Skip to the content
4 layers120 × 120 mmPsu, the printed circuit board in 3D

My KICAD footprint library

Size
120 × 120 mm
Copper layers
4
Thickness
1.6 mm
Parts
135
Nets
45
Pads
315
Tracks, vias
379, 32
Pours
4
Routed
Yes
KiCad
KiCad 4
Created
21 Jun 2017
Updated
21 Jun 2017

Overview

Psu is an open-source printed circuit board by simonmeaden, from the simonmeaden/footprints repository on GitHub. It is a 4-layer board of 120 × 120 mm with 135 parts on 45 nets, routed with 379 tracks and 32 vias.

It is built around the MAX743EWE+, FDS6690AS and FDS6612A, with the B240 among its other parts. Its parts include 31 capacitors, 18 resistors, 6 transistors, 5 inductors and 2 ICs. It belongs with the power boards of this library.

Main components

4

README

README.md

footprints

My KICAD footprint library

Parts

135
QtyValueFootprintReferences
70.01uFCapacitors_SMD:C_0805C7, C9, C10, C15, C16, C23, C29
7TESTMeasurement_Points:Measurement_Point_Square-TH_BigTP1, TP2, TP3, TP4, TP5, TP6, TP7
4100KResistors_SMD:R_0805R2, R3, R4, R17
42.2uFCapacitors_SMD:C_0805C2, C11, C13, C21
4FDS6690ASMosfet_Special_Pinout:FDS6690ASQ2, Q3, Q4, Q5
30.1uFCapacitors_SMD:C_0805C4, C18, C24
2100uFCapacitors_Tantalum_SMD:CP_Tantalum_Case-X_EIA-7343-43_ReflowC25, C31
2100uHInductors:Inductor_TDK_VLCF5020_SeriesL3, L4
210KResistors_SMD:R_0805R8, R12
210uFCapacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_ReflowC26, C36
2150uFCapacitors_SMD:CP_Elec_6.3x7.7C6, C14
215RResistors_SMD:R_0805R1, R16
218K2Resistors_SMD:R_0805R9, R11
21uFCapacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_ReflowC27, C37
2330RResistors_SMD:R_0805R7, R13
24uHInductors:Inductor_Murata_3900_SeriesL1, L2
2FDS6612AMosfet_Special_Pinout:FDS6612AQ1, Q6
2TBDCapacitors_SMD:C_0805C8, C17
11K8Resistors_SMD:R_0805R6
12.2uFCapacitors_SMD:CP_Elec_6.3x7.7C1
120RPotentiometer:Potentiometer_Bourns_3362PR31
12200pFCapacitors_SMD:C_0805C20
122uFCapacitors_SMD:C_0805C12
122uF TantalumCapacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_ReflowC32
122uHInductors:Inductor_TDK__SLF_SeriesL6
128K8Resistors_SMD:R_0805R15
12K7Resistors_SMD:R_0805R14
13300pFCapacitors_SMD:C_0805C19
13900pFCapacitors_SMD:C_0805C5
13R92Resistors_SMD:R_0805R10
149K7Resistors_SMD:R_0805R5
16800pFCapacitors_SMD:C_0805C3
1B240schottky:B240M4
1CAT4139SMD_Packages:TSOT-23-5U5
1CONN_01X02Connector_Cambdenboss:CTBP9558_2AOSKT1
1Jumper 5jumper:SOLDER-JUMPER_2-WAYJP5
1LM2N_3.5_16Connector_Weidmuller:LM2N_16_2SKT2
1MAX743SMD_Packages:SO-16-WU3
1MBR530Diodes_SMD:D_SOD-123D2
1MBR630Diodes_SMD:D_SOD-123D1
1TPD51020regulator:TSSOP30U$3

The 76 most common of 135 parts.

More from simonmeaden/footprints

3

Similar boards

  • 2 layers56.9 × 19 mmMAX743 Breadboard Power Rail, the printed circuit board in 3D

    MAX743 Breadboard Power Rail

    Anika-C/MAX743-Converter

    A breadboard-compatible PCB design for a Dual-Output, Switch-Mode Voltage Regulator (+5V to ±15V or ±12V) using the MAX743 IC

    18 parts
  • 2 layers63.1 × 56.1 mmMicroPicoDrive, the printed circuit board in 3D

    MicroPicoDrive

    Silveriomrs/micropicodrive

    Internal Microdrive replacement for the Sinclair QL

    31 parts7MIT
  • 2 layers101.6 × 76.2 mmCameraBoard, the printed circuit board in 3D

    CameraBoard

    psas/lv3.1-avionics

    Avionics for the LV3.1 rocket

    68 parts5GPL-3.0
  • 4 layers70 × 70.5 mmPCB FINAL UPDATED, the printed circuit board in 3D

    PCB FINAL UPDATED

    bash227/ECG-Motor-Control-Power-Management-PCB

    A multi-function PCB integrating biomedical signal acquisition (ECG), DC motor control, and advanced power management for wearable applications.

    111 parts2MIT
  • 2 layers65 × 56 mmGreenhouse, the printed circuit board in 3D

    Greenhouse

    michaelbester/Raspberry_Pi_Hat

    PCB Design

    53 parts
  • 2 layers79.5 × 50 mmUltra Compact STM32-Smart Data Logger Gateway, the printed circuit board in 3D

    Ultra Compact STM32-Smart Data Logger Gateway

    sitlesh/Ultra-Compact-STM32-Smart-Data-Logger-Gateway

    KiCad-based 2-layer custom PCB design featuring an on-board Micro SD card slot (SPI), dual crystal oscillators (8MHz & 32.768kHz), and integrated power management. Includes production-ready Gerber and Drill files.

    53 parts
  • 4 layers60 × 80 mmLinuxCore v2, the printed circuit board in 3D

    LinuxCore v2

    turgayhopal/LinuxCore

    216 parts
  • 2 layers62.5 × 87.5 mmSame70, the printed circuit board in 3D

    Same70

    brengi/CESE-PCB

    Curso de Diseño de Circuitos Impresos de la Carrera de Especialización en Sistemas Embebidos

    72 parts7

Questions

How big is the Psu PCB?

It measures 120 × 120 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Psu use?

135 parts, built around the MAX743EWE+, FDS6690AS, FDS6612A and B240. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Psu KiCad files?

From the simonmeaden/footprints repository on GitHub, at the commit this page was made from: the board is Harwell/schematics/pcu/psu.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Psu design in my own project?

Its repository states no licence, so its author keeps all rights: ask simonmeaden before reusing the design.