Skip to the content
12

SMAJ24CA

GOODWORKExtended

-55℃~+150℃ 10.3A 24V 26.7V 38.9V 400W 5uA Bidirectional TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHS

Part id
goodwork/SMAJ24CA
Category
ESD And Surge Protection (TVS, ESD)
Package
DO-214AC(SMA)
Pins
2
In stock
161,252 at JLCPCB (C908825)
Used on
36 open-source boards

Overview

The SMAJ24CA is an ESD And Surge Protection made by GOODWORK in a DO-214AC(SMA) package with 2 pins. -55℃~+150℃ 10.3A 24V 26.7V 38.9V 400W 5uA Bidirectional TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Diode:SMAJ24CA, from KiCad's library) and its footprint (Diode_SMD:D_SMA, from KiCad's library), ready for a KiCad board. 161,252 are in stock at JLCPCB (part C908825). 36 open-source boards in 25 repositories on GitHub use it.

Symbol

Diode:SMAJ24CAFrom KiCad's library

Footprint

12
Diode_SMD:D_SMAFrom KiCad's library

Pinout

2
The pins of the SMAJ24CA
PinNameType
1A1Passive
2A2Passive

Open-source boards using it

36See all 36
  • 4 layers55 × 55 mmCaw bms, the printed circuit board in 3D

    Caw bms

    noxrick91/caw-bms

    锂电池管理系统

    154 parts228GPL-3.0
  • 2 layers34 × 96 mmGem solder, the printed circuit board in 3D

    Gem solder

    arlenko/gem-solder

    💎 DIY soldering iron controller

    114 parts12CERN-OHL-S-2.0
  • 6 layers158 × 174 mmTritonECU Main, the printed circuit board in 3D

    TritonECU Main

    alpauna/TritonECU

    ESP32-S3 engine control unit — fuel injection, ignition timing, wideband O2 (CJ125/LSU 4.9), dashboard, and MQTT telemetry

    457 parts10
  • 2 layers100 × 75 mmDisplay, the printed circuit board in 3D

    Display

    DLaxV-Community-Projects-Hub/Open-Shot-Clock

    Build your own DIY Shot Clock

    209 parts5CERN-OHL-P-2.0
  • 4 layers84 × 55 mmGrblPANEL, the printed circuit board in 3D

    GrblPANEL

    dresco/grblpanel_main_board

    KiCad implementation of a grblPANEL control board

    143 parts2
  • 2 layers88.8 × 76 mmArch Bridge, the printed circuit board in 3D

    Arch Bridge

    SeraphimlabsLLC/Arch_Bridge

    DCC-EX to Loconet accessory bus interface

    102 parts2AGPL-3.0
  • 4 layers81 × 90.3 mmMildly Overkill, the printed circuit board in 3D

    Mildly Overkill

    hackepeter101/Mildly-Overkill

    todo.md was written entirely by AI. It's the list of everything it found. I read the suggestions, double-check them, and then fix them myself in KiCad, usually while muttering.

    138 parts1
  • 2 layers105 × 79 mmWaveform gen, the printed circuit board in 3D

    Waveform gen

    Aryan-Kodan/Function_generator

    A custom function generator designed using STM32F103, KiCad, and LTspice. The project implements a complete analog signal conditioning chain with adjustable gain, DC offset control, output buffering, and protection…

    29 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SMAJ24CA?

Yes. The symbol is Diode:SMAJ24CA and the footprint Diode_SMD:D_SMA, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SMAJ24CA?

DO-214AC(SMA), with 2 pins. Its footprint is drawn on this page.

Where is the SMAJ24CA datasheet?

GOODWORK publishes it: the Datasheet link on this page opens it.

Where can I order the SMAJ24CA?

JLCPCB lists it as part C908825, with 161,252 in stock; the sellers' links on this page open their listings.

What can replace the SMAJ24CA?

Parts like it in the library: the SMAJ24A by GOODWORK, the SMAJ24CA by hongjiacheng, the SMAJ24A by hongjiacheng and the SMAJ24A/TR13 by Brightking. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SMAJ24CA?

36 boards in 25 repositories on GitHub; the most starred are listed on this page, with their KiCad files.