

MY POWERFULL PLC PCB
- Size
- 230 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 115
- Nets
- 113
- Pads
- 325
- Tracks, vias
- 313, 40
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 6 Apr 2026
- Updated
- 6 Apr 2026
Overview
MY POWERFULL PLC PCB is an open-source printed circuit board by siyovushdev, from the siyovushdev/MY_POWERFULL_PLC_PCB repository on GitHub. It is a 2-layer board of 230 × 90 mm with 115 parts on 113 nets, routed with 313 tracks and 40 vias.
It is built around the LTV-357T, AP7361C-33E and SMBJ33A, with the SS34 among its other parts. Its parts include 42 resistors, 18 ICs, 17 diodes, 12 capacitors and 9 transistors.
Main components
4LTV-357T
SOP-4-2.54mm-55℃~+110℃ 1.2V 200mV 3.75kV 35V 3us 4us 50% 50mA 50mA 600% 6V DC SOP-4-2.54mm Transistor, Photovoltaic Output Optoisolators ROHSLite-OnPre-Ordered ProductsAP7361C-33E
SOT-223-40℃~+85℃@(Ta) 1 1A 3.3V 340mV@(1A) 6V 75dB@(1kHz) 80uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSMBJ33A
DO-214AA(SMB)-55℃~+150℃ 11.26A@10/1000us 33V 40.6V 53.3V 5uA 600W@10/1000us IEC 61000-4-2 TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
115| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 4.7k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R10, R11, R12, R13, R14, R15, R16, R17, R20, R23, R26, R29, R32 +8 |
| 16 | LTV-357T | Package_SO:SO-4_4.4x3.6mm_P2.54mm | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14, U15, U16 |
| 10 | 100k | Resistor_SMD:R_1206_3216Metric | R19, R22, R25, R28, R31, R34, R37, R40, R41, R42 |
| 9 | SMBJ33A | Diode_SMD:D_SMB | D1, D2, D3, D4, D5, D6, D7, D8, D17 |
| 8 | 100 | Resistor_SMD:R_1206_3216Metric | R18, R21, R24, R27, R30, R33, R36, R39 |
| 8 | 100nF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 8 | NMOS | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | SS34 | Diode_SMD:D_SMA | D9, D10, D11, D12, D13, D14, D15, D16 |
| 6 | DI_IN_Connector | Connector_Phoenix_MC:PhoenixContact_MC_1,5_10-G-3.81_1x10_P3.81mm_Horizontal | J1, J2, J3, J4, J5, J6 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C9, CCOUT2, CIN3, CIN5 |
| 3 | 22 µF | Capacitor_SMD:C_0805_2012Metric | CIN2, COUT1, COUT2 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | CCOUT1, CIN4 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | RFBT1 |
| 1 | 13.7k | Resistor_SMD:R_0805_2012Metric | RFBB1 |
| 1 | 2.2 µF | Capacitor_SMD:C_0805_2012Metric | CIN1 |
| 1 | 6.8uH | Inductor_SMD:L_6.3x6.3_H3 | L1 |
| 1 | AP7361C-33E | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U18 |
| 1 | Conn_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J7 |
| 1 | Fuse | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | LMR51430 | Package_TO_SOT_SMD:SOT-23-6 | U17 |
| 1 | Q_PMOS | Package_TO_SOT_SMD:SOT-23 | Q9 |
Similar boards
- 2 layers151 × 158.2 mm

- 4 layers95 × 95 mm

Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
52 parts1.1kGPL-3.0 - 4 layers92 × 56 mm

REIN R1
rein-baremetal/REIN_R1_KiCad
Dual-MCU baremetal embedded development board featuring high-speed QSPI storage, hardware USB hub, and flexible power management. Open for PCB trace routing collaboration
177 parts2 - 2 layers83.1 × 34.9 mm

- 2 layers84.5 × 94.5 mm

- 4 layers145.8 × 130.1 mm

Regenerative braking
venatarch/regenerative_braking
Recover braking energy from a BLDC motor using bidirectional MOSFET switching.
217 parts - 4 layers123 × 113 mm

Pantiltslide full pwr
AMOVFC/PanTilt
Three projects live in this folder. They share NewLibrary.kicadsym, TMC2209.pretty and the same philosophy: nothing on the board needs precision placement, every active part is a module in a socket.
53 parts - 4 layers100 × 100 mm

DMXion 4port node
NEOgHacking/DMXion_4Port_Node
A 4 port dmx node with rdm funtionallity. Connects via ARTNET or sACN
275 parts2GPL-3.0
Questions
How big is the MY POWERFULL PLC PCB PCB?
It measures 230 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MY POWERFULL PLC PCB use?
115 parts, built around the LTV-357T, AP7361C-33E, SMBJ33A and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MY POWERFULL PLC PCB KiCad files?
From the siyovushdev/MY_POWERFULL_PLC_PCB repository on GitHub, at the commit this page was made from: the board is MY_POWERFULL_PLC_PCB-backups/MY_POWERFULL_PLC_PCB-2026-04-05_141827/MY_POWERFULL_PLC_PCB.kicad_pcb and its schematic 01_POWER_INPUT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MY POWERFULL PLC PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask siyovushdev before reusing the design.