Skip to the content
11 layers64 × 41.4 mmESPCB, the printed circuit board in 3D

An ESP32 series based PCB for implementing BMS comms to Solar Inverters

Size
64 × 41.4 mm
Copper layers
11
Thickness
1.6 mm
Parts
13
Nets
67
Pads
114
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 8.99 (file 20240706)
Created
22 Aug 2024
Updated
4 Feb 2025

Overview

ESPCB is an open-source printed circuit board by shvmm, from the shvmm/espcb-bms-comms repository on GitHub, published under the LGPL-2.1 licence. It is an 11-layer board of 64 × 41.4 mm with 13 parts on 67 nets.

It is built around the CH340C, ESP32-S3-WROOM-1-N8 and SN65HVD230D, with the IH4805SH and AMS1117-3.3 among its other parts. Its parts include 4 ICs, 2 connectors and 1 switch. It belongs with the power boards and the ESP32 boards of this library.

Main components

5

README

README.md

espcb-bms-comms

An ESP32 series based PCB facilitating BMS comms to Solar Inverters

Features

  1. Choice of CAN/RS485 for Inverter Communication
  2. When using CAN, the choice is SN65HVD230 or TJA1050/1051T
  3. Three PCB variants based on: ESP32 DevKit, Seeed Studio XIAO S3, or the S3-WROOM-1 module
  4. Can be powered either by USB-C, AC power supply, or LV Battery itself (mutually exclusive)
  5. BMS connection through either UART, BLE ,CAN or RS485
  6. Provision for 120Ohm Termination resistor jumper select

References/Sources/Insights

  1. https://github.com/Sleeper85/esphome-jk-bms-can
  2. https://kicad-downloads.s3.cern.ch/index.html?prefix=windows/nightly/
  3. https://github.com/syssi/esphome-jk-bms

Parts

13
QtyValueFootprintReferences
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U4
1CH340CPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU2
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalCAN_pin1
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1ESP32-S3-WROOM-1PCM_Espressif:ESP32-S3-WROOM-1U3
1IH4805SConverter_DCDC:Converter_DCDC_XP_POWER-IHxxxxDH_THTPS1
1SN65HVD230Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1SW_DIP_x04Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mmSW1
1Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalCAN_screw1
1USB_C_Plug_USB2.0Connector_USB:USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_HorizontalP1

The 10 most common of 13 parts.

More from shvmm/espcb-bms-comms

1
  • 2 layers67.3 × 57.2 mmXIAO, the printed circuit board in 3D

    XIAO

    shvmm/espcb-bms-comms

    An ESP32 series based PCB for implementing BMS comms to Solar Inverters

    25 partsLGPL-2.1

Similar boards

  • 4 layers60 × 85 mmVehicleVCU PCB, the printed circuit board in 3D

    VehicleVCU PCB

    nsm81/VehicleVCU_PCB

    A Vehicle Control Unit provides multiple CANBUS transceivers for communication within a vehicle.

    86 parts1
  • 4 layers75 × 90 mmVehiclePrecharge PCB, the printed circuit board in 3D

    VehiclePrecharge PCB

    nsm81/VehiclePrecharge_PCB

    The precharge board contains the precharge resistors, precharge relay, main relay drivers (with economisers), and a controlling micro.

    56 parts
  • 4 layers90 × 35 mmVehicleCurrentSense PCB, the printed circuit board in 3D

    VehicleCurrentSense PCB

    nsm81/VehicleJunctionBox_PCBs

    The junction box is an intermediate stage between the accumulator and inverter. It contains an HVD, a current sensor, discharge circuitry, TSAL and TSMPs.

    64 parts1
  • 4 layers110 × 80 mmPNP MOBO V2, the printed circuit board in 3D

    PNP MOBO V2

    GabrielD98/PickUS_and_PlacUS

    pick and place de PCB pour projet S4 de robotique

    126 parts5MIT
  • 2 layers133 × 123 mmMissionOrderFile, the printed circuit board in 3D

    MissionOrderFile

    wasa-rockoon/WOBC

    WASAロケットプロジェクト 共通電装基盤

    534 parts1MIT
  • 2 layers60 × 33 mmCANect, the printed circuit board in 3D

    CANect

    GmenezesSilva/CANnect

    A basic USB-to-CAN converter

    24 parts
  • 4 layers50.8 × 81.3 mmEsp32-s3-with ken interface, the printed circuit board in 3D

    Esp32-s3-with ken interface

    kawashimaken/general-purpose-ken-interface

    A modular, multi-MCU prototyping platform with a unified pin-assignment standard and horizontally-stackable expansion boards.

    41 parts3MIT
  • 4 layers85 × 45 mmFlipperZeroESP32, the printed circuit board in 3D

    FlipperZeroESP32

    AleksaHeler/ESP32-Flipper-Zero-GPIO-Board

    A custom ESP32 board for Flipper Zero GPIO connector

    32 parts2

Questions

How big is the ESPCB PCB?

It measures 64 × 41.4 mm and has 11 copper layers, 1.6 mm thick.

What parts does the ESPCB use?

13 parts, built around the CH340C, ESP32-S3-WROOM-1-N8, SN65HVD230D and IH4805SH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESPCB KiCad files?

From the shvmm/espcb-bms-comms repository on GitHub, at the commit this page was made from: the board is ESPCB.kicad_pcb and its schematic ESPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESPCB design in my own project?

Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).