

POWER STATION
作品集仓库
- Size
- 40 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 36
- Pads
- 204
- Tracks, vias
- 195, 134
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Oct 2025
- Updated
- 2 Oct 2025
Overview
POWER STATION is an open-source printed circuit board by shydql, from the shydql/project repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 40 × 40 mm with 64 parts on 36 nets, routed with 195 tracks and 134 vias.
It is built around the TPS82130SIL, LM358 and XT30UPB-M, with the SY6280AAAC, 1N4148W-TP and 2N3904S-RTK/PS among its other parts. Its parts include 19 resistors, 18 capacitors, 8 ICs, 6 diodes and 3 connectors.
Main components
8TPS82130SIL
3V to 17V Input 3A Step-Down Converter MicroSiP™ Module with Integrated InductorTexas InstrumentsUncategorisedLM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierXT30UPB-M
--、Aviation model plug 0.65mΩ 15A DC 500V Gold Plated Male PA Yellow - Power connector / plug connectorAMASSPlugSY6280AAAC
SOT-23-5-40℃~+125℃ 1 2.4V~5.5V 2A 63mΩ Active High High Side Switch Overcurrent Protection(OCP)、Over Temperature Protection SOT-23-5 Power Distribution Switches ROHSSilergy CorpPower Distribution Switches1N4148W-TP
SOD-123-65℃~+150℃@(Tj) 1.25V@150mA 100V 150mA 1uA@75V 2A 400mW 4ns SOD-123 Switching Diodes ROHSMicro Commercial ComponentsSwitching Diodes2N3904S-RTK/PS
SOT-231 NPN 100 200mA 300MHz 300mV 350mW 40V 50nA 6V NPN SOT-23 Bipolar (BJT) ROHSKECBipolar (BJT)SMAJ13CA
DO-214AC(SMA)-55℃~+150℃ 13V 15.9V 18.6A@10/1000us 1uA 21.5V 400W@10/1000us Bidirectional IEC 61000-4-2 TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)SMAJ28CA
DO-214AC(SMA)-55℃~+150℃ 1uA 28V 34.4V 400W@10/1000us 45.4V 8.8A Bidirectional IEC 61000-4-2 TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
README
README.mdproject
作品集仓库
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10uF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3, C7, C8, C9, C16, C18, C19 |
| 7 | 100K | Resistor_SMD:R_0603_1608Metric | R1, R3, R5, R9, R12, R13, R14 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R4, R7, R8, R11 |
| 4 | MountingHole_Pad_MP | MountingHole:MountingHole_2.7mm_Pad_Via | H1, H1, H1, H1 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C4, C12, C13 |
| 3 | XT30UPB-M | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | U7, U8, U10 |
| 2 | 6.8K | Resistor_SMD:R_0603_1608Metric | R16, R19 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | SY6280AAAC | kicad_api_lib:SY6280AAAC | U4, U5 |
| 2 | USB_A | Connector_USB:USB_A_Molex_105057_Vertical | J2, J3 |
| 1 | 0.22uF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 1N4148W-TP | digikey-footprints:SOD-123 | D5 |
| 1 | 200K | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | 2N3904S-RTK/PS | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | 3.3nF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 4.7uF | Inductor_SMD:L_APV_APH1040 | L1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 400nF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 40K | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 51K | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 5K | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 70K | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | LED_0603-R | LED_SMD:LED_0603_1608Metric | LED1 |
| 1 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | LOGO | signal:robocon | G*** |
| 1 | SMAJ13CA | Diode_SMD:D_SMA | D4 |
| 1 | SMAJ28CA | Diode_SMD:D_SMA | D3 |
| 1 | SW_Nidec_CAS-120A1 | Button_Switch_SMD:Nidec_Copal_CAS-120A | SW1 |
| 1 | TPS82130 | Package_LGA:Texas_SIL0008D_MicroSiP-8-1EP_2.8x3mm_P0.65mm_EP1.1x1.9mm_ThermalVias | U3 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP2 |
| 1 | Thermistor_PTC | Resistor_SMD:R_2010_5025Metric | TH1 |
| 1 | ~ | RC:QFN-20_L4.0-W4.0-P0.50-BL_MPQ4436AGRE | U2 |
More from shydql/project
2- 4 layers73.9 × 63.8 mm

- 4 layers39.3 × 51.2 mm

Similar boards
- 4 layers32.5 × 105.2 mm

ZESP32
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
42 parts269 - 2 layers39.9 × 37.3 mm

Mynd esp board
makeTVee/MYNDlights
Adding lights to a Teufel Mynd bluetooth speaker
16 parts7BSD-2-Clause - 2 layers110 × 89 mm

- 4 layers135.2 × 25 mm

- 4 layers74.3 × 115.1 mm

- 2 layers60.6 × 24.1 mm

Blep audio
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
76 parts253GPL-3.0 - 4 layers174 × 104 mm

- 4 layers62 × 22.2 mm

UPduino v3.0
tinyvision-ai-inc/UPduino-v3.0
UPduino 3.0: new 4 layer layout, various other improvements
116 parts365MIT
Questions
How big is the POWER STATION PCB?
It measures 40 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the POWER STATION use?
64 parts, built around the TPS82130SIL, LM358, XT30UPB-M and SY6280AAAC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the POWER STATION KiCad files?
From the shydql/project repository on GitHub, at the commit this page was made from: the board is POWER-STATION/POWER-STATION.kicad_pcb and its schematic ADCV1.1/ProPrj_ADC读取_2025-05-24.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the POWER STATION design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).