
ESPCB
shvmm/espcb-bms-comms
An ESP32 series based PCB for implementing BMS comms to Solar Inverters

An ESP32 series based PCB for implementing BMS comms to Solar Inverters
XIAO is an open-source printed circuit board by shvmm, from the shvmm/espcb-bms-comms repository on GitHub, published under the LGPL-2.1 licence. It is a 2-layer board of 67.3 × 57.2 mm with 25 parts on 65 nets, routed with 49 tracks and 0 vias.
It is built around the ESP32-S3-WROOM-1-N8 and SN65HVD230D. Its parts include 8 capacitors, 5 resistors, 4 connectors, 3 ICs and 3 switches. It belongs with the power boards and the ESP32 boards of this library.
An ESP32 series based PCB facilitating BMS comms to Solar Inverters
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1μF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C6, C7, C8 |
| 3 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R5 |
| 3 | 22μF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C5 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3 |
| 2 | Conn_01x07_Socket | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J1, J2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2, SW3 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | CAN_pin1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U3 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | SW_Wuerth_450301014042 | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | CAN_screw1 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4110 | P1 |

shvmm/espcb-bms-comms
An ESP32 series based PCB for implementing BMS comms to Solar Inverters

GabrielD98/PickUS_and_PlacUS
pick and place de PCB pour projet S4 de robotique





KogantiAnoop/OTA-pcb-testing
Test PCB and code for OTA updates and wireless communication via s3 esp32


It measures 67.3 × 57.2 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the ESP32-S3-WROOM-1-N8 and SN65HVD230D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shvmm/espcb-bms-comms repository on GitHub, at the commit this page was made from: the board is XIAO/XIAO.kicad_pcb and its schematic ESPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).