2 layers
2 layers41 × 15 mm
Odometer
sinf/cemoto- Size
- 41 × 15 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 9
- Pads
- 33
- Tracks, vias
- 71, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 30 Sep 2022
- Updated
- 17 Jun 2023
Overview
Odometer is an open-source printed circuit board by sinf, from the sinf/cemoto repository on GitHub, published under the MIT licence. It is a 2-layer board of 41 × 15 mm with 9 parts on 9 nets, routed with 71 tracks and 6 vias.
It is built around the ATTINY13A-PU. Its parts include 4 connectors, 2 capacitors, 1 resistor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100u | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | 10k | Potentiometer_THT:Potentiometer_ACP_CA9-H5_Horizontal | RV1 |
| 1 | 1u | Capacitor_Tantalum_SMD:CP_EIA-3216-12_Kemet-S | C2 |
| 1 | ATtiny13A-P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J2 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | Conn_EV | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_LCD | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
Questions
How big is the Odometer PCB?
It measures 41 × 15 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Odometer use?
9 parts, built around the ATTINY13A-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Odometer KiCad files?
From the sinf/cemoto repository on GitHub, at the commit this page was made from: the board is odometer-pcb/odometer.kicad_pcb and its schematic odometer-pcb/odometer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Odometer design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from sinf/cemoto
1Similar boards
- 2 layers99.7 × 63.9 mm
NES CN ROM-256-05
emeargt/nes-cnrom
KiCad project for NES-CN-ROM-256-05 cartridge schematic and PCB
17 parts31CC-BY-SA-4.0 - 2 layers100 × 61.4 mm
Cart
digilogistist/The-Open-Source-USB-NES-Project
USB-NES and NES-FASTGFX product engineering repository
38 parts24CC0-1.0 - 2 layers100 × 100 mm
- 2 layers22.9 × 30.7 mm
- 4 layers243.8 × 243.8 mm
- 6 layers100.1 × 112 mm
Picones
WiiMake/picones
In the last 40 years, technology has advanced to the point were what used to be done in hardware can now be done in software. This project uses an rp2350 to emulate a ROM chip on an NES Cartridge.
59 parts1 - 2 layers27.9 × 15.2 mm
- 2 layers140 × 60 mm
A277d led tachometer
bazsimarkus/a277d-led-tachometer
An analog LED tachometer controlled by an East German A277D chip (clone of UAA180), featuring an integrated ATtiny13A-based digital ignition pulse generator for testing.
61 parts