Skip to the content
6 layers225.9 × 200 mmController Unit V1.0, the printed circuit board in 3D

Controller Unit V1.0

SonJonsr/Custom-8bit-CPU2
Size
225.9 × 200 mm
Copper layers
6
Thickness
1.6 mm
Parts
1,282
Nets
674
Pads
3,324
Tracks, vias
7,787, 911
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
20 Jan 2026
Updated
25 Jun 2026

Overview

Controller Unit V1.0 is an open-source printed circuit board by SonJonsr, from the SonJonsr/Custom-8bit-CPU repository on GitHub. It is a 6-layer board of 225.9 × 200 mm with 1,282 parts on 674 nets, routed with 7,787 tracks and 911 vias.

Its parts include 629 transistors, 489 resistors, 81 diodes, 20 capacitors and 14 connectors.

README

README.md

"# Custom-8bit-CPU" "# Custom-8bit-CPU"

Parts

1,282
QtyValueFootprintReferences
6292N7002Package_TO_SOT_SMD:SOT-23Q1, Q10, Q11, Q100, Q101, Q102, Q103, Q104, Q105, Q106, Q107, Q108, Q109, Q110, Q111, Q112 +613
47910kΩPCM_JLCPCB:R_0402R1, R10, R11, R100, R101, R102, R103, R104, R105, R106, R107, R108, R109, R110, R111, R112 +463
81RedPCM_JLCPCB:D_0603D1, D2, D10, D11, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26 +65
24MountingHoleMountingHole:MountingHole_2.2mm_M2H2, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24 +8
1622uFPCM_JLCPCB:C_0805C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18
15, , , , , , , , , , , , , ,
10RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR20, R21, R22, R74, R76, R77, R388, R389, R410, R411
9MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H25, H26, H27, H28, H29, H30, H31, H32
6Conn_01x21_SocketConnector_PinHeader_2.54mm:PinHeader_1x21_P2.54mm_VerticalJ1, J2, J3, J4, J5, J6
5Conn_02x08_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_VerticalJ10, J11, J12, J13, J14
3Conn_01x01_PinConnector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_VerticalJ7, J8, J9
2CCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC1, C2
2CCapacitor_THT:C_Radial_D16.0mm_H25.0mm_P7.50mmC19, C20
1LOGOHVL_L:HVL_LOGO_15mmG***

More from SonJonsr/Custom-8bit-CPU

12

Similar boards

  • 6 layers254 × 130 mmQuartz, the printed circuit board in 3D

    Quartz

    osprey-dcs/Quartz

    Quartz ADC PCB OSH repository

    1,244 parts
  • 6 layers497.4 × 154.7 mmFCSTMV1.05, the printed circuit board in 3D

    FCSTMV1.05

    CGainsWorks/emb-drone-flight-stack

    Open-source quadrotor flight stack: custom KiCad flight-controller and power distribution boards plus C++ firmware with a PID attitude loop, written from scratch.

    1,198 partsMIT
  • 6 layers172.5 × 144 mmOsc jack left, the printed circuit board in 3D

    Osc jack left

    Takazudo/zudo-osc-hole-field

    This directory retains the rejected #38 nine-board-era schematic, PCB and route receipts at base commit 1fc6e5347308fe5e8166d5828ba3ba6fa8e101c7. It is excluded from the current ten-board manifest.

    1,108 parts
  • 6 layers195.1 × 202.2 mmCellsim-16ch, the printed circuit board in 3D

    Cellsim-16ch

    atopile/hil

    Hardware-In-the-Loop (HiL ⛰️) for high-quality validation 🧪 everywhere 🚀

    1,464 parts29MIT
  • 6 layers201.5 × 139.2 mmGc3 panelized, the printed circuit board in 3D

    Gc3 panelized

    masahirosuzuka/GC3

    1,528 parts
  • 6 layers122.5 × 103.5 mmThunderscope Rev5.3, the printed circuit board in 3D

    Thunderscope Rev5.3

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    1,022 parts1.3kMIT
  • 6 layers100.3 × 68.6 mmMYRIAD RD 5.1.2.unrouted, the printed circuit board in 3D

    MYRIAD RD 5.1.2.unrouted

    aspdac-submission-pcb-layout/PCB-Layout-Framework

    This repository has been prepared from the original. Some care has been taken to remove the names of the authors.

    984 parts7BSD-3-Clause

Questions

How big is the Controller Unit V1.0 PCB?

It measures 225.9 × 200 mm and has 6 copper layers, 1.6 mm thick.

What parts does the Controller Unit V1.0 use?

1,282 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Controller Unit V1.0 KiCad files?

From the SonJonsr/Custom-8bit-CPU repository on GitHub, at the commit this page was made from: the board is PCB_S/Controller_Unit_V1.0/Controller_Unit_V1.0.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Controller Unit V1.0 design in my own project?

Its repository states no licence, so its author keeps all rights: ask SonJonsr before reusing the design.