

Inverter
Create and experiment power conversions
- Size
- 112.8 × 83.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 25
- Pads
- 136
- Tracks, vias
- 994, 24
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Dec 2024
- Updated
- 8 Dec 2024
Overview
Inverter is an open-source printed circuit board by sovanaram, from the sovanaram/Power-Electronics repository on GitHub. It is a 2-layer board of 112.8 × 83.1 mm with 53 parts on 25 nets, routed with 994 tracks and 24 vias.
It is built around the FGH40N60SFDTU, L7805 and L7812, with the MUR460, 220UF 10V 5*7 and 2N2222A among its other parts. Its parts include 15 resistors, 11 capacitors, 8 diodes, 7 connectors and 5 transistors. It belongs with the power boards of this library.
Main components
6FGH40N60SFDTU
TO-247-55℃~+150℃@(Tj) 1.13mJ 115ns 120nC 2.11nF 2.9V@40A,15V 200pF 25ns 290W 310uJ 45ns 4V@250uA 600V 60pF 80A FS (Field Stop) TO-247 IGBT Transistors / Modules ROHSonsemiIGBT Transistors / ModulesL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsL7812
TO-220ST0℃~+125℃@(Tj) 1 1.2A 12V 2V@(1A) 30V 71dB@(120Hz) 76uV Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMUR460
DO-201AD-55℃~+150℃ 1.7V@4A 4A 50ns 5uA@600V 600V DO-201AD Fast Recovery / High Efficiency Diodes ROHSMDDFast Recovery / High Efficiency Diodes220UF 10V 5*7
插件,5x7mm1000hrs@105℃ 10V 220uF 2mm 5mm 7mm 插件,5x7mm Aluminum Electrolytic Capacitors - Leaded ROHSLCSCAluminum Electrolytic Capacitors - Leaded2N2222A
TO-92-55℃~+150℃ 1 NPN 100MHz 100nA 400 40V 5V 600mA 600mV 625mW NPN TO-92 Bipolar (BJT) ROHSSlkorBipolar (BJT)
README
README.mdIsolated Pure Sine Wave Single Phase Inverter using SPWM
this topic is about How to make Inverter by your self and These are the steps to makes it: 1, Researching theories of Inverter 2, Select Topology (DCDC Converter stage, Inverter stage) 3, Calculating DCDC Converter and Inverter 4, Calculating Transformer and Inductors of DCDC Converter 5, Design Transformer and Inductors 6, Design schematic and PCB 7, Installing Hardware 8, Select electronic switches(MOSFETs and DIODEs) 9, Select Controller 10, Programming and choose the types of Closed loop Control Methods, Filter 11, Testing Hardware
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R12 |
| 4 | 1N4148 | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 4 | 4.7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R7, R8 |
| 4 | FGH40N60SFD | Package_TO_SOT_THT:TO-247-3_Vertical | Q1, Q2, Q3, Q4 |
| 4 | MUR460 | PCM_Diode_THT_AKL:D_DO-201AD_P12.70mm_Horizontal | D5, D6, D7, D8 |
| 3 | 0.1u/275V | Capacitor_THT:C_Rect_L13.5mm_W5.0mm_P10.00mm_FKS3_FKP3_MKS4 | C9, C10, C11 |
| 3 | 104 | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C7, C8 |
| 2 | 0.4 | r_shunt:shun_L10mm | R11, R11 |
| 2 | 100K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R10, R14 |
| 1 | 100uF/25V | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C5 |
| 1 | 103 | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 10K | PCM_SL_Devices:Potentiometer_RM065 | RV1 |
| 1 | 2.2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16 |
| 1 | 220uF/10V | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | 225/400V | Capacitor_THT:C_Rect_L24.0mm_W7.0mm_P22.50mm_MKT | C1 |
| 1 | 2N2222A | Package_TO_SOT_THT:TO-92_Inline_Wide | Q6 |
| 1 | 3.3mH | Inductor_THT:L_Toroid_Vertical_L28.6mm_W14.3mm_P11.43mm_Bourns_5700 | L1 |
| 1 | 330uF/35V | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C6 |
| 1 | BZD23-C5V1 | PCM_Diode_THT_AKL:D_DO-41_SOD81_P10.16mm_Horizontal_Zener | DZ1 |
| 1 | EGS002 | Connector_PinSocket_2.54mm:PinSocket_1x17_P2.54mm_Vertical | J1 |
| 1 | FAN | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | Filter_EMI_LL | Inductor_THT:Choke_Schaffner_RN102-04-14.0x14.0mm | FL1 |
| 1 | GND | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_360381_1x01_Horizontal_ScrewM3.0 | J7 |
| 1 | Heatsink_Pad_3Pin | Heat sink create:heatsink | HS1 |
| 1 | L | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_360381_1x01_Horizontal_ScrewM3.0 | J4 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | L7812 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | N | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_360381_1x01_Horizontal_ScrewM3.0 | J5 |
| 1 | NTC/10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R17 |
| 1 | VDD | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_360381_1x01_Horizontal_ScrewM3.0 | J6 |
| 1 | Vin | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J3 |
More from sovanaram/Power-Electronics
5- 2 layers145.9 × 153.4 mm

- 2 layers236.1 × 126.2 mm

- 2 layers102.1 × 99.8 mm

- 2 layers96.7 × 59.4 mm

- 2 layers52.5 × 77.1 mm

Similar boards
- 2 layers100 × 70 mm

MotorDriver
JeyRunner/actonator
3D printable robot actuator with belt-driven gearbox and custom FOC driver board.
177 parts10MIT - 2 layers63.8 × 95.8 mm

- 2 layers65 × 56 mm

- 4 layers82.8 × 56.4 mm

- 2 layers110.5 × 63.5 mm

Resp2
BreathOfHope/Respirator-2
Respirator-2 takes the knowledge we gained in building the RespiratorApparatus to build a production ready version, that can be manufactured in an industrial setting.
84 parts - 2 layers

Eletroporador
hoffmannpablorodrigo/electroporator-esope
Electroporator hardware with esope protocol
50 parts - 2 layers180 × 133.3 mm

- 2 layers

Questions
How big is the Inverter PCB?
It measures 112.8 × 83.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Inverter use?
53 parts, built around the FGH40N60SFDTU, L7805, L7812 and MUR460. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Inverter KiCad files?
From the sovanaram/Power-Electronics repository on GitHub, at the commit this page was made from: the board is Inverter Board/Inverter/Inverter.kicad_pcb and its schematic Controller/Main controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Inverter design in my own project?
Its repository states no licence, so its author keeps all rights: ask sovanaram before reusing the design.