4 layers39.3 × 51.2 mm
4 layers73.9 × 63.8 mm
H723zgt6
shydql/project作品集仓库
- Size
- 73.9 × 63.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 127
- Nets
- 197
- Pads
- 687
- Tracks, vias
- 1,507, 270
- Pours
- 19
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Oct 2025
- Updated
- 2 Oct 2025
Overview
H723zgt6 is an open-source printed circuit board by shydql, from the shydql/project repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 73.9 × 63.8 mm with 127 parts on 197 nets, routed with 1,507 tracks and 270 vias.
It is built around the MAX3485ED, SP3232EEN and TPS82130SIL, with the W25Q64JVSSIQ, BMI088 and TPS7A7001DDA among its other parts. Its parts include 41 resistors, 36 capacitors, 15 ICs, 12 connectors and 5 diodes. It belongs with the STM32 boards of this library.
Main components
12
MAX3485ED
SOP-8-40℃~+85℃ 1 1 10Mbps 1mA 3.135V~3.465V 32 Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTC Korea TAEJIN TechRS-485 / RS-422 ICs
SP3232EEN
SOP-160.3mA 0℃~+70℃ 2 2 250Kbps 3V~5.5V Automatic level shifting、Short-Circuit Protection Transceiver Yes ±8kV SOP-16 RS232 ICs ROHSJSMSEMIRS232 ICs
TPS82130SIL
3V to 17V Input 3A Step-Down Converter MicroSiP™ Module with Integrated InductorTexas InstrumentsUncategorised
W25Q64JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 150ms@(64KB) 2.7V~3.6V 20 Years 3ms 64Mbit SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
BMI088
LGA-16(3x4.5)-40℃~+85℃ Accelerometer Gyroscope LGA-16(3x4.5) Accelerometers ROHSBosch SensortecAccelerometers
TPS7A7001DDA
SO-8-40℃~+125℃ 1 2A 380mV@(2A) 500mV~5V 6.5V Adjustable Over Current Protection、Enable、Thermal Shutdown Positive SO-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsLinear Voltage Regulators (LDO)
XT30UPB-M
--、Aviation model plug 0.65mΩ 15A DC 500V Gold Plated Male PA Yellow - Power connector / plug connectorAMASSPlug
PESD1CAN,215-ES
SOT-23ESD And Surge Protection (TVS/ESD)ElecSuper
L125WVS-02PW
SMD,P=1.25mm,卧贴-40℃~+110℃ 1 1.25mm 1A 1x2P 2 2P 4.1mm 4.35mm 5.75mm 50V Beige Surface Mount, Right Angle SMD,P=1.25mm,卧贴 Wire To Board Connector ROHSDEALONWire To Board ConnectorAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
TS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile SwitchesREF3030AIDBZR
SOT-23-40℃~+125℃@(Ta) 25mA 3.05V~5.5V 3V 50uA 75ppm/℃ 94uVrms Fixed Series ±0.2% SOT-23 Voltage Reference ROHSTexas InstrumentsVoltage Reference
README
README.mdproject
作品集仓库
Parts
127| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C20, C24, C26, C43, C44, C45, C46, C47, C48, C49, C50, C51, C52, C53, C54, C55 |
| 11 | 100nF | RC:C0603 | C1, C2, C3, C4, C5, C6, C7, C8, C15, C16, C18 |
| 6 | 60R | Resistor_SMD:R_0603_1608Metric | R4, R7, R24, R25, R26, R27 |
| 6 | PESD1CAN_215 | RC:SOT23_PESD1_NEX | CR1, CR2, CR3, CR4, CR5, CR6 |
| 4 | 1K | Resistor_SMD:R_0603_1608Metric | R34, R35, R50, R51 |
| 4 | 1K | Capacitor_SMD:C_0603_1608Metric | R11, R12, R40, R41 |
| 3 | 22R | Resistor_SMD:R_0603_1608Metric | R30, R31, R39 |
| 3 | Conn_01x10_Socket | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J5, J8, J9 |
| 3 | Conn_02x20_Odd_Even | RC:CONN-SMD_40P-P0.80_XKB_X0812WVS-40AS-9TV01 | J1, J6, J7 |
| 3 | L125WVS-02PW | RC:GH1.25立贴 1x2pin | CN1, CN2, CN3 |
| 3 | ~ | Connector_JST:JST_XH_S4B-XH-SM4-TB_1x04-1MP_P2.50mm_Horizontal | U10, U11, U16 |
| 3 | ~ | mypcb:HVSON-8 | U2, U4, U6 |
| 2 | 1.4A_0603 | Inductor_SMD:L_0603_1608Metric | L3, L4 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R16, R17 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R36, R49 |
| 2 | 120 | Capacitor_SMD:C_0603_1608Metric | R14, R43 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C56, C57 |
| 2 | 3.9pF | RC:C0603 | C22, C25 |
| 2 | 4,7k | Capacitor_SMD:C_0603_1608Metric | R13, R42 |
| 2 | 4.7k | Capacitor_SMD:C_0603_1608Metric | R15, R44 |
| 2 | 4.7uF | Capacitor_SMD:C_1206_3216Metric | C9, C12 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R32, R33 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | L125WVS-02PW | RC:GH1.25卧贴 1x2Pin | CN4, CN5 |
| 2 | MAX3485 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8, U12 |
| 2 | TS-1088-AR02016 | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | BOOT, RESET |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R48 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C58 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R28 |
| 1 | 120R | Resistor_SMD:R_0603_1608Metric | R47 |
| 1 | 124K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 160K | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 220R 磁珠 | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 22R | Capacitor_SMD:C_0603_1608Metric | R45 |
| 1 | 22R | RC:C0603 | R38 |
| 1 | 22R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric | C11 |
| 1 | 3.3nF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 30.1K | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 30R | Resistor_SMD:R_1210_3225Metric | R46 |
| 1 | 5K | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | BMI088 | mypcb:PQFN50P450X300X100-16N | U9 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Fuse | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LED_0603-R | LED_SMD:LED_0603_1608Metric | LED1 |
| 1 | LOGO | signal:院徽 | G*** |
| 1 | REF3030AIDBZR | digikey-footprints:SOT-23-3 | VR1 |
| 1 | SMAJ12CA | Diode_SMD:D_SMA | D5 |
| 1 | SMAJ5.0CA | Diode_SMD:D_SMA | D1 |
| 1 | SP3232EEN | Package_SO:SOIC-16W_5.3x10.2mm_P1.27mm | IC1 |
| 1 | SS34 | Diode_SMD:D_SMA | D6 |
| 1 | STM32H723ZGTx | Package_QFP:LQFP-144_20x20mm_P0.5mm | U13 |
| 1 | TPS7A7001DDA | Package_SO:TI_SO-PowerPAD-8 | U19 |
| 1 | TPS82130 | Package_LGA:Texas_SIL0008D_MicroSiP-8-1EP_2.8x3mm_P0.65mm_EP1.1x1.9mm_ThermalVias | U15 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7051x | J2 |
| 1 | W25Q64JVSSIQ | RC:SOIC-8 | U17 |
| 1 | XT30UPB-M | RC:XT30U-M | U3 |
| 1 | ~ | Resistor_SMD:R_Array_Convex_4x0603 | R23 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-23 | Q3 |
More from shydql/project
2- 2 layers40 × 40 mm
Similar boards
- 4 layers130 × 130 mm
Smart Metering
frahncky/Smart-Metering
Analisador trifásico de energia e qualidade de energia com interface gráfica touchscreen.
230 parts - 2 layers95 × 70 mm
- 4 layers25 × 100 mm
Mini SiD
Safecast/bGeigieScint
The board features an integrated boost converter + linear regulator topology for SiPM bias generation:
48 parts2 - 6 layers58 × 72 mm
12vhpwr standard
nathanfraske/CEC-Platform
ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").
110 partsApache-2.0 - 2 layers85.5 × 99.5 mm
- 4 layers100 × 75 mm
OpenAirScope
emertcakir/OpenAirScope
Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.
282 parts26MIT - 4 layers80 × 96 mm
- 4 layers124.7 × 64.3 mm
RP2040 SOS band
abhinav937/RP2040_SOS_band
PCB design files for RP2040 based SmartWatch. It features an accelerometer, a GPS module and a cellular module.
107 parts3
Questions
How big is the H723zgt6 PCB?
It measures 73.9 × 63.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the H723zgt6 use?
127 parts, built around the MAX3485ED, SP3232EEN, TPS82130SIL and W25Q64JVSSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the H723zgt6 KiCad files?
From the shydql/project repository on GitHub, at the commit this page was made from: the board is h723zgt6/h723zgt6.kicad_pcb and its schematic ADCV1.1/ProPrj_ADC读取_2025-05-24.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the H723zgt6 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).