inductors of DCDC Converter 5, Design Transformer and Inductors 6, Design schematic and PCB 7, Installing Hardware 8, Select electronic switches(MOSFETs and DIODEs) 9, Select Controller 10, Programming and choose the types of Closed loop Control Methods, Filter 11, Testing Hardware
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | ~ | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J14, J15, J16, J17, J18, J24 |
| 4 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4, R5, R8 |
| 4 | ~ | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J8, J9, J21, J25 |
| 2 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7 |
| 2 | 3.3V | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J11, J23 |
| 2 | Conn_01x01 | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J19, J20 |
| 2 | IN | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J12, J13 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 100uF/10V | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C1 |
| 1 | 104 | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 5V Supply | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | Buzzer_5V | Buzzer_Beeper:MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | Current Sensor | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | Ferrite_Bead | Inductor_THT:L_Axial_L7.0mm_D3.3mm_P5.08mm_Vertical_Fastron_MICC | FB1 |
| 1 | GND | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | PWM | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | Shutdown | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | T | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J10 |
| 1 | UART | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J22 |
| 1 | UV | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | Voltage Sensor | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | ZPY5V1 | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | DZ1 |
| 1 | ~ | STM32_board:STM32F401RCT6_BOARD1 | STM32F401RCT6_BOARD2 |
Questions
How big is the Main controller PCB?
It measures 52.5 × 77.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Main controller use?
41 parts, built around the 100UF 10V 4*7 and ZPY5V1-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Main controller KiCad files?
From the sovanaram/Power-Electronics repository on GitHub, at the commit this page was made from: the board is Controller/Main controller.kicad_pcb and its schematic Controller/Main controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Main controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask sovanaram before reusing the design.
More from sovanaram/Power-Electronics
5- 2 layers236.1 × 126.2 mm
- 2 layers102.1 × 99.8 mm
- 2 layers112.8 × 83.1 mm
- 2 layers96.7 × 59.4 mm
Similar boards
- 4 layers95 × 76.2 mm
- 2 layers138.8 × 55 mm
MuxPi
SamsungSLAV/muxpi
MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices.
354 parts22Apache-2.0 - 4 layers58.5 × 85.5 mm
- 2 layers80 × 60 mm
EnvMonitor
kennySzhucheng/EnvMonitor
🌡️ 智能环境监测站 | STM32F103C8T6 + FreeRTOS + ESP8266 | 温湿度/光照/测距/OLED菜单/ThingSpeak上云 | 从裸机到RTOS到KiCad PCB全流程
27 parts10 - 2 layers125.7 × 97.8 mm
Qdisk v4
alvaroalea/QL_CST_FLoppyController
A clone of the CST's Floppy Disk Interface for Sinclair QL (PCB version 3 & 4)
31 parts8 - 4 layers130 × 90 mm
- 2 layers99.9 × 100 mm
- 2 layers127 × 71 mm
