

SMARTMOTOR X
- Size
- 99.9 × 80.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 88
- Pads
- 297
- Tracks, vias
- 835, 139
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Sep 2026
- Updated
- 11 Sep 2026
Overview
SMARTMOTOR X is an open-source printed circuit board by RAJMISH04, from the RAJMISH04/SMARTMOTOR_X repository on GitHub. It is a 2-layer board of 99.9 × 80.5 mm with 78 parts on 88 nets, routed with 835 tracks and 139 vias.
It is built around the ESP32-S3-WROOM-1-N8, SN65HVD230D and AP2112K-3.3, with the DS3231MZ/V+, LIS3DH and BAT54 among its other parts. Its parts include 20 resistors, 15 capacitors, 8 connectors, 7 ICs and 6 diodes. It belongs with the ESP32 boards of this library.
Main components
7ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesSN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedDS3231MZ/V+
SOIC-8-40℃~+85℃ 2.3V~5.5V Built-in I2C Temperature compensation、Backup power management and battery charging、Alarm function、Locking and tamper-proof、Periodic interrupt output SOIC-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time ClocksLIS3DH
LGA-16(3x3)-40℃~+85℃ 1.71V~3.6V 16bit 500nA Accelerometer Motion event detection SPI、I2C X,Y,Z ±16g LGA-16(3x3) Accelerometers ROHSSTMicroelectronicsAccelerometersBAT54
SOT-23200mA 2uA@25V 30V 800mV@100mA Independent SOT-23 Schottky Diodes ROHSFOSANSchottky DiodesBC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP14, TP15, TP16 |
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric | C5, C7, C8, C9, C10, C11, C13, C14 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R5, R7, R8, R10, R14 |
| 4 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J3, J7, J8 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C6, C12, C15 |
| 3 | R | Resistor_SMD:R_0603_1608Metric | R15, R18, R19 |
| 2 | 100nf | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | 10uf | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R20 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric | R6, R17 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 1A Polyfuse | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 430 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 5m | Resistor_SMD:R_2512_6332Metric | RS1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | BAT54 | Package_TO_SOT_SMD:SOT-23 | D3 |
| 1 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BLUE_LED | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | Blue LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x03_Pin | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04 | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | DS3231MZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U2 |
| 1 | GREEN_LED | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | INA226 | Package_SO:TSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LIS3DH | Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U5 |
| 1 | MAX31865xAP | Package_SO:SSOP-20_5.3x7.2mm_P0.65mm | U4 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Molex_104031-0811 | J6 |
| 1 | RED_LED | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | RTC_INT | TestPoint:TestPoint_Pad_D1.5mm | TP13 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
Similar boards
- 4 layers80 × 55 mm

- 6 layers133.1 × 133.1 mm

AERIS H743-PCB
7903555032/AERIS-H743-PCB
A 6-layer STM32H743-based embedded development and flight-control/data-logging PCB designed as a practical hardware-design and PCB-layout project.
114 parts1 - 2 layers

Pokegotchi
TrevorLee01/pokegotchi---fallout-2026
BOM INCLUDED IN THE FILES! "BOM.csv", bottom of this README, or: https://docs.google.com/spreadsheets/d/1ZSV7nk1klidvS7acBAQEKFNUly9adzhBfaWMznL6cg/edit?gid=0#gid=0
25 parts - 4 layers102 × 34 mm

Netscore
arcticlula/Netscore
Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.
115 partsMIT - 2 layers68 × 68 mm

SensactUpControl
klaus-liebler/sensact
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…
50 parts4Apache-2.0 - 2 layers45.6 × 40.3 mm

- 2 layers96 × 38 mm

Control module
gabebuckmaster/nixie_clock
A minimalist nixie tube clock design in a cnc-machined hardwood case using IN12B tubes.
74 parts2MIT - 2 layers66.6 × 41.3 mm

UPIC46
emertcakir/uPIC46
PIC18F46K22-based versatile development board with CAN, RS-485, EEPROM, RTC, and user LEDs
111 parts2MIT
Questions
How big is the SMARTMOTOR X PCB?
It measures 99.9 × 80.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SMARTMOTOR X use?
78 parts, built around the ESP32-S3-WROOM-1-N8, SN65HVD230D, AP2112K-3.3 and DS3231MZ/V+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SMARTMOTOR X KiCad files?
From the RAJMISH04/SMARTMOTOR_X repository on GitHub, at the commit this page was made from: the board is SMARTMOTOR_X.kicad_pcb and its schematic CAN_Interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SMARTMOTOR X design in my own project?
Its repository states no licence, so its author keeps all rights: ask RAJMISH04 before reusing the design.