2 layers80 × 60 mm
EnvMonitor
kennySzhucheng/EnvMonitor
🌡️ 智能环境监测站 | STM32F103C8T6 + FreeRTOS + ESP8266 | 温湿度/光照/测距/OLED菜单/ThingSpeak上云 | 从裸机到RTOS到KiCad PCB全流程
27 parts10
2 layers
4sensorSetUp
Smartpark-sddec24/HardwareThis is a repository for the code of a senior design Arduino prototype
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 41
- Pads
- 86
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Oct 2024
- Updated
- 12 Dec 2024
Overview
4sensorSetUp is an open-source printed circuit board by Smartpark-sddec24, from the Smartpark-sddec24/Hardware repository on GitHub. It is a 2-layer board with 21 parts on 41 nets.
It is built around the HC-SR04. Its parts include 12 resistors, 4 ICs and 4 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 220 | 3-1676480-4:RESC1005X35N_3-1676480-4 | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 4 | HC-SR04 | HC-SR04:XCVR_HC-SR04 | U1, U2, U3, U4 |
| 4 | KPS-5130 | OptoDevice:Kingbright_KPS-5130 | D1, D2, D3, D5 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A2 |
Questions
What parts does the 4sensorSetUp use?
21 parts, built around the HC-SR04. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 4sensorSetUp KiCad files?
From the Smartpark-sddec24/Hardware repository on GitHub, at the commit this page was made from: the board is 4sensorSetUp/4sensorSetUp.kicad_pcb and its schematic 4sensorSetUp/4sensorSetUp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 4sensorSetUp design in my own project?
Its repository states no licence, so its author keeps all rights: ask Smartpark-sddec24 before reusing the design.
Similar boards
- 2 layers120.7 × 184.1 mm
- 2 layers110 × 80 mm
Noko 2
NikolaiRadke/Noko_2
The do-it-yourself Arduino-based Noko monster. Version 2 with PCB and 3D printed casing.
51 parts3Apache-2.0 - 2 layers150 × 100 mm
Maze kiCad
billtsol/Maze
This project demonstrates how to use an Arduino board, IR sensors, and a motor driver shield to create a maze-solving robot.
39 parts2 - 2 layers111.5 × 102 mm
Wall e
c-lydia/ESP-ROS2
A tiny robot with IMU (MPU5060) and an ultrasonic sensor (HC-SR04), running on micro-ROS, communicating over UDP.
12 parts2Apache-2.0 - 2 layers25.2 × 27.3 mm
Cf2-hcsr04
dbrgn/crazyflie2-hcsr04
Ultrasonic sensor (HC-SR04) extension board for the Crazyflie 2.0
9 parts2 - 2 layers
Aegis
YousefAliAicha/aegis-embedded-system
Networked rotating ultrasonic radar system built on the Deneyap Kart 1A (ESP32-S3), with a real-time web dashboard served directly from the board.
9 parts2MIT - 2 layers170.2 × 119.4 mm
Sentinel
YousefAliAicha/sentinel-arduino-firmware
Adaptive traffic-light FSM on the Arduino UNO R3 — pedestrian preemption, LDR-gated night mode with HC-SR04 vehicle detection, and a multiplexed 7-segment countdown. Fully non-blocking.
25 parts2MIT