
Moba block stelle
hpbock/moba-bockstelle
Ein Blockstellenmodul für analoge Modellbahnen zur Ansteuerung von Lichtsignalen, Zugbeeinflussung und Belegtmeldung für Loconet-T.

Electroporator hardware with esope protocol
Eletroporador is an open-source printed circuit board by hoffmannpablorodrigo, from the hoffmannpablorodrigo/electroporator-esope repository on GitHub. It is a 2-layer board with 50 parts on 35 nets.
It is built around the IRG4PH50KDPBF, GBU4A and MUR4100, with the MUR460 among its other parts. Its parts include 12 connectors, 8 diodes, 5 resistors, 3 ICs and 2 capacitors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x01_Pin | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J5, J6, J7, J8, J9, J10 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_DIN965_Pad | H1, H2, H3, H4, H5, H6 |
| 4 | 330k | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | REl1, REl2, REl3, REl4 |
| 4 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4 |
| 3 | Conn_01x02 | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J1, J3, J4 |
| 2 | 0.1uF | Capacitor_THT:C_Disc_D8.0mm_W5.0mm_P7.50mm | C2, C3 |
| 2 | 180 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | RPulse1, RPulse2 |
| 2 | Conn_01x01 | Connector_Wire:SolderWirePad_1x01_SMD_3x6mm | J8, J9 |
| 1 | 1.8k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R5 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | RG1 |
| 1 | 10 | Resistor_THT:R_Axial_Power_L50.0mm_W9.0mm_P55.88mm | RPot1 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R4 |
| 1 | 180pF | Capacitor_THT:C_Disc_D8.0mm_W5.0mm_P7.50mm | CBlank1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | 1nF | Capacitor_THT:C_Disc_D8.0mm_W5.0mm_P7.50mm | CS1 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2 |
| 1 | 47 | Resistor_THT:R_Axial_Power_L50.0mm_W9.0mm_P55.88mm | RPot2 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | Rpulldown1 |
| 1 | Conn_01x03 | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_02x08_Counter_Clockwise | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | ACPL-333J1 |
| 1 | GBU4A | Diode_THT:Diode_Bridge_Vishay_KBU | D5 |
| 1 | IRG4PH50KD | Package_TO_SOT_THT:TO-247-3_Vertical | Q1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | LM7818_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | MUR4100 | MUR4100ERLG_footprint:DIOAD1950W125L950D560 | D8 |
| 1 | MUR460 | MUR460_footprint:DIOAD1990W125L900D530 | D6 |
| 1 | Ska 1/17 | Diode_THT:D_DO-201AE_P12.70mm_Horizontal | D7 |
| 1 | TMA-0512D | Converter_DCDC:Converter_DCDC_TRACO_TMA-05xxD_12xxD_Dual_THT | U1 |

hpbock/moba-bockstelle
Ein Blockstellenmodul für analoge Modellbahnen zur Ansteuerung von Lichtsignalen, Zugbeeinflussung und Belegtmeldung für Loconet-T.

mstolpner/lt4320-bridge-drop-in
A rectifier bridge drop in replacement pcb based on LT4320 ideal rectifier

/1.1/OpampPower.kicad_pcb.jpg?size=s&soon)

JeyRunner/actonator
3D printable robot actuator with belt-driven gearbox and custom FOC driver board.

BreathOfHope/Respirator-2
Respirator-2 takes the knowledge we gained in building the RespiratorApparatus to build a production ready version, that can be manufactured in an industrial setting.


50 parts, built around the IRG4PH50KDPBF, GBU4A, MUR4100 and MUR460. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hoffmannpablorodrigo/electroporator-esope repository on GitHub, at the commit this page was made from: the board is Eletroporador.kicad_pcb and its schematic Electroporator_schematic/Electroporator_circuit_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hoffmannpablorodrigo before reusing the design.