Skip to the content
2 layers95 × 70 mmVibrating transmitters product, the printed circuit board in 3D

Vibrating transmitters product

lessthan00/vibrating_transmitters

kicad vibrating_transmitters

Size
95 × 70 mm
Copper layers
2
Thickness
1.6 mm
Parts
93
Nets
68
Pads
386
Tracks, vias
1,102, 72
Pours
528
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 May 2025
Updated
28 May 2025

Overview

Vibrating transmitters product is an open-source printed circuit board by lessthan00, from the lessthan00/vibrating_transmitters repository on GitHub. It is a 2-layer board of 95 × 70 mm with 93 parts on 68 nets, routed with 1,102 tracks and 72 vias.

It is built around the OPA2244UA, ADXL345-EP and AMS1117-3.3, with the HT7333, LDI1117-3.3U and TLV70450DBVR among its other parts. Its parts include 27 capacitors, 21 connectors, 17 resistors, 14 diodes and 7 ICs. It belongs with the STM32 boards of this library.

Main components

12

README

README.md

vibrating_transmitters

依赖的项目:
https://github.com/lessthan00/ADXL345BCCZ-RL7_a
https://github.com/lessthan00/current-to-voltage-loop
https://github.com/lessthan00/HT7333
https://github.com/lessthan00/nucleo-stm32-pin32-kicad-b
https://github.com/lessthan00/TLV70450DBVR

主意事项

控制电流损耗

SMF3.3CA 反向漏电流Ir 500uA
SMAJ5.0CA Ir 800uA
SMAJ36CA Ir 1uA

慎重选择

LED 都去掉,驱动LED 要消耗大约1mA

MCU选择

STM32L432KCBU6
PIN31->GND
PIN16->GND
PIN33->GND

通讯引脚选择

PA3->GPIO_down
PA4->DAC1_OUT1
PA5->SPI1_SCK
PA6->SPI1_MISO
PA7->SPI1_MOSI
PA8->INT2
PA9->INT1

底板绘制

引入接口
PCB引入模块的SVG图片,以对准位置

最后Gerber文件生成

所有模块加底板画成一个大板子->转嘉立创打板.

Parts

93
QtyValueFootprintReferences
14100nFPCM_Capacitor_SMD_AKL:C_1206_3216MetricC2, C2, C2, C3, C3, C3, C4, C4, C4, C4, C5, C6, C7, C9
810uFPCM_Capacitor_SMD_AKL:C_1206_3216MetricC1, C1, C1, C1, C2, C3, C3, C5
8Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J2, J3, J3, J4, J5, J6, J8
710KPCM_Resistor_SMD_AKL:R_1206_3216MetricR1, R1, R2, R3, R4, R4, R5
4Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1, J1, J1, J12
35.1KPCM_Resistor_SMD_AKL:R_1206_3216MetricR1, R2, R3
3Conn_01x15Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_VerticalJ5, J7, J7
3SMAJ5.0CAPCM_Diode_SMD_AKL:D_SMA_TVSD1, D1, D2
3SMF3.3CAPCM_Diode_SMD_AKL:D_SOD-123FD2, D2, D2
222pFPCM_Capacitor_SMD_AKL:C_0603_1608MetricC6, C8
2600R@100MhzPCM_Inductor_SMD_AKL:L_1206_3216MetricFB1, FB2
2Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ3, J3
2Conn_02x05_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ9, J9
110nFPCM_Capacitor_SMD_AKL:C_1206_3216MetricC1
11KPCM_Resistor_SMD_AKL:R_1206_3216MetricR7
11nFPCM_Capacitor_SMD_AKL:C_1206_3216MetricC4
1250RPCM_Resistor_SMD_AKL:R_1206_3216MetricR6
1300pFPCM_Capacitor_SMD_AKL:C_1206_3216MetricC2
13V3redPCM_LED_SMD_AKL:LED_1206_3216MetricLED3
15VredPCM_LED_SMD_AKL:LED_1206_3216MetricLED2
1600Ω100MhzPCM_Ferrite_SMD_AKL:Ferrite_1206_3216MetricFB1
1ADXL345Package_LGA:LGA-14_3x5mm_P0.8mm_LayoutBorder1x6yU1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1Conn_01x07Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ16
1Crystal_Generic_GND24Crystal:Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mmX1
1HT7333PCM_Package_TO_SOT_SMD_AKL:SOT-89-3U1
1LDI1117-3.3UPCM_Package_TO_SOT_SMD_AKL:SOT-89-3U2
1MB6FPCM_Diode_SMD_AKL:Diode_Bridge_MBFD1
1OPA2244UAPCM_Package_SO_AKL:SO-8_3.9x4.9mm_P1.27mmU1
1P4SMAJ36CAPCM_Diode_SMD_AKL:D_SMA_TVSD2
1Q_NPN_BCEPCM_Package_TO_SOT_SMD_AKL:SOT-89-3_BigPadsQ1
1Q_NPN_Generic_BECPackage_TO_SOT_SMD:SOT-23-3Q2
1RaPCM_Resistor_SMD_AKL:R_1206_3216MetricR2
1RbPCM_Resistor_SMD_AKL:R_1206_3216MetricR3
1RcPCM_Resistor_SMD_AKL:R_1206_3216MetricR4
1RdPCM_Resistor_SMD_AKL:R_1206_3216MetricR5
1RePCM_Resistor_SMD_AKL:R_1206_3216MetricR8
1SMAJ12CAPCM_Diode_SMD_AKL:D_SMA_TVSD1
1SMAJ24CAPCM_Diode_SMD_AKL:D_SMA_TVSD1
1STM32L432K_B-C_UxLibrary:LQFP-32_7x7mm_P0.8mm_QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mmU1
1SW_PushButton_Switch_THT:SW_PUSH_6mm_H7.3mmSW1
1TLV70450DBVRPackage_TO_SOT_SMD:SOT-23-5U1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01AJ1
1greenPCM_LED_SMD_AKL:LED_1206_3216MetricLED4
1redPCM_LED_SMD_AKL:LED_1206_3216MetricLED1

More from lessthan00/vibrating_transmitters

1

Similar boards

  • 2 layers26 × 23 mmADXL345BCCZ, the printed circuit board in 3D

    ADXL345BCCZ

    lessthan00/ADXL345BCCZ_RL7_a

    kicad ADXL345 IIC SPI model

    18 parts
  • 2 layers17 × 19 mmHT7333, the printed circuit board in 3D

    HT7333

    lessthan00/HT7333

    kicad LDO vin12V vout3.3V iout250mA iq3uA

    8 parts
  • 2 layers19 × 19 mmRT9013 33GB, the printed circuit board in 3D

    RT9013 33GB

    lessthan00/RT9013_33GB

    RT901333GB LDO VIN 5.5V VOUT 3.3V IOUT 0.5A package SOT-23-5 accuracy 2% IQ 50uA VD 250mV@500mA ENL 0.6V ENH 1.6V IEN 0.1uA -> 100K电阻

    10 parts
  • 4 layers75.7 × 34 mmSDT board, the printed circuit board in 3D

    SDT board

    bartkepl/SDT_board

    Benchtop thermometer with SCPI and USB.

    41 partsMIT
  • 6 layers300 × 245 mmAkd safe source gateway, the printed circuit board in 3D

    Akd safe source gateway

    zinedkahitaf-lang/AKD-SAFE-SourceControl

    Infrastructure-Based Active Engineering Safety Platform. Move the safety burden from the worker to the hazard. Engineering prototype - not a certified safety device.

    316 parts
  • 4 layers130 × 130 mmSmart Metering, the printed circuit board in 3D

    Smart Metering

    frahncky/Smart-Metering

    Analisador trifásico de energia e qualidade de energia com interface gráfica touchscreen.

    230 parts
  • 4 layers73.9 × 63.8 mmH723zgt6, the printed circuit board in 3D

    H723zgt6

    shydql/project

    作品集仓库

    127 partsGPL-3.0
  • 6 layers90 × 89 mmModular processing board, the printed circuit board in 3D

    Modular processing board

    igorwolfs/modular-processing-hw

    MCU Breakout board with Hirose BM28B connector

    177 parts1

Questions

How big is the Vibrating transmitters product PCB?

It measures 95 × 70 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Vibrating transmitters product use?

93 parts, built around the OPA2244UA, ADXL345-EP, AMS1117-3.3 and HT7333. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Vibrating transmitters product KiCad files?

From the lessthan00/vibrating_transmitters repository on GitHub, at the commit this page was made from: the board is product/vibrating_transmitters_product.kicad_pcb and its schematic PCB/vibrating_transmitters_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Vibrating transmitters product design in my own project?

Its repository states no licence, so its author keeps all rights: ask lessthan00 before reusing the design.