

SAO PCB Badge for the 2022 Linux Conference Aus
- Size
- 97.9 × 150.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 11
- Pads
- 50
- Tracks, vias
- 120, 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Sep 2021
- Updated
- 9 Nov 2021
Overview
PB SAO is an open-source printed circuit board by sjpiper145, from the sjpiper145/PartybuttonSAO repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 97.9 × 150.9 mm with 24 parts on 11 nets, routed with 120 tracks and 1 via.
It is built around the CR2032. Its parts include 8 diodes, 2 transistors, 2 connectors and 2 switches.
Main components
1README
README.mdPartybuttonSAO
SAO PCB Badge for the 2022 Linux Conference Aus
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | LED | LED_THT:LED_D3.0mm | D5, D6, D7, D8 |
| 4 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4 |
| 3 | LOGO | F.Mask_g842 | G***, G***, G*** |
| 2 | SAO_F | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1, J2 |
| 1 | 10K | SparkFun-Resistors:1210 | >NAME |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | 2N7002 | Package_TO_SOT_THT:TO-92 | Q2 |
| 1 | >VALUE | SparkFun-Resistors:1_6W-RES | >NAME |
| 1 | CR2032 | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | LOGO | F.Cu_g824 | G*** |
| 1 | LOGO | F.SilkS_g838 | G*** |
| 1 | LOGO | adafruit:TapeBattHolder | G*** |
| 1 | MountingHole | MountingHole:MountingHole_3mm | H1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Similar boards
- 2 layers333.4 × 149.9 mm

- 2 layers17.2 × 30.4 mm

- 4 layers188 × 188 mm

- 2 layers61 × 36.8 mm

- 2 layers59.2 × 41 mm

- 2 layers35 × 35 mm

- 2 layers90 × 89.4 mm

- 2 layers170.2 × 100 mm

Z80-SBC
skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware
75 parts53GPL-3.0
Questions
How big is the PB SAO PCB?
It measures 97.9 × 150.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PB SAO use?
24 parts, built around the CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PB SAO KiCad files?
From the sjpiper145/PartybuttonSAO repository on GitHub, at the commit this page was made from: the board is PB SAO.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PB SAO design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).