Skip to the content
2 layers97.9 × 150.9 mmPB SAO, the printed circuit board in 3D

SAO PCB Badge for the 2022 Linux Conference Aus

Size
97.9 × 150.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
24
Nets
11
Pads
50
Tracks, vias
120, 1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
11 Sep 2021
Updated
9 Nov 2021

Overview

PB SAO is an open-source printed circuit board by sjpiper145, from the sjpiper145/PartybuttonSAO repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 97.9 × 150.9 mm with 24 parts on 11 nets, routed with 120 tracks and 1 via.

It is built around the CR2032. Its parts include 8 diodes, 2 transistors, 2 connectors and 2 switches.

Main components

1

README

README.md

PartybuttonSAO

SAO PCB Badge for the 2022 Linux Conference Aus

Parts

24
QtyValueFootprintReferences
4LEDLED_THT:LED_D3.0mmD5, D6, D7, D8
4LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1, D2, D3, D4
3LOGOF.Mask_g842G***, G***, G***
2SAO_FConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ1, J2
110K SparkFun-Resistors:1210>NAME
12N7002Package_TO_SOT_SMD:SOT-23_HandsolderingQ1
12N7002Package_TO_SOT_THT:TO-92Q2
1>VALUESparkFun-Resistors:1_6W-RES>NAME
1CR2032Battery:BatteryHolder_Keystone_3034_1x20mmBT1
1LOGOF.Cu_g824G***
1LOGOF.SilkS_g838G***
1LOGOadafruit:TapeBattHolderG***
1MountingHoleMountingHole:MountingHole_3mmH1
1SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW2
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW1

Similar boards

  • 2 layers333.4 × 149.9 mmOmega Mainboard, the printed circuit board in 3D

    Omega Mainboard

    skiselev/omega

    Omega Home Computer

    248 parts459GPL-3.0
  • 2 layers17.2 × 30.4 mmWeigand, the printed circuit board in 3D

    Weigand

    linklayer/BLEKey

    A Bluetooth Low Energy device for interfacing with Wiegand

    17 parts268
  • 4 layers188 × 188 mmITX Llama, the printed circuit board in 3D

    ITX Llama

    eivindbohler/itxllama

    422 parts246GPL-3.0
  • 2 layers61 × 36.8 mmKeebcard, the printed circuit board in 3D

    Keebcard

    rsheldiii/Keebcard

    Home of the KeebCard project - Kicad files, code, and more!

    15 parts112
  • 2 layers59.2 × 41 mmBluey, the printed circuit board in 3D

    Bluey

    electronut/ElectronutLabs-bluey

    Nordic nRF52832 BLE development board with sensors.

    79 parts96
  • 2 layers35 × 35 mmQron0b, the printed circuit board in 3D

    Qron0b

    qewer33/qron0b

    a sleek and low-power binary wristwatch

    35 parts62GPL-3.0
  • 2 layers90 × 89.4 mm38-04-usb sleuth, the printed circuit board in 3D

    38-04-usb sleuth

    smaroukis/usb-sleuth

    USB cable continuity tester ++

    68 parts61
  • 2 layers170.2 × 100 mmZ80-SBC, the printed circuit board in 3D

    Z80-SBC

    skiselev/zeta_sbc

    Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware

    75 parts53GPL-3.0

Questions

How big is the PB SAO PCB?

It measures 97.9 × 150.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PB SAO use?

24 parts, built around the CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PB SAO KiCad files?

From the sjpiper145/PartybuttonSAO repository on GitHub, at the commit this page was made from: the board is PB SAO.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the PB SAO design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).