

ITX Llama
- Size
- 188 × 188 mm
- Copper layers
- 4
- Thickness
- 1.62 mm
- Parts
- 422
- Nets
- 556
- Pads
- 1,953
- Tracks, vias
- 4,659, 558
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Dec 2023
- Updated
- 30 May 2025
Overview
ITX Llama is an open-source printed circuit board by eivindbohler, from the eivindbohler/itxllama repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 188 × 188 mm with 422 parts on 556 nets, routed with 4,659 tracks and 558 vias.
It is built around the GD75232N, AP7165-SPG and CR2032. Its parts include 190 capacitors, 123 resistors, 20 connectors, 11 transistors and 7 ICs. It belongs with the ESP8266 and 8051 (CH55x, STC, AT89) boards of this library.
Main components
3GD75232N
PDIP-200℃~+70℃ 120Kbps 3 5 5V、7.5V~15V Transceiver PDIP-20 RS232 ICs ROHSTexas InstrumentsRS232 ICsAP7165-SPG
SO-8-EP-40℃~+85℃@(Ta) 1 170uA 400mV@(500mA) 5.5V 600mA 60dB@(1kHz) 800mV~5V Adjustable PG Pin、Over Current Protection、Enable、Short Circuit Protection、Thermal Shutdown Positive SO-8-EP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCR2032
-- Unclassified goods ROHSMaxellUncategorised
README
kicad/README.mdNotice:
This folder contains all files necessary to produce the ITX-Llama board from JLCPCB, or to continue development of the board.
However, I don't give any guarantees that everything is correct and working; you need to have a good understanding of Kicad and the PCB/assembly ordering process - and check everything yourself.
Parts
422| Qty | Value | Footprint | References |
|---|---|---|---|
| 95 | 0.1uF | llama_shared:C_0402_1005Metric | C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113, C114, C115 +79 |
| 25 | 5.1k | llama_shared:R_0402_1005Metric | R23, R26, R29, R30, R31, R32, R33, R34, R35, R36, R37, R38, R41, R46, R108, R121 +9 |
| 24 | 47uF | llama_shared:C_0603_1608Metric | C10, C11, C27, C31, C32, C43, C44, C45, C159, C161, C167, C168, C169, C170, C171, C173 +8 |
| 18 | 10uF | llama_shared:C_0603_1608Metric | C33, C34, C52, C69, C74, C134, C137, C143, C147, C148, C149, C158, C172, C174, C175, C176 +2 |
| 16 | 10k | llama_shared:R_0402_1005Metric | R13, R20, R42, R57, R81, R82, R87, R88, R97, R100, R102, R110, R111, R112, R115, R120 |
| 15 | 1uF | llama_shared:C_0402_1005Metric | C15, C24, C28, C65, C66, C67, C78, C121, C132, C135, C150, C151, C152, C177, C178 |
| 12 | 4.7k | llama_shared:R_0402_1005Metric | R15, R16, R28, R62, R66, R67, R84, R85, R86, R89, R90, R91 |
| 9 | 47k | llama_shared:R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R27, R60, R61 |
| 8 | 33 | llama_shared:R_0402_1005Metric | R7, R8, R9, R11, R12, R40, R53, R118 |
| 8 | 6.8k | llama_shared:R_0402_1005Metric | R21, R22, R24, R25, R103, R104, R105, R106 |
| 7 | F | Fuse:Fuse_0603_1608Metric | F1, F2, F3, F4, F5, F6, F7 |
| 7 | NPN | llama_shared:Q_BJT_SOT-23-3 | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 6 | 1k | llama_shared:R_0402_1005Metric | R43, R44, R55, R58, R78, R119 |
| 6 | 1nF | llama_shared:C_0402_1005Metric | C19, C23, C35, C36, C125, C126 |
| 4 | 100uF | llama_shared:C_1210_3225Metric | C1, C2, C3, C4 |
| 4 | 27 | llama_shared:R_0402_1005Metric | R45, R56, R122, R123 |
| 4 | 330 | llama_shared:R_0402_1005Metric | R18, R74, R75, R116 |
| 4 | 470 | llama_shared:R_0805_2012Metric | R59, R94, R95, R96 |
| 4 | 470pF | llama_shared:C_0402_1005Metric | C79, C133, C136, C157 |
| 4 | 49.9 | llama_shared:R_0402_1005Metric | R70, R71, R72, R73 |
| 4 | 70Ω@100MHz | llama_shared:R_0603_1608Metric | FB4, FB5, FB6, FB7 |
| 4 | 75 | llama_shared:R_0402_1005Metric | R68, R69, R76, R77 |
| 4 | H_HOLE | llama_shared:H_ATX_PERF | H1, H2, H3, H4 |
| 4 | L_EMI_FILTER | llama_shared:L_EMI_FILTER_MCM2012B900GBE | L1, L2, L3, L4 |
| 4 | Q_NMOS_GDS | llama_shared:Q_NFET_ENH_SOT-23-3 | Q8, Q9, Q10, Q11 |
| 4 | U_MIC5219-3.3YM5 | llama_shared:U_SOT-23-5 | U8, U10, U13, U14 |
| 3 | 10nF | llama_shared:C_0402_1005Metric | C55, C64, C160 |
| 3 | 1N4148 | Diode_SMD:D_SOD-323F | D2, D3, D4 |
| 3 | 330pF | llama_shared:C_0402_1005Metric | C48, C49, C50 |
| 3 | 4.7uF | llama_shared:C_0603_1608Metric | C88, C154, C155 |
| 3 | 470 | llama_shared:R_0402_1005Metric | R14, R98, R101 |
| 2 | 0.33uF | llama_shared:C_0402_1005Metric | C70, C71 |
| 2 | 2.2k | llama_shared:R_0402_1005Metric | R92, R93 |
| 2 | 2.2nF | llama_shared:C_0402_1005Metric | C141, C142 |
| 2 | 2.2uF | llama_shared:C_0603_1608Metric | C139, C140 |
| 2 | 2.7nF | llama_shared:C_0603_1608Metric | C30, C68 |
| 2 | 200 | llama_shared:R_0402_1005Metric | R39, R117 |
| 2 | 22pF | llama_shared:C_0402_1005Metric | C20, C21 |
| 2 | 2k | llama_shared:R_0402_1005Metric | R19, R64 |
| 2 | 3.4k | llama_shared:R_0402_1005Metric | R83, R107 |
| 2 | 30pF | llama_shared:C_0402_1005Metric | C180, C181 |
| 2 | 5.6nF | llama_shared:C_0402_1005Metric | C127, C128 |
| 2 | 600 | llama_shared:R_0402_1005Metric | R17, R63 |
| 2 | 600Ω@100MHz | llama_shared:R_0402_1005Metric | FB1, FB2 |
| 2 | SPEAKER | llama_shared:SP | SP1, SP2 |
| 1 | 0 | llama_shared:R_0402_1005Metric | R10 |
| 1 | 1.43k | llama_shared:R_0402_1005Metric | R65 |
| 1 | 12MHz | llama_shared:X_SMD3225 | X2 |
| 1 | 15.8k | llama_shared:R_0402_1005Metric | R113 |
| 1 | 16.9344MHz | llama_shared:X_Crystal_SMD_HC49S-MINI | X1 |
| 1 | 1nF | llama_shared:C_1812_4532Metric | C80 |
| 1 | 20k | llama_shared:R_0402_1005Metric | R99 |
| 1 | 22 | llama_shared:R_0402_1005Metric | R109 |
| 1 | 36k | llama_shared:R_0402_1005Metric | R114 |
| 1 | 50Ω@100MHz | llama_shared:R_1206_3216Metric | FB3 |
| 1 | AGP_3.3V | llama_shared:J_TE_5145263-3 | J5 |
| 1 | AP7165 | llama_shared:U_Diodes_SO-8EP | U7 |
| 1 | ATX_POWER | llama_shared:J_ATX_5.5mm | J1 |
| 1 | AUDIO | llama_shared:J_AUDIO_ABA-JAK-027-K24 | J14 |
| 1 | CD_IN | llama_shared:J_CONN_CD_AUDIO | J34 |
| 1 | CH559_PRG | llama_shared:SW_B3FS-1010 | SW3 |
| 1 | CLICK_VOL | llama_shared:P_CONN_SPKR_VOL | J6 |
| 1 | COM1 | llama_shared:J_DE9M | J8 |
| 1 | COM2_TTL | llama_shared:P_CONN_01X03 | J28 |
| 1 | CR2032 | llama_shared:BT_BS-02-A1AJ006 | BT1 |
| 1 | D1_MINI | llama_shared:J_WEMOS_D1_MINI | J35 |
| 1 | EMC2303 | llama_shared:U_EMC2303 | U11 |
| 1 | ESP_POWER | llama_shared:P_CONN_01X02 | J36 |
| 1 | EXT_SYNTH | llama_shared:J_CONN_02X10 | J41 |
| 1 | FAN1 | llama_shared:J_MOLEX_47053-1000 | J20 |
| 1 | FAN1_VDD | llama_shared:P_CONN_01X03 | J31 |
| 1 | FAN2 | llama_shared:J_MOLEX_47053-1000 | J21 |
| 1 | FAN2_VDD | llama_shared:P_CONN_01X03 | J32 |
| 1 | FAN3 | llama_shared:J_MOLEX_47053-1000 | J30 |
| 1 | FAN3_VDD | llama_shared:P_CONN_01X03 | J33 |
| 1 | FRONT_PANEL | llama_shared:P_CONN_PANEL | J3 |
| 1 | GAMEPORT | llama_shared:J_DA15 | J22 |
| 1 | GD75232 | llama_shared:U_TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | HID_POWER | llama_shared:P_CONN_01X02 | J19 |
| 1 | I2C | llama_shared:P_CONN_01X04_NO_3D | J43 |
The 382 most common of 422 parts.
More from eivindbohler/itxllama
1- 4 layers100 × 90 mm

Similar boards
- 2 layers123.3 × 95 mm

- 2 layers125 × 98 mm

3-in-1
mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos
44 parts258 - 2 layers139.7 × 101.6 mm

Isa monster fdc
skiselev/monster-fdc
ISA floppy disk controller card that supports up to 8 floppy drives
57 parts78 - 2 layers104.1 × 102.9 mm

ISA QuadUART
hkzlab/ISA_QuadUART2
This 8-bit ISA board will provide 4 serial RS232 ports using a single 16C554 controller. 2 ports are exposed on an external bracket and 2 are on internal headers.
42 parts9CC-BY-SA-4.0 - 2 layers104.1 × 102.9 mm

- 4 layers101.6 × 101.6 mm

- 2 layers333.4 × 149.9 mm

- 2 layers17.2 × 30.4 mm

Questions
How big is the ITX Llama PCB?
It measures 188 × 188 mm and has 4 copper layers, 1.62 mm thick.
What parts does the ITX Llama use?
422 parts, built around the GD75232N, AP7165-SPG and CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ITX Llama KiCad files?
From the eivindbohler/itxllama repository on GitHub, at the commit this page was made from: the board is kicad/ITX-Llama.kicad_pcb and its schematic kicad/ITX-Llama.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ITX Llama design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).