2 layers58 × 110 mm
2 layers58 × 110 mm
Utils output ui
shmoergh/moduleur222Fully analog DIY-friendly modular synth
- Size
- 58 × 110 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 42
- Pads
- 125
- Tracks, vias
- 335, 580
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 1 Jun 2025
- Updated
- 27 Oct 2026
Overview
Utils output ui is an open-source printed circuit board by shmoergh, from the shmoergh/moduleur repository on GitHub. It is a 2-layer board of 58 × 110 mm with 39 parts on 42 nets, routed with 335 tracks and 580 vias.
It is built around the SMAJ5.0CA. Its parts include 8 connectors, 3 resistors, 2 transistors and 1 diode. It belongs with the audio and music boards of this library.
Main components
1README
modules/08-default-patch/README.mdHog Moduleur / Default Patch
An optional passive PCB which connects the modules of the Shmøergh Moduleur. This essentially creates a default patch which makes the Moduleur playable without patch cables.
How to Build
Module specific instructions
🐛 3D model bug in schematics
The current version of the 3D model has two bugs:
- It incorrectly uses dual row headers. Single row, long pin headers should be used on the BACK side of the PCB so that it can connect to the UI board through the holes on the Core board.
- The side of the ADSR+VCA1, ADSR+VCA2 and UTILS pin headers are wrong. All pin headers should be soldered on the BACK side of the PCB.
License
Open source licensed under CC BY-NC 4.0.
Feel free to fork, build, and tweak.
Latest module version
v1.0
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4, H5, H6 |
| 6 | PJ398SM | Shmoergh_Custom_Footprints:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J_CRUSH_IN1, J_CRUSH_OUT1, J_CRUSH_TRIG1, J_LFO_SQR1, J_LFO_TRI1, J_MAIN_IN1 |
| 3 | LOGO | Shmoergh_Logo:Gyeszno | G***, G***, G*** |
| 2 | Conn_01x01_Pin | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | J3, J8 |
| 2 | Conn_02x03_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J1, J7 |
| 2 | Red LED | LED_THT:LED_D3.0mm | D_DRIVE1, D_LFO1 |
| 1 | 100k | Shmoergh_Custom_Footprints:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 100k | Shmoergh_Custom_Footprints:Potentiometer_Bourns_Single-PTV09A | RV_DRIVE1 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | 2N3906 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q2 |
| 1 | 4.7k | Shmoergh_Custom_Footprints:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 47k | Shmoergh_Custom_Footprints:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | A10k | Shmoergh_Custom_Footprints:Potentiometer_Bourns_Single-PTV09A | RV_MAIN_VOLUME1 |
| 1 | A1M | Shmoergh_Custom_Footprints:Potentiometer_Bourns_Single-PTV09A | RV_CRUSH1 |
| 1 | A20k | Shmoergh_Custom_Footprints:Potentiometer_Bourns_Dual-PTV112-4 | RV_LFO_AMOUNT1 |
| 1 | A500k-1M | Shmoergh_Custom_Footprints:Potentiometer_Bourns_Single-PTV09A | RV_LFO_RATE1 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_02x04_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J2 |
| 1 | Conn_02x05_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J6 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | JP1 |
| 1 | PJ366ST | Shmoergh_Custom_Footprints:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J_MAIN_OUT1 |
| 1 | Red LED | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | D_DRIVE_FROM_CORE1 |
| 1 | SMAJ5.0CA | Diode_SMD:D_SMA | D1 |
Questions
How big is the Utils output ui PCB?
It measures 58 × 110 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Utils output ui use?
39 parts, built around the SMAJ5.0CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Utils output ui KiCad files?
From the shmoergh/moduleur repository on GitHub, at the commit this page was made from: the board is modules/06-utils-output/electronics/ui/utils-output-ui.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Utils output ui design in my own project?
Its repository states no licence, so its author keeps all rights: ask shmoergh before reusing the design.
More from shmoergh/moduleur
12- 2 layers60.5 × 110 mm
- 2 layers58 × 65 mm
- 2 layers58 × 65 mm
- 2 layers58 × 65 mm
- 2 layers58 × 65 mm
- 2 layers58 × 110 mm
- 2 layers58 × 110 mm
- 2 layers58 × 110 mm
- 2 layers58 × 110 mm
- 2 layers250 × 32 mm
- 2 layers58 × 110 mm
Similar boards
- 2 layers100 × 100 mm
Explorer
anyshake/explorer
🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.
266 parts100 - 2 layers131.5 × 83.5 mm
Badge esp32-s3
BYU-I-eBadge/e-badge
A hackable eBadge platform for students — a customizable, programmable electronics badge designed for hands-on learning and creative exploration throughout their academic journey.
218 parts2MIT - 4 layers80 × 80 mm
- 4 layers78.5 × 91 mm
- 4 layers95 × 95 mm
ControlBoard
ParadigmEngineering/igvc-2023-hardware
Intelligent Ground Vehicle Competition (Spring 2023) hardware for the Paradigm Engineering Student Group
175 parts1 - 4 layers71 × 64 mm
UWB
victorstoica114/UWB_Module_ESP_IDF
ESP-IDF 6.0.2 firmware for the custom UWB Module V1.0 Rev.B, based on an ESP32-S3-WROOM-1-N16R8. The same application image runs on every module; persistent identity and runtime configuration select the role and active…
254 parts1 - 2 layers300.1 × 90.5 mm
Polyphonic synthesizer
vincentchen18/polyphonic-synthesizer
a 2 octave pcb musical instrument!!! :)))
76 parts1 - 4 layers92.1 × 56.7 mm
