Skip to the content
2 layersProcessor control unit, the printed circuit board in 3D

Processor control unit

simonmeaden/footprints

My KICAD footprint library

Full screenGitHub.kicad_pcb
Copper layers
2
Thickness
1.6 mm
Parts
219
Nets
567
Pads
1,097
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 4
Created
21 Jun 2017
Updated
21 Jun 2017

Overview

Processor control unit is an open-source printed circuit board by simonmeaden, from the simonmeaden/footprints repository on GitHub. It is a 2-layer board with 219 parts on 567 nets.

It is built around the ST232BDR, MAX3080CSD+T and CA3130E, with the MCP47FEB22A0-E/ST and BAS40-04 among its other parts. Its parts include 166 resistors, 13 ICs, 11 capacitors, 5 diodes and 2 connectors. It belongs with the PIC boards of this library.

Main components

5

README

README.md

footprints

My KICAD footprint library

Parts

219
QtyValueFootprintReferences
64147RResistors_SMD:R_0805R17, R133, R134, R135, R136, R141, R142, R143, R144, R165, R166, R167, R168, R173, R174, R175 +48
3210KResistors_SMD:R_0805R105, R106, R107, R114, R115, R116, R121, R122, R127, R128, R331, R332, R333, R340, R341, R342 +16
323K3Resistors_SMD:R_0805R100, R102, R104, R109, R111, R113, R118, R120, R124, R126, R326, R328, R330, R335, R337, R339 +16
3033KResistors_SMD:R_0805R101, R108, R110, R112, R117, R119, R123, R125, R325, R327, R329, R334, R336, R338, R343, R345 +14
16ACSL-6400SO16M1, M2, M3, M4, M5, M6, M7, M8, M9, M10, M11, M12, M13, M14, M15, M16
80.1uFCapacitors_SMD:C_0603C6, C7, C8, C10, C11, C12, C13, C14
8MCP23017SSmicrochip:SSOP28IC1, IC2, IC3, IC4, IC5, IC6, IC7, IC8
5BAS40-04zener:SOT23D1, D2, D3, D4, D5
4KEMET_AMAXIMUMcapacitor-kemet:3216-18WU$1, U$2, U$3, U$4
2120RResistors_SMD:R_0603R11, R12
218pFCapacitors_SMD:C_0603C4, C5
22K7Resistors_SMD:R_0805R131, R132
2CA3130SMD_Packages:SOIC-8-NU2, U4
2R33KResistors_SMD:R_0805R103, R347
10.01uFCapacitors_SMD:C_0603C9
110K0Resistors_SMD:R_0805R129
11K0Resistors_SMD:R_0805R130
12.2UhInductors:Inductor_Vishay_IHLP-2020BZ-11_SeriesU$6
1CONN_01X06Connectors_Molex:Molex_KK-6410-06_06x2.54mm_StraightP3
1CONN_01X32con-molex:503480-3200P1
1MAX3080CSDmaxim:SO14U$5
1MCP47FEB22A0SMD_Packages:TSSOP8U3
1PIC32MZXXXXEC_G_H_M_144-I_PLLQFP144_20X20MC-MLQFP144_20X20MC-MU9
1ST232BDRstmicroelectronics:SOIC127P600X175-16NU1

More from simonmeaden/footprints

3
  • 4 layers120 × 120 mmPsu, the printed circuit board in 3D

    Psu

    simonmeaden/footprints

    My KICAD footprint library

    135 parts
  • 4 layers120 × 40 mmLithiumioncharger, the printed circuit board in 3D

    Lithiumioncharger

    simonmeaden/footprints

    My KICAD footprint library

    127 parts

Similar boards

  • 2 layersEEG ESP, the printed circuit board in 3D

    EEG ESP

    ashvin-verma/BigBrainFinal

    Final Project for HOPE Fall '22. Low-cost EEG with 4 inputs and filtering.

    43 parts
  • 2 layers301.5 × 367.3 mmOSI 600D Superboard II Cherry Solder Mask, the printed circuit board in 3D

    OSI 600D Superboard II Cherry Solder Mask

    Bambelweeny57/OSI-600D-SuperBoard-II

    KiCad 10 recreation of the Ohio Scientific Superboard II Model 600 rev D (1980) with Cherry MX keyswitches, 27C16/2816 ROMs, full schematic and assembly guide.

    314 parts
  • 2 layers23.6 × 18.7 mmAudioToTTL, the printed circuit board in 3D

    AudioToTTL

    hansliss/AudioToTTL

    Audio to TTL adapter stage from my MIDI converter

    12 parts
  • 2 layersCable Detector module, the printed circuit board in 3D

    Cable Detector module

    mukhtarsafarofff/Cable-Detector-module

    Ca3130 BiMOS Op-amp based Cable Detector module

    12 parts
  • 2 layers102.9 × 59.7 mmCad10 april, the printed circuit board in 3D

    Cad10 april

    SaiRishithaDharoor/Ongoing-Call-Detector-kicad-simulation

    11 parts
  • 2 layers40 × 53.6 mmCanLite, the printed circuit board in 3D

    CanLite

    voltlog/CanLite

    ESP32 based CAN development board

    42 parts192GPL-3.0
  • 6 layers150 × 100 mmNV Meter rev b, the printed circuit board in 3D

    NV Meter rev b

    curtisseizert/Nanovoltmeter

    A low noise nanovoltmeter design files and code

    552 parts44
  • 2 layers85 × 50 mmAPPMC, the printed circuit board in 3D

    APPMC

    tdjastrzebski/All-Purpose-Power-Micro-Controller

    General purpose power controller, capable of driving soldering irons using different voltages and probe types.

    117 parts40

Questions

What parts does the Processor control unit use?

219 parts, built around the ST232BDR, MAX3080CSD+T, CA3130E and MCP47FEB22A0-E/ST. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Processor control unit KiCad files?

From the simonmeaden/footprints repository on GitHub, at the commit this page was made from: the board is Harwell/schematics/pcu/processor_control_unit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Processor control unit design in my own project?

Its repository states no licence, so its author keeps all rights: ask simonmeaden before reusing the design.